linux-kernel - Re: [PATCHv3 1/6] firmware: stratix10-svc: add COMMAND_AUTHENTICATE

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <YBFW50LPP/yEbvEW@kroah.com>
Date:   Wed, 27 Jan 2021 13:04:55 +0100
From:   Greg KH <gregkh@...uxfoundation.org>
To:     richard.gong@...ux.intel.com
Cc:     mdf@...nel.org, trix@...hat.com, linux-fpga@...r.kernel.org,
        linux-kernel@...r.kernel.org, dinguyen@...nel.org,
        sridhar.rajagopal@...el.com, Richard Gong <richard.gong@...el.com>
Subject: Re: [PATCHv3 1/6] firmware: stratix10-svc: add
 COMMAND_AUTHENTICATE_BITSTREAM flag

On Mon, Jan 25, 2021 at 02:56:23PM -0600, richard.gong@...ux.intel.com wrote:
> From: Richard Gong <richard.gong@...el.com>
> 
> Add COMMAND_AUTHENTICATE_BITSTREAM command flag for new added bitstream
> authentication feature. Authenticating a bitstream is to make sure a signed
> bitstream has the valid signatures.
> 
> Except for the actual configuration of the device, the bitstream
> authentication works the same way as FPGA configuration does. If the
> authentication passes, the signed bitstream will be programmed into QSPI
> flash memory and will be expected to boot without issues.
> 
> Clean up COMMAND_RECONFIG_FLAG_PARTIAL flag by resetting it to 0, which
> aligns with the firmware settings.
> 
> Signed-off-by: Richard Gong <richard.gong@...el.com>
> ---
> v3: no change
> v2: new added
> ---
>  include/linux/firmware/intel/stratix10-svc-client.h | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)
> 
> diff --git a/include/linux/firmware/intel/stratix10-svc-client.h b/include/linux/firmware/intel/stratix10-svc-client.h
> index ebc2956..7ada1f2 100644
> --- a/include/linux/firmware/intel/stratix10-svc-client.h
> +++ b/include/linux/firmware/intel/stratix10-svc-client.h
> @@ -51,12 +51,17 @@
>  #define SVC_STATUS_NO_SUPPORT		6
>  
>  /*
> - * Flag bit for COMMAND_RECONFIG
> + * Flag for COMMAND_RECONFIG, in bit number
>   *
>   * COMMAND_RECONFIG_FLAG_PARTIAL:
> - * Set to FPGA configuration type (full or partial).
> + * Set for partial FPGA configuration.
> + *
> + * COMMAND_AUTHENTICATE_BITSTREAM:
> + * Set for bitstream authentication, which makes sure a signed bitstream
> + * has valid signatures before committing it to QSPI flash memory.
>   */
> -#define COMMAND_RECONFIG_FLAG_PARTIAL	1
> +#define COMMAND_RECONFIG_FLAG_PARTIAL	0

So is this a bugfix, changing this value to the correct one?

If so, shouldn't this be a stand-alone patch and get backported to
stable kernel releases?

If not, then no one uses this flag today?

thanks,

greg k-h