| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4524334.CTQdp8m5YU@kreacher>
Date: Mon, 01 Feb 2021 19:18:14 +0100
From: "Rafael J. Wysocki" <rjw@...ysocki.net>
To: Linux ACPI <linux-acpi@...r.kernel.org>
Cc: Linux PM <linux-pm@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Zhang Rui <rui.zhang@...el.com>,
Hans de Goede <hdegoede@...hat.com>,
Erik Kaneda <erik.kaneda@...el.com>,
Joe Perches <joe@...ches.com>
Subject: [PATCH v1 4/5] ACPI: video: Clean up printing messages
From: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
Replace the ACPI_DEBUG_PRINT() instances in acpi_video.c with
acpi_handle_debug() calls and the ACPI_EXCEPTION()/ACPI_ERROR()/
ACPI_WARNING() instances in there with acpi_handle_info() calls.
Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
used any more from acpi_video.c, drop the no longer needed
ACPI_VIDEO_COMPONENT definition from the headers and update the
documentation accordingly.
While at it, add a pr_fmt() definition to acpi_video.c, replace the
direct printk() invocations in there with acpi_handle_info() or
pr_info() (and reduce the excessive log level where applicable) and
drop the PREFIX sybmbol definition which is not necessary any more
from acpi_video.c.
Also make one unrelated janitorial change to fix up white space and
use ACPI_FAILURE() instead of negating ACPI_SUCCESS().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
---
Documentation/firmware-guide/acpi/debug.rst | 1
drivers/acpi/acpi_video.c | 95 ++++++++++++++--------------
drivers/acpi/sysfs.c | 1
include/acpi/acpi_drivers.h | 1
4 files changed, 49 insertions(+), 49 deletions(-)
Index: linux-pm/drivers/acpi/acpi_video.c
===================================================================
--- linux-pm.orig/drivers/acpi/acpi_video.c
+++ linux-pm/drivers/acpi/acpi_video.c
@@ -7,6 +7,8 @@
* Copyright (C) 2006 Thomas Tuttle <linux-kernel@...ttle.net>
*/
+#define pr_fmt(fmt) "ACPI: video: " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -26,16 +28,11 @@
#include <acpi/video.h>
#include <linux/uaccess.h>
-#define PREFIX "ACPI: "
-
#define ACPI_VIDEO_BUS_NAME "Video Bus"
#define ACPI_VIDEO_DEVICE_NAME "Video Device"
#define MAX_NAME_LEN 20
-#define _COMPONENT ACPI_VIDEO_COMPONENT
-ACPI_MODULE_NAME("video");
-
MODULE_AUTHOR("Bruno Ducrot");
MODULE_DESCRIPTION("ACPI Video Driver");
MODULE_LICENSE("GPL");
@@ -330,7 +327,7 @@ acpi_video_device_lcd_query_levels(acpi_
return status;
obj = (union acpi_object *)buffer.pointer;
if (!obj || (obj->type != ACPI_TYPE_PACKAGE)) {
- printk(KERN_ERR PREFIX "Invalid _BCL data\n");
+ acpi_handle_info(handle, "Invalid _BCL data\n");
status = -EFAULT;
goto err;
}
@@ -354,7 +351,7 @@ acpi_video_device_lcd_set_level(struct a
status = acpi_execute_simple_method(device->dev->handle,
"_BCM", level);
if (ACPI_FAILURE(status)) {
- ACPI_ERROR((AE_INFO, "Evaluating _BCM failed"));
+ acpi_handle_info(device->dev->handle, "_BCM evaluation failed\n");
return -EIO;
}
@@ -368,7 +365,7 @@ acpi_video_device_lcd_set_level(struct a
return 0;
}
- ACPI_ERROR((AE_INFO, "Current brightness invalid"));
+ acpi_handle_info(device->dev->handle, "Current brightness invalid\n");
return -EINVAL;
}
@@ -622,9 +619,8 @@ acpi_video_device_lcd_get_level_current(
* BQC returned an invalid level.
* Stop using it.
*/
- ACPI_WARNING((AE_INFO,
- "%s returned an invalid level",
- buf));
+ acpi_handle_info(device->dev->handle,
+ "%s returned an invalid level", buf);
device->cap._BQC = device->cap._BCQ = 0;
} else {
/*
@@ -635,7 +631,8 @@ acpi_video_device_lcd_get_level_current(
* ACPI video backlight still works w/ buggy _BQC.
