linux-kernel - Re: Re: [PATCH v4] ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210201120803.GF15207@lemon.iwr.uni-heidelberg.de>
Date:   Mon, 1 Feb 2021 13:08:03 +0100
From:   Hermann Lauer <Hermann.Lauer@....uni-heidelberg.de>
To:     Maxime Ripard <maxime@...no.tech>
Cc:     linux-arm-kernel@...ts.infradead.org, wens@...e.org,
        jernej.skrabec@...l.net, robh+dt@...nel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: Re: [PATCH v4] ARM: dts: sun7i: a20: bananapro: Fix ethernet
 phy-mode

On Thu, Jan 28, 2021 at 03:59:37PM +0100, Maxime Ripard wrote:
> On Thu, Jan 28, 2021 at 12:18:42PM +0100, Hermann.Lauer@...-heidelberg.de wrote:
> > BPi Pro needs TX and RX delay for Gbit to work reliable and avoid high
> > packet loss rates. The realtek phy driver overrides the settings of the
> > pull ups for the delays, so fix this for BananaPro.
> >     
> > Fix the phy-mode description to correctly reflect this so that the
> > implementation doesn't reconfigure the delays incorrectly. This
> > happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
> > rx/tx delay config").
> > 
> > Fixes: 10662a33dcd9 ("ARM: dts: sun7i: Add dts file for Bananapro board")
> > Signed-off-by: Hermann Lauer <Hermann.Lauer@...-heidelberg.de>
> 
> Applied since it's a fix simple enough, but please provide a changelog
> between versions.

v3 added the correct fixes tag, where the problem originated (initial commit
of banana pro device tree). That worked in the past until a change in
the phy device driver for realtek phy on banana pro overrode the
phyical configuration of the hardware pull-ups.

v4 added the commit which implemented that driver change (shamelessly stolen
from the commit of the fix of the identical problem on the banana pi)

Thanks,
 greetings
  Hermann

-- 
Administration/Zentrale Dienste, Interdiziplinaeres 
Zentrum fuer wissenschaftliