| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 27 Jan 2021 00:00:49 +0200
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: Geert Uytterhoeven <geert+renesas@...der.be>
Cc: Vinod Koul <vkoul@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Dan Williams <dan.j.williams@...el.com>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
Wolfram Sang <wsa+renesas@...g-engineering.com>,
dmaengine@...r.kernel.org, devicetree@...r.kernel.org,
linux-renesas-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 4/4] dmaengine: rcar-dmac: Add support for R-Car V3U
Hi Geert,
Thank you for the patch.
On Mon, Jan 25, 2021 at 03:24:31PM +0100, Geert Uytterhoeven wrote:
> The DMACs (both SYS-DMAC and RT-DMAC) on R-Car V3U differ slightly from
> the DMACs on R-Car Gen2 and other R-Car Gen3 SoCs:
> 1. The per-channel registers are located in a second register block.
> Add support for mapping the second block, using the appropriate
> offsets and stride.
> 2. The common Channel Clear Register (DMACHCLR) was replaced by a
> per-channel register.
> Update rcar_dmac_chan_clear{,_all}() to handle this.
> As rcar_dmac_init() needs to clear the status before the individual
> channels are probed, channel index and base address initialization
> are moved forward.
>
> Inspired by a patch in the BSP by Phong Hoang
> <phong.hoang.wz@...esas.com>.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
> ---
> v2:
> - Use two separate named regions instead of an iomem[] array,
> - Drop rcar_dmac_of_data.chan_reg_block, check for
> !rcar_dmac_of_data.chan_offset_base instead,
> - Precalculate chan_base in rcar_dmac_probe().
> ---
> drivers/dma/sh/rcar-dmac.c | 74 ++++++++++++++++++++++++++++----------
> 1 file changed, 55 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c
> index 7a0f802c61e5152d..d9589eea98083215 100644
> --- a/drivers/dma/sh/rcar-dmac.c
> +++ b/drivers/dma/sh/rcar-dmac.c
> @@ -189,7 +189,8 @@ struct rcar_dmac_chan {
> * struct rcar_dmac - R-Car Gen2 DMA Controller
> * @engine: base DMA engine object
> * @dev: the hardware device
> - * @iomem: remapped I/O memory base
> + * @dmac_base: remapped base register block
> + * @chan_base: remapped channel register block (optional)
> * @n_channels: number of available channels
> * @channels: array of DMAC channels
> * @channels_mask: bitfield of which DMA channels are managed by this driver
> @@ -198,7 +199,8 @@ struct rcar_dmac_chan {
> struct rcar_dmac {
> struct dma_device engine;
> struct device *dev;
> - void __iomem *iomem;
> + void __iomem *dmac_base;
> + void __iomem *chan_base;
>
> unsigned int n_channels;
> struct rcar_dmac_chan *channels;
> @@ -234,7 +236,7 @@ struct rcar_dmac_of_data {
> #define RCAR_DMAOR_PRI_ROUND_ROBIN (3 << 8)
> #define RCAR_DMAOR_AE (1 << 2)
> #define RCAR_DMAOR_DME (1 << 0)
> -#define RCAR_DMACHCLR 0x0080
> +#define RCAR_DMACHCLR 0x0080 /* Not on R-Car V3U */
> #define RCAR_DMADPSEC 0x00a0
>
> #define RCAR_DMASAR 0x0000
> @@ -297,6 +299,9 @@ struct rcar_dmac_of_data {
> #define RCAR_DMAFIXDAR 0x0014
> #define RCAR_DMAFIXDPBASE 0x0060
>
> +/* For R-Car V3U */
> +#define RCAR_V3U_DMACHCLR 0x0100
> +
> /* Hardcode the MEMCPY transfer size to 4 bytes. */
> #define RCAR_DMAC_MEMCPY_XFER_SIZE 4
>
> @@ -307,17 +312,17 @@ struct rcar_dmac_of_data {
> static void rcar_dmac_write(struct rcar_dmac *dmac, u32 reg, u32 data)
> {
> if (reg == RCAR_DMAOR)
> - writew(data, dmac->iomem + reg);
> + writew(data, dmac->dmac_base + reg);
> else
> - writel(data, dmac->iomem + reg);
> + writel(data, dmac->dmac_base + reg);
> }
>
> static u32 rcar_dmac_read(struct rcar_dmac *dmac, u32 reg)
> {
> if (reg == RCAR_DMAOR)
> - return readw(dmac->iomem + reg);
> + return readw(dmac->dmac_base + reg);
> else
> - return readl(dmac->iomem + reg);
> + return readl(dmac->dmac_base + reg);
> }
>
> static u32 rcar_dmac_chan_read(struct rcar_dmac_chan *chan, u32 reg)
> @@ -339,12 +344,23 @@ static void rcar_dmac_chan_write(struct rcar_dmac_chan *chan, u32 reg, u32 data)
> static void rcar_dmac_chan_clear(struct rcar_dmac *dmac,
> struct rcar_dmac_chan *chan)
> {
> - rcar_dmac_write(dmac, RCAR_DMACHCLR, BIT(chan->index));
> + if (dmac->chan_base)
Using dmac->chan_base to check if the device is a V3U seems a bit of a
hack (especially given that the field is otherwise unused). I'd prefer
adding a model field to struct rcar_dmac_of_data and struct rcar_dmac.
