| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210128152744.12439-2-a-govindraju@ti.com>
Date: Thu, 28 Jan 2021 20:57:42 +0530
From: Aswath Govindraju <a-govindraju@...com>
To: unlisted-recipients:; (no To-header on input)
CC: Lokesh Vutla <lokeshvutla@...com>,
Vignesh Raghavendra <vigneshr@...com>,
Kishon Vijay Abraham I <kishon@...com>,
Sekhar Nori <nsekhar@...com>, Faiz Abbas <faiz_abbas@...com>,
Aswath Govindraju <a-govindraju@...com>,
Nishanth Menon <nm@...com>, Tero Kristo <kristo@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v4 1/3] arm64: dts: ti: k3-j7200: Add gpio nodes
From: Faiz Abbas <faiz_abbas@...com>
There are 4 instances of gpio modules in main domain:
gpio0, gpio2, gpio4 and gpio6
Groups are created to provide protection between different processor
virtual worlds. Each of these modules I/O pins are muxed within the
group. Exactly one module can be selected to control the corresponding
pin by selecting it in the pad mux configuration registers.
This group pins out 69 lines (5 banks). Add DT modes for each module
instance in the main domain.
Similar to the gpio groups in main domain, there is one gpio group in
wakeup domain with 2 mdoules instances in it.
The gpio group pins out 73 pins (5 banks). Add DT nodes for each module
instance in the wakeup domain.
Signed-off-by: Faiz Abbas <faiz_abbas@...com>
Signed-off-by: Sekhar Nori <nsekhar@...com>
Signed-off-by: Aswath Govindraju <a-govindraju@...com>
---
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 72 +++++++++++++++++++
.../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 34 +++++++++
2 files changed, 106 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index d623004cfc9e..7a04a113f445 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -675,6 +675,78 @@
};
};
+ main_gpio0: gpio@...000 {
+ compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+ reg = <0x00 0x00600000 0x00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&main_gpio_intr>;
+ interrupts = <145>, <146>, <147>, <148>,
+ <149>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ ti,ngpio = <69>;
+ ti,davinci-gpio-unbanked = <0>;
+ power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 105 0>;
+ clock-names = "gpio";
+ };
+
+ main_gpio2: gpio@...000 {
+ compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+ reg = <0x00 0x00610000 0x00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&main_gpio_intr>;
+ interrupts = <154>, <155>, <156>, <157>,
+ <158>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ ti,ngpio = <69>;
+ ti,davinci-gpio-unbanked = <0>;
+ power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 107 0>;
+ clock-names = "gpio";
+ };
+
+ main_gpio4: gpio@...000 {
+ compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+ reg = <0x00 0x00620000 0x00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&main_gpio_intr>;
+ interrupts = <163>, <164>, <165>, <166>,
+ <167>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ ti,ngpio = <69>;
+ ti,davinci-gpio-unbanked = <0>;
+ power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 109 0>;
+ clock-names = "gpio";
+ };
+
+ main_gpio6: gpio@...000 {
+ compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+ reg = <0x00 0x00630000 0x00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&main_gpio_intr>;
+ interrupts = <172>, <173>, <174>, <175>,
+ <176>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ ti,ngpio = <69>;
+ ti,davinci-gpio-unbanked = <0>;
+ power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 111 0>;
+ clock-names = "gpio";
+ };
+
main_r5fss0: r5fss@...0000 {
compatible = "ti,j7200-r5fss";
ti,cluster-mode = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 0a8df7e4739c..3376bd57fd2d 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -108,6 +108,40 @@
ti,interrupt-ranges = <16 960 16>;
};
+ wkup_gpio0: gpio@...10000 {
+ compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+ reg = <0x00 0x42110000 0x00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&wkup_gpio_intr>;
+ interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ ti,ngpio = <73>;
+ ti,davinci-gpio-unbanked = <0>;
+ power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 113 0>;
+ clock-names = "gpio";
+ };
+
+ wkup_gpio1: gpio@...00000 {
+ compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+ reg = <0x00 0x42100000 0x00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&wkup_gpio_intr>;
+ interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ ti,ngpio = <73>;
+ ti,davinci-gpio-unbanked = <0>;
+ power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 114 0>;
+ clock-names = "gpio";
+ };
+
mcu_navss: bus@...80000 {
compatible = "simple-mfd";
#address-cells = <2>;
--
2.17.1
Powered by blists - more mailing lists