* http://bugzilla.kernel.org/show_bug.cgi?id=12233
*/
- ACPI_WARNING((AE_INFO, "Evaluating %s failed", buf));
+ acpi_handle_info(device->dev->handle,
+ "%s evaluation failed", buf);
device->cap._BQC = device->cap._BCQ = 0;
}
}
@@ -675,7 +672,7 @@ acpi_video_device_EDID(struct acpi_video
if (obj && obj->type == ACPI_TYPE_BUFFER)
*edid = obj;
else {
- printk(KERN_ERR PREFIX "Invalid _DDC data\n");
+ acpi_handle_info(device->dev->handle, "Invalid _DDC data\n");
status = -EFAULT;
kfree(obj);
}
@@ -827,10 +824,9 @@ int acpi_video_get_levels(struct acpi_de
int result = 0;
u32 value;
- if (!ACPI_SUCCESS(acpi_video_device_lcd_query_levels(device->handle,
- &obj))) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Could not query available "
- "LCD brightness level\n"));
+ if (ACPI_FAILURE(acpi_video_device_lcd_query_levels(device->handle, &obj))) {
+ acpi_handle_debug(device->handle,
+ "Could not query available LCD brightness level\n");
result = -ENODEV;
goto out;
}
@@ -842,7 +838,6 @@ int acpi_video_get_levels(struct acpi_de
br = kzalloc(sizeof(*br), GFP_KERNEL);
if (!br) {
- printk(KERN_ERR "can't allocate memory\n");
result = -ENOMEM;
goto out;
}
@@ -863,7 +858,7 @@ int acpi_video_get_levels(struct acpi_de
for (i = 0; i < obj->package.count; i++) {
o = (union acpi_object *)&obj->package.elements[i];
if (o->type != ACPI_TYPE_INTEGER) {
- printk(KERN_ERR PREFIX "Invalid data\n");
+ acpi_handle_info(device->handle, "Invalid data\n");
continue;
}
value = (u32) o->integer.value;
@@ -900,7 +895,8 @@ int acpi_video_get_levels(struct acpi_de
br->levels[i] = br->levels[i - level_ac_battery];
count += level_ac_battery;
} else if (level_ac_battery > ACPI_VIDEO_FIRST_LEVEL)
- ACPI_ERROR((AE_INFO, "Too many duplicates in _BCL package"));
+ acpi_handle_info(device->handle,
+ "Too many duplicates in _BCL package");
/* Check if the _BCL package is in a reversed order */
if (max_level == br->levels[ACPI_VIDEO_FIRST_LEVEL]) {
@@ -910,8 +906,8 @@ int acpi_video_get_levels(struct acpi_de
sizeof(br->levels[ACPI_VIDEO_FIRST_LEVEL]),
acpi_video_cmp_level, NULL);
} else if (max_level != br->levels[count - 1])
- ACPI_ERROR((AE_INFO,
- "Found unordered _BCL package"));
+ acpi_handle_info(device->handle,
+ "Found unordered _BCL package");
br->count = count;
*dev_br = br;
@@ -989,9 +985,9 @@ set_level:
if (result)
goto out_free_levels;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "found %d brightness levels\n",
- br->count - ACPI_VIDEO_FIRST_LEVEL));
+ acpi_handle_debug(device->dev->handle, "found %d brightness levels\n",
+ br->count - ACPI_VIDEO_FIRST_LEVEL);
+
return 0;
out_free_levels:
@@ -1023,7 +1019,8 @@ static void acpi_video_device_find_cap(s
if (acpi_has_method(device->dev->handle, "_BQC")) {
device->cap._BQC = 1;
} else if (acpi_has_method(device->dev->handle, "_BCQ")) {
- printk(KERN_WARNING FW_BUG "_BCQ is used instead of _BQC\n");
+ acpi_handle_info(device->dev->handle,
+ "_BCQ is used instead of _BQC\n");
device->cap._BCQ = 1;
}
@@ -1083,8 +1080,7 @@ static int acpi_video_bus_check(struct a
/* Does this device support video switching? */
if (video->cap._DOS || video->cap._DOD) {
if (!video->cap._DOS) {
- printk(KERN_WARNING FW_BUG
- "ACPI(%s) defines _DOD but not _DOS\n",
+ pr_info(FW_BUG "ACPI(%s) defines _DOD but not _DOS\n",
acpi_device_bid(video->device));
}
video->flags.multihead = 1;
@@ -1272,7 +1268,8 @@ acpi_video_device_bind(struct acpi_video
ids = &video->attached_array[i];
if (device->device_id == (ids->value.int_val & 0xffff)) {
ids->bind_info = device;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "device_bind %d\n", i));
+ acpi_handle_debug(video->device->handle, "%s: %d\n",
+ __func__, i);
}
}
}
@@ -1325,19 +1322,21 @@ static int acpi_video_device_enumerate(s
status = acpi_evaluate_object(video->device->handle, "_DOD", NULL, &buffer);
if (!ACPI_SUCCESS(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Evaluating _DOD"));
+ acpi_handle_info(video->device->handle,
+ "_DOD evaluation failed: %s\n",
+ acpi_format_exception(status));
return status;
}
dod = buffer.pointer;
if (!dod || (dod->type != ACPI_TYPE_PACKAGE)) {
- ACPI_EXCEPTION((AE_INFO, status, "Invalid _DOD data"));
+ acpi_handle_info(video->device->handle, "Invalid _DOD data\n");
status = -EFAULT;
goto out;
}