> + rcar_dmac_chan_write(chan, RCAR_V3U_DMACHCLR, 1);
> + else
> + rcar_dmac_write(dmac, RCAR_DMACHCLR, BIT(chan->index));
> }
>
> static void rcar_dmac_chan_clear_all(struct rcar_dmac *dmac)
> {
> - rcar_dmac_write(dmac, RCAR_DMACHCLR, dmac->channels_mask);
> + struct rcar_dmac_chan *chan;
> + unsigned int i;
> +
> + if (dmac->chan_base) {
> + for_each_rcar_dmac_chan(i, chan, dmac)
> + rcar_dmac_chan_write(chan, RCAR_V3U_DMACHCLR, 1);
> + } else {
> + rcar_dmac_write(dmac, RCAR_DMACHCLR, dmac->channels_mask);
> + }
> }
>
> /* -----------------------------------------------------------------------------
> @@ -1744,7 +1760,6 @@ static const struct dev_pm_ops rcar_dmac_pm = {
>
> static int rcar_dmac_chan_probe(struct rcar_dmac *dmac,
> struct rcar_dmac_chan *rchan,
> - const struct rcar_dmac_of_data *data,
> unsigned int index)
> {
> struct platform_device *pdev = to_platform_device(dmac->dev);
> @@ -1753,9 +1768,6 @@ static int rcar_dmac_chan_probe(struct rcar_dmac *dmac,
> char *irqname;
> int ret;
>
> - rchan->index = index;
> - rchan->iomem = dmac->iomem + data->chan_offset_base +
> - data->chan_offset_stride * index;
> rchan->mid_rid = -EINVAL;
>
> spin_lock_init(&rchan->lock);
> @@ -1842,6 +1854,7 @@ static int rcar_dmac_probe(struct platform_device *pdev)
> const struct rcar_dmac_of_data *data;
> struct rcar_dmac_chan *chan;
> struct dma_device *engine;
> + void __iomem *chan_base;
> struct rcar_dmac *dmac;
> unsigned int i;
> int ret;
> @@ -1880,9 +1893,24 @@ static int rcar_dmac_probe(struct platform_device *pdev)
> return -ENOMEM;
>
> /* Request resources. */
> - dmac->iomem = devm_platform_ioremap_resource(pdev, 0);
> - if (IS_ERR(dmac->iomem))
> - return PTR_ERR(dmac->iomem);
> + dmac->dmac_base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(dmac->dmac_base))
> + return PTR_ERR(dmac->dmac_base);
> +
> + if (!data->chan_offset_base) {
> + dmac->chan_base = devm_platform_ioremap_resource(pdev, 1);
> + if (IS_ERR(dmac->chan_base))
> + return PTR_ERR(dmac->chan_base);
> +
> + chan_base = dmac->chan_base;
> + } else {
> + chan_base = dmac->dmac_base + data->chan_offset_base;
> + }
> +
> + for_each_rcar_dmac_chan(i, chan, dmac) {
> + chan->index = i;
Now that chan->indew is set before calling rcar_dmac_chan_probe(), you
don't have to pass the index to rcar_dmac_chan_probe() anymore.
> + chan->iomem = chan_base + i * data->chan_offset_stride;
> + }
>
> /* Enable runtime PM and initialize the device. */
> pm_runtime_enable(&pdev->dev);
> @@ -1929,7 +1957,7 @@ static int rcar_dmac_probe(struct platform_device *pdev)
> INIT_LIST_HEAD(&engine->channels);
>
> for_each_rcar_dmac_chan(i, chan, dmac) {
> - ret = rcar_dmac_chan_probe(dmac, chan, data, i);
> + ret = rcar_dmac_chan_probe(dmac, chan, i);
> if (ret < 0)
> goto error;
> }
> @@ -1977,14 +2005,22 @@ static void rcar_dmac_shutdown(struct platform_device *pdev)
> }
>
> static const struct rcar_dmac_of_data rcar_dmac_data = {
> - .chan_offset_base = 0x8000,
> - .chan_offset_stride = 0x80,
> + .chan_offset_base = 0x8000,
> + .chan_offset_stride = 0x80,
> +};
> +
> +static const struct rcar_dmac_of_data rcar_v3u_dmac_data = {
> + .chan_offset_base = 0x0,
> + .chan_offset_stride = 0x1000,
> };
>
> static const struct of_device_id rcar_dmac_of_ids[] = {
> {
> .compatible = "renesas,rcar-dmac",
> .data = &rcar_dmac_data,
> + }, {
> + .compatible = "renesas,dmac-r8a779a0",
> + .data = &rcar_v3u_dmac_data,
> },
> { /* Sentinel */ }
> };
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists