[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210128024549.GA3693@MiWiFi-R3L-srv>
Date: Thu, 28 Jan 2021 10:45:49 +0800
From: Baoquan He <bhe@...hat.com>
To: Mike Rapoport <rppt@...ux.ibm.com>
Cc: Łukasz Majczak <lma@...ihalf.com>,
Andrew Morton <akpm@...ux-foundation.org>, linux-mm@...ck.org,
linux-kernel@...r.kernel.org,
Radosław Biernacki <rad@...ihalf.com>,
Marcin Wojtas <mw@...ihalf.com>,
Alex Levin <levinale@...gle.com>,
Guenter Roeck <groeck@...gle.com>,
Jesse Barnes <jsbarnes@...gle.com>,
Chris Wilson <chris@...is-wilson.co.uk>,
"Sarvela, Tomi P" <tomi.p.sarvela@...el.com>
Subject: Re: PROBLEM: Crash after mm: fix initialization of struct page for
holes in memory layout
On 01/27/21 at 08:26pm, Mike Rapoport wrote:
> Hi Lukasz,
>
> On Wed, Jan 27, 2021 at 02:15:53PM +0100, Łukasz Majczak wrote:
> > Hi Mike,
> >
> > I have started bisecting your patch and I have figured out that there
> > might be something wrong with clamping - with comments out these lines
> > it started to work.
> > The full log (with logs from below patch) can be found here:
> > https://gist.github.com/semihalf-majczak-lukasz/3cecbab0ddc59a6c3ce11ddc29645725
> > it's fresh - I haven't analyze it yet, just sharing with hope it will help.
>
> Thanks, that helps!
>
> The first page is never considered by the kernel as memory and so
> arch_zone_lowest_possible_pfn[ZONE_DMA] is set to 0x1000. As the result,
> init_unavailable_mem() skips pfn 0 and then __SetPageReserved(page) in
> reserve_bootmem_region() panics because the struct page for pfn 0 remains
> poisoned.
It's a great finding and quick fix. Previously I tested my cleanup
patches based on Mike's commit 9ebeee59af4cdd4d ("mm: fix initialization
of struct page for holes in memory layout") on a hardware system,
didn't meet this crash. But this crash seems to be a always reproduced
issue, wondering why I didn't reproduce it.
>
> Can you please try the below patch on top of v5.11-rc5?
>
> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> index 783913e41f65..3ce9ef238dfc 100644
> --- a/mm/page_alloc.c
> +++ b/mm/page_alloc.c
> @@ -7083,10 +7083,11 @@ void __init free_area_init_memoryless_node(int nid)
> static u64 __init init_unavailable_range(unsigned long spfn, unsigned long epfn,
> int zone, int nid)
> {
> - unsigned long pfn, zone_spfn, zone_epfn;
> + unsigned long pfn, zone_spfn = 0, zone_epfn;
> u64 pgcnt = 0;
>
> - zone_spfn = arch_zone_lowest_possible_pfn[zone];
> + if (zone > 0)
> + zone_spfn = arch_zone_highest_possible_pfn[zone - 1];
> zone_epfn = arch_zone_highest_possible_pfn[zone];
>
> spfn = clamp(spfn, zone_spfn, zone_epfn);
>
>
> > diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> > index eed54ce26ad1..9f4468c413a1 100644
> > --- a/mm/page_alloc.c
> > +++ b/mm/page_alloc.c
> > @@ -7093,9 +7093,11 @@ static u64 __init
> > init_unavailable_range(unsigned long spfn, unsigned long epfn,
> > zone_spfn = arch_zone_lowest_possible_pfn[zone];
> > zone_epfn = arch_zone_highest_possible_pfn[zone];
> >
> > - spfn = clamp(spfn, zone_spfn, zone_epfn);
> > - epfn = clamp(epfn, zone_spfn, zone_epfn);
> > -
> > + //spfn = clamp(spfn, zone_spfn, zone_epfn);
> > + //epfn = clamp(epfn, zone_spfn, zone_epfn);
> > + pr_info("LMA DBG: zone_spfn: %llx, zone_epfn %llx\n",
> > zone_spfn, zone_epfn);
> > + pr_info("LMA DBG: spfn: %llx, epfn %llx\n", spfn, epfn);
> > + pr_info("LMA DBG: clamp_spfn: %llx, clamp_epfn %llx\n",
> > clamp(spfn, zone_spfn, zone_epfn), clamp(epfn, zone_spfn, zone_epfn));
> > for (pfn = spfn; pfn < epfn; pfn++) {
> > if (!pfn_valid(ALIGN_DOWN(pfn, pageblock_nr_pages))) {
> > pfn = ALIGN_DOWN(pfn, pageblock_nr_pages)
> >
> > Best regards,
> > Lukasz
> >
> >
> > śr., 27 sty 2021 o 13:15 Łukasz Majczak <lma@...ihalf.com> napisał(a):
> > >
> > > Unfortunately nothing :( my current kernel command line contains:
> > > console=ttyS0,115200n8 debug earlyprintk=serial loglevel=7
> > >
> > > I was thinking about using earlycon, but it seems to be blocked.
> > > (I think the lack of earlycon might be related to Chromebook HW
> > > security design. There is an EC controller which is a part of AP ->
> > > serial chain as kernel messages are considered sensitive from a
> > > security standpoint.)
> > >
> > > Best regards,
> > > Lukasz
> > >
> > > śr., 27 sty 2021 o 12:19 Mike Rapoport <rppt@...ux.ibm.com> napisał(a):
> > > >
> > > > On Wed, Jan 27, 2021 at 11:08:17AM +0100, Łukasz Majczak wrote:
> > > > > Hi Mike,
> > > > >
> > > > > Actually I have a serial console attached (via servo device), but
> > > > > there is no output :( and also the reboot/crash is very fast/immediate
> > > > > after power on.
> > > >
> > > > If you boot with earlyprintk=serial are there any messages?
> > > >
> > > > > Best regards
> > > > > Lukasz
> > > > >
> > > > > śr., 27 sty 2021 o 11:05 Mike Rapoport <rppt@...ux.ibm.com> napisał(a):
> > > > > >
> > > > > > Hi Lukasz,
> > > > > >
> > > > > > On Wed, Jan 27, 2021 at 10:22:29AM +0100, Łukasz Majczak wrote:
> > > > > > > Crash after mm: fix initialization of struct page for holes in memory layout
> > > > > > >
> > > > > > > Hi,
> > > > > > > I was trying to run v5.11-rc5 on my Samsung Chromebook Pro (Caroline),
> > > > > > > but I've noticed it has crashed - unfortunately it seems to happen at
> > > > > > > a very early stage - No output to the console nor to the screen, so I
> > > > > > > have started a bisect (between 5.11-rc4 - which works just find - and
> > > > > > > 5.11-rc5),
> > > > > > > bisect results points to:
> > > > > > >
> > > > > > > d3921cb8be29 mm: fix initialization of struct page for holes in memory layout
> > > > > > >
> > > > > > > Reproduction is just to build and load the kernel.
> > > > > > >
> > > > > > > If it will help any how I am attaching:
> > > > > > > - /proc/cpuinfo (from healthy system):
> > > > > > > https://gist.github.com/semihalf-majczak-lukasz/3517867bf39f07377c1a785b64a97066
> > > > > > > - my .config file (for a broken system):
> > > > > > > https://gist.github.com/semihalf-majczak-lukasz/584b329f1bf3e43b53efe8e18b5da33c
> > > > > > >
> > > > > > > If there is anything I could add/do/test to help fix this please let me know.
> > > > > >
> > > > > > Chris Wilson also reported boot failures on several Chromebooks:
> > > > > >
> > > > > > https://lore.kernel.org/lkml/161160687463.28991.354987542182281928@build.alporthouse.com
> > > > > >
> > > > > > I presume serial console is not an option, so if you could boot with
> > > > > > earlyprintk=vga and see if there is anything useful printed on the screen
> > > > > > it would be really helpful.
> > > > > >
> > > > > > > Best regards
> > > > > > > Lukasz
> > > > > >
> > > > > > --
> > > > > > Sincerely yours,
> > > > > > Mike.
> > > >
> > > > --
> > > > Sincerely yours,
> > > > Mike.
>
> --
> Sincerely yours,
> Mike.
>
Powered by blists - more mailing lists