[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <80b768e1-9e46-88d7-a56b-c90a46bd3a10@gmail.com>
Date: Sun, 31 Jan 2021 11:24:03 +0100
From: Matthias Brugger <matthias.bgg@...il.com>
To: Fabien Parent <fparent@...libre.com>,
Rob Herring <robh+dt@...nel.org>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 2/2] arm64: dts: mediatek: mt8516: add support for
APDMA
On 09/12/2020 12:47, Fabien Parent wrote:
> Add support the APDMA IP on MT8516. APDMA is a DMA controller
> for UARTs.
>
> Signed-off-by: Fabien Parent <fparent@...libre.com>
> ---
>
Applied to v5.11-next/dts64
Thanks a lot!
> V3: remove unicode symbol that slips into patch summary
> V2: Add missing dma-names properties on uart nodes
>
> arch/arm64/boot/dts/mediatek/mt8516.dtsi | 30 ++++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
> index e6e4d9d60094..b80e95574bef 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
> @@ -276,6 +276,27 @@ gic: interrupt-controller@...10000 {
> (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> };
>
> + apdma: dma-controller@...00480 {
> + compatible = "mediatek,mt8516-uart-dma",
> + "mediatek,mt6577-uart-dma";
> + reg = <0 0x11000480 0 0x80>,
> + <0 0x11000500 0 0x80>,
> + <0 0x11000580 0 0x80>,
> + <0 0x11000600 0 0x80>,
> + <0 0x11000980 0 0x80>,
> + <0 0x11000a00 0 0x80>;
> + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 99 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 100 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 101 IRQ_TYPE_LEVEL_LOW>;
> + dma-requests = <6>;
> + clocks = <&topckgen CLK_TOP_APDMA>;
> + clock-names = "apdma";
> + #dma-cells = <1>;
> + };
> +
> uart0: serial@...05000 {
> compatible = "mediatek,mt8516-uart",
> "mediatek,mt6577-uart";
> @@ -284,6 +305,9 @@ uart0: serial@...05000 {
> clocks = <&topckgen CLK_TOP_UART0_SEL>,
> <&topckgen CLK_TOP_UART0>;
> clock-names = "baud", "bus";
> + dmas = <&apdma 0
> + &apdma 1>;
> + dma-names = "tx", "rx";
> status = "disabled";
> };
>
> @@ -295,6 +319,9 @@ uart1: serial@...06000 {
> clocks = <&topckgen CLK_TOP_UART1_SEL>,
> <&topckgen CLK_TOP_UART1>;
> clock-names = "baud", "bus";
> + dmas = <&apdma 2
> + &apdma 3>;
> + dma-names = "tx", "rx";
> status = "disabled";
> };
>
> @@ -306,6 +333,9 @@ uart2: serial@...07000 {
> clocks = <&topckgen CLK_TOP_UART2_SEL>,
> <&topckgen CLK_TOP_UART2>;
> clock-names = "baud", "bus";
> + dmas = <&apdma 4
> + &apdma 5>;
> + dma-names = "tx", "rx";
> status = "disabled";
> };
>
>
Powered by blists - more mailing lists