lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Message-Id: <1612025611-92016-1-git-send-email-gakula@marvell.com>
Date:   Sat, 30 Jan 2021 22:23:31 +0530
From:   Geetha sowjanya <gakula@...vell.com>
To:     netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     sgoutham@...vell.com, davem@...emloft.net, kuba@...nel.org,
        Geetha sowjanya <gakula@...vell.com>
Subject: [net-next 06/14] octeontx2-pf: cn10k: Map LMTST region

On CN10K platform transmit/receive buffer alloc and free from/to hardware
had changed to support burst operation. Whereas pervious silicon's only
support single buffer free at a time.
To Support the same firmware allocates a DRAM region for each PF/VF for
storing LMTLINES. These LMTLINES are used for NPA batch free and for
flushing SQE to the hardware.
PF/VF LMTST region is accessed via BAR4. PFs LMTST region is followed
by its VFs mbox memory. The size of region varies from 2KB to 256KB based
on number of LMTLINES configured.

This patch adds support for
- Mapping PF/VF LMTST region.
- Reserves 0-71 (RX + TX + XDP) LMTST lines for NPA batch
  free operation.
- Reserves 72-512 LMTST lines for NIX SQE flush.

Signed-off-by: Geetha sowjanya <gakula@...vell.com>
Signed-off-by: Sunil Goutham <sgoutham@...vell.com>
---
 .../ethernet/marvell/octeontx2/nic/otx2_common.h   | 15 ++++++-
 .../net/ethernet/marvell/octeontx2/nic/otx2_pf.c   | 52 +++++++++++++++++++++-
 .../net/ethernet/marvell/octeontx2/nic/otx2_vf.c   | 37 ++++++++++++++-
 3 files changed, 100 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
index e05a5d5..80f892f 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
@@ -207,7 +207,14 @@ struct otx2_hw {
 	u8			lbk_links;  /* No. of LBK links present in HW */
 #define HW_TSO			BIT_ULL(0)
 #define CN10K_MBOX		BIT_ULL(1)
+#define CN10K_LMTST		BIT_ULL(2)
 	unsigned long		cap_flag;
+
+#define LMT_LINE_SIZE		128
+#define NIX_LMTID_BASE		72 /* RX + TX + XDP */
+	void __iomem		*lmt_base;
+	u64			*npa_lmt_base;
+	u64			*nix_lmt_base;
 };
 
 struct otx2_vf_config {
@@ -317,6 +324,10 @@ struct otx2_nic {
 
 	/* Block address of NIX either BLKADDR_NIX0 or BLKADDR_NIX1 */
 	int			nix_blkaddr;
+	/* LMTST Lines info */
+	u16			tot_lmt_lines;
+	u16			nix_lmt_lines;
+	u32			nix_lmt_size;
 
 	struct otx2_ptp		*ptp;
 	struct hwtstamp_config	tstamp;
@@ -382,8 +393,10 @@ static inline void otx2_setup_dev_hw_settings(struct otx2_nic *pfvf)
 		pfvf->hw.rq_skid = 600;
 		pfvf->qset.rqe_cnt = Q_COUNT(Q_SIZE_1K);
 	}
-	if (!is_dev_otx2(pfvf->pdev))
+	if (!is_dev_otx2(pfvf->pdev)) {
 		__set_bit(CN10K_MBOX, &hw->cap_flag);
+		__set_bit(CN10K_LMTST, &hw->cap_flag);
+	}
 }
 
 /* Register read/write APIs */
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
index 011a56d..4097559 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -46,6 +46,39 @@ enum {
 static int otx2_config_hw_tx_tstamp(struct otx2_nic *pfvf, bool enable);
 static int otx2_config_hw_rx_tstamp(struct otx2_nic *pfvf, bool enable);
 
+static int cn10k_lmtst_init(struct otx2_nic *pf)
+{
+	int size, num_lines;
+	u64 base;
+
+	if (!test_bit(CN10K_LMTST, &pf->hw.cap_flag))
+		return 0;
+
+	base = pci_resource_start(pf->pdev, PCI_MBOX_BAR_NUM) +
+		       (MBOX_SIZE * (pf->total_vfs + 1));
+
+	size = pci_resource_len(pf->pdev, PCI_MBOX_BAR_NUM) -
+	       (MBOX_SIZE * (pf->total_vfs + 1));
+
+	pf->hw.lmt_base = ioremap(base, size);
+
+	if (!pf->hw.lmt_base) {
+		dev_err(pf->dev, "Unable to map PF LMTST region\n");
+		return -ENOMEM;
+	}
+
+	/* FIXME: Get the num of LMTST lines from LMT table */
+	pf->tot_lmt_lines = size / LMT_LINE_SIZE;
+	num_lines = (pf->tot_lmt_lines - NIX_LMTID_BASE) /
+			    pf->hw.tx_queues;
+	/* Number of LMT lines per SQ queues */
+	pf->nix_lmt_lines = num_lines > 32 ? 32 : num_lines;
+
+	pf->nix_lmt_size = pf->nix_lmt_lines * LMT_LINE_SIZE;
+
+	return 0;
+}
+
 static int otx2_change_mtu(struct net_device *netdev, int new_mtu)
 {
 	bool if_up = netif_running(netdev);
@@ -1495,6 +1528,14 @@ int otx2_open(struct net_device *netdev)
 	if (!qset->rq)
 		goto err_free_mem;
 
