[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210201191619.32353-4-jbx6244@gmail.com>
Date: Mon, 1 Feb 2021 20:16:18 +0100
From: Johan Jonker <jbx6244@...il.com>
To: heiko@...ech.de
Cc: robh+dt@...nel.org, gregkh@...uxfoundation.org, balbi@...nel.org,
linux-usb@...r.kernel.org, linux-rockchip@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v1 4/5] arm64: dts: rockchip: add rk3328 dwc3 usb controller node
From: Cameron Nemo <cnemo@...anota.com>
RK3328 SoCs have one USB 3.0 OTG controller which uses DWC_USB3
core's general architecture. It can act as static xHCI host
controller, static device controller, USB 3.0/2.0 OTG basing
on ID of USB3.0 PHY.
Signed-off-by: William Wu <william.wu@...k-chips.com>
Signed-off-by: Heiko Stuebner <heiko@...ech.de>
Signed-off-by: Cameron Nemo <cnemo@...anota.com>
Signed-off-by: Johan Jonker <jbx6244@...il.com>
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 17709faf6..2bb666d35 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -987,6 +987,33 @@
status = "disabled";
};
+ usbdrd3: usb@...00000 {
+ compatible = "rockchip,rk3328-dwc3";
+ clocks = <&cru SCLK_USB3OTG_REF>, <&cru SCLK_USB3OTG_SUSPEND>,
+ <&cru ACLK_USB3OTG>;
+ clock-names = "ref_clk", "suspend_clk",
+ "bus_clk";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ usbdrd_dwc3: usb@...00000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xff600000 0x0 0x100000>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "otg";
+ phy_type = "utmi_wide";
+ snps,dis_enblslpm_quirk;
+ snps,dis-u2-freeclk-exists-quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ snps,dis-del-phy-power-chg-quirk;
+ snps,dis-tx-ipgap-linecheck-quirk;
+ status = "disabled";
+ };
+ };
+
gic: interrupt-controller@...11000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
--
2.11.0
Powered by blists - more mailing lists