[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210127094836.xwmhl7dd4oalykzz@sekiro>
Date: Wed, 27 Jan 2021 10:48:36 +0100
From: Ludovic Desroches <ludovic.desroches@...rochip.com>
To: Claudiu Beznea <claudiu.beznea@...rochip.com>
CC: <linus.walleij@...aro.org>, <robh+dt@...nel.org>,
<nicolas.ferre@...rochip.com>, <alexandre.belloni@...tlin.com>,
<linux-gpio@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/3] dt-bindings: pinctrl: at91-pio4: add slew-rate
On Mon, Jan 25, 2021 at 12:19:12PM +0200, Claudiu Beznea wrote:
> Document slew-rate DT binding for SAMA7G5.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea@...rochip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@...rochip.com>
Thanks
> ---
> .../devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
> index 265015bc0603..e2b861ce16d8 100644
> --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
> @@ -35,9 +35,11 @@ ioset settings. Use the macros from boot/dts/<soc>-pinfunc.h file to get the
> right representation of the pin.
>
> Optional properties:
> -- GENERIC_PINCONFIG: generic pinconfig options to use, bias-disable,
> -bias-pull-down, bias-pull-up, drive-open-drain, input-schmitt-enable,
> -input-debounce, output-low, output-high.
> +- GENERIC_PINCONFIG: generic pinconfig options to use:
> + - bias-disable, bias-pull-down, bias-pull-up, drive-open-drain,
> + input-schmitt-enable, input-debounce, output-low, output-high.
> + - for microchip,sama7g5-pinctrl only:
> + - slew-rate: 0 - disabled, 1 - enabled (default)
> - atmel,drive-strength: 0 or 1 for low drive, 2 for medium drive and 3 for
> high drive. The default value is low drive.
>
> --
> 2.7.4
>
Powered by blists - more mailing lists