+	if (test_bit(CN10K_LMTST, &pf->hw.cap_flag)) {
+		/* Reserve LMT lines for NPA AURA batch free */
+		pf->hw.npa_lmt_base = (__force u64 *)pf->hw.lmt_base;
+		/* Reserve LMT lines for NIX TX */
+		pf->hw.nix_lmt_base = (__force u64 *)((u64)pf->hw.npa_lmt_base +
+				      (NIX_LMTID_BASE * LMT_LINE_SIZE));
+	}
+
 	err = otx2_init_hw_resources(pf);
 	if (err)
 		goto err_free_mem;
@@ -2333,6 +2374,8 @@ static int otx2_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto err_free_netdev;
 	}
 
+	otx2_setup_dev_hw_settings(pf);
+
 	/* Init PF <=> AF mailbox stuff */
 	err = otx2_pfaf_mbox_init(pf);
 	if (err)
@@ -2358,7 +2401,9 @@ static int otx2_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (err)
 		goto err_detach_rsrc;
 
-	otx2_setup_dev_hw_settings(pf);
+	err = cn10k_lmtst_init(pf);
+	if (err)
+		goto err_detach_rsrc;
 
 	/* Assign default mac address */
 	otx2_get_mac_from_af(netdev);
@@ -2443,6 +2488,8 @@ static int otx2_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 err_ptp_destroy:
 	otx2_ptp_destroy(pf);
 err_detach_rsrc:
+	if (hw->lmt_base)
+		iounmap(hw->lmt_base);
 	otx2_detach_resources(&pf->mbox);
 err_disable_mbox_intr:
 	otx2_disable_mbox_intr(pf);
@@ -2602,6 +2649,9 @@ static void otx2_remove(struct pci_dev *pdev)
 	otx2_ptp_destroy(pf);
 	otx2_mcam_flow_del(pf);
 	otx2_detach_resources(&pf->mbox);
+	if (pf->hw.lmt_base)
+		iounmap(pf->hw.lmt_base);
+
 	otx2_disable_mbox_intr(pf);
 	otx2_pfaf_mbox_destroy(pf);
 	pci_free_irq_vectors(pf->pdev);
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
index 6a2dde2..0ab7cf8 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
@@ -27,6 +27,31 @@ enum {
 	RVU_VF_INT_VEC_MBOX = 0x0,
 };
 
+static int cn10k_lmtst_init(struct otx2_nic *vf)
+{
+	int size, num_lines;
+
+	if (!test_bit(CN10K_LMTST, &vf->hw.cap_flag))
+		return 0;
+
+	size = pci_resource_len(vf->pdev, PCI_MBOX_BAR_NUM);
+	vf->hw.lmt_base = ioremap_wc(pci_resource_start(vf->pdev,
+							PCI_MBOX_BAR_NUM),
+				     size);
+	if (!vf->hw.lmt_base) {
+		dev_err(vf->dev, "Unable to map VF LMTST region\n");
+		return -ENOMEM;
+	}
+
+	vf->tot_lmt_lines = size / LMT_LINE_SIZE;
+	/* LMTST lines per SQ */
+	num_lines = (vf->tot_lmt_lines - NIX_LMTID_BASE) /
+			    vf->hw.tx_queues;
+	vf->nix_lmt_lines = num_lines > 32 ? 32 : num_lines;
+	vf->nix_lmt_size = vf->nix_lmt_lines * LMT_LINE_SIZE;
+	return 0;
+}
+
 static void otx2vf_process_vfaf_mbox_msg(struct otx2_nic *vf,
 					 struct mbox_msghdr *msg)
 {
@@ -536,6 +561,7 @@ static int otx2vf_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto err_free_irq_vectors;
 	}
 
+	otx2_setup_dev_hw_settings(vf);
 	/* Init VF <=> PF mailbox stuff */
 	err = otx2vf_vfaf_mbox_init(vf);
 	if (err)
@@ -559,7 +585,9 @@ static int otx2vf_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (err)
 		goto err_detach_rsrc;
 
-	otx2_setup_dev_hw_settings(vf);
+	err = cn10k_lmtst_init(vf);
+	if (err)
+		goto err_detach_rsrc;
 
 	/* Assign default mac address */
 	otx2_get_mac_from_af(netdev);
@@ -611,6 +639,8 @@ static int otx2vf_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	return 0;
 
 err_detach_rsrc:
+	if (hw->lmt_base)
+		iounmap(hw->lmt_base);
 	otx2_detach_resources(&vf->mbox);
 err_disable_mbox_intr:
 	otx2vf_disable_mbox_intr(vf);
@@ -639,8 +669,11 @@ static void otx2vf_remove(struct pci_dev *pdev)
 	cancel_work_sync(&vf->reset_task);
 	unregister_netdev(netdev);
 	otx2vf_disable_mbox_intr(vf);
-
 	otx2_detach_resources(&vf->mbox);
+
+	if (vf->hw.lmt_base)
+		iounmap(vf->hw.lmt_base);
+
 	otx2vf_vfaf_mbox_destroy(vf);
 	pci_free_irq_vectors(vf->pdev);
 	pci_set_drvdata(pdev, NULL);
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