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d video heads in _DOD\n",
- dod->package.count));
+ acpi_handle_debug(video->device->handle, "Found %d video heads in _DOD\n",
+ dod->package.count);
active_list = kcalloc(1 + dod->package.count,
sizeof(struct acpi_video_enumerated_device),
@@ -1352,15 +1351,18 @@ static int acpi_video_device_enumerate(s
obj = &dod->package.elements[i];
if (obj->type != ACPI_TYPE_INTEGER) {
- printk(KERN_ERR PREFIX
- "Invalid _DOD data in element %d\n", i);
+ acpi_handle_info(video->device->handle,
+ "Invalid _DOD data in element %d\n", i);
continue;
}
active_list[count].value.int_val = obj->integer.value;
active_list[count].bind_info = NULL;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "dod element[%d] = %d\n", i,
- (int)obj->integer.value));
+
+ acpi_handle_debug(video->device->handle,
+ "_DOD element[%d] = %d\n", i,
+ (int)obj->integer.value);
+
count++;
}
@@ -1451,7 +1453,8 @@ acpi_video_switch_brightness(struct work
out:
if (result)
- printk(KERN_ERR PREFIX "Failed to switch the brightness\n");
+ acpi_handle_info(device->dev->handle,
+ "Failed to switch brightness\n");
}
int acpi_video_get_edid(struct acpi_device *device, int type, int device_id,
@@ -1601,8 +1604,8 @@ static void acpi_video_bus_notify(struct
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Unsupported event [0x%x]\n", event));
+ acpi_handle_debug(device->handle, "Unsupported event [0x%x]\n",
+ event);
break;
}
@@ -1675,8 +1678,7 @@ static void acpi_video_device_notify(acp
keycode = KEY_DISPLAY_OFF;
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Unsupported event [0x%x]\n", event));
+ acpi_handle_debug(handle, "Unsupported event [0x%x]\n", event);
break;
}
@@ -1812,11 +1814,12 @@ static void acpi_video_dev_register_back
&device->cooling_dev->device.kobj,
"thermal_cooling");
if (result)
- printk(KERN_ERR PREFIX "Create sysfs link\n");
+ pr_info("sysfs link creation failed\n");
+
result = sysfs_create_link(&device->cooling_dev->device.kobj,
&device->dev->dev.kobj, "device");
if (result)
- printk(KERN_ERR PREFIX "Create sysfs link\n");
+ pr_info("Reverse sysfs link creation failed\n");
}
static void acpi_video_run_bcl_for_osi(struct acpi_video_bus *video)
@@ -2030,7 +2033,7 @@ static int acpi_video_bus_add(struct acp
acpi_video_bus_match, NULL,
device, NULL);
if (status == AE_ALREADY_EXISTS) {
- printk(KERN_WARNING FW_BUG
+ pr_info(FW_BUG
"Duplicate ACPI video bus devices for the"
" same VGA controller, please try module "
"parameter \"video.allow_duplicates=1\""
@@ -2073,7 +2076,7 @@ static int acpi_video_bus_add(struct acp
if (error)
goto err_put_video;
- printk(KERN_INFO PREFIX "%s [%s] (multi-head: %s rom: %s post: %s)\n",
+ pr_info("%s [%s] (multi-head: %s rom: %s post: %s)\n",
ACPI_VIDEO_DEVICE_NAME, acpi_device_bid(device),
video->flags.multihead ? "yes" : "no",
video->flags.rom ? "yes" : "no",
Index: linux-pm/Documentation/firmware-guide/acpi/debug.rst
===================================================================
--- linux-pm.orig/Documentation/firmware-guide/acpi/debug.rst
+++ linux-pm/Documentation/firmware-guide/acpi/debug.rst
@@ -59,7 +59,6 @@ shows the supported mask values, current
ACPI_SYSTEM_COMPONENT 0x02000000
ACPI_THERMAL_COMPONENT 0x04000000
ACPI_MEMORY_DEVICE_COMPONENT 0x08000000
- ACPI_VIDEO_COMPONENT 0x10000000
ACPI_PROCESSOR_COMPONENT 0x20000000
debug_level
Index: linux-pm/drivers/acpi/sysfs.c
===================================================================
--- linux-pm.orig/drivers/acpi/sysfs.c
+++ linux-pm/drivers/acpi/sysfs.c
@@ -59,7 +59,6 @@ static const struct acpi_dlayer acpi_deb
ACPI_DEBUG_INIT(ACPI_SYSTEM_COMPONENT),
ACPI_DEBUG_INIT(ACPI_THERMAL_COMPONENT),
ACPI_DEBUG_INIT(ACPI_MEMORY_DEVICE_COMPONENT),
- ACPI_DEBUG_INIT(ACPI_VIDEO_COMPONENT),
ACPI_DEBUG_INIT(ACPI_PROCESSOR_COMPONENT),
};
Index: linux-pm/include/acpi/acpi_drivers.h
===================================================================
--- linux-pm.orig/include/acpi/acpi_drivers.h
+++ linux-pm/include/acpi/acpi_drivers.h
@@ -22,7 +22,6 @@
#define ACPI_SYSTEM_COMPONENT 0x02000000
#define ACPI_THERMAL_COMPONENT 0x04000000
#define ACPI_MEMORY_DEVICE_COMPONENT 0x08000000
-#define ACPI_VIDEO_COMPONENT 0x10000000
#define ACPI_PROCESSOR_COMPONENT 0x20000000
/*
Powered by blists - more mailing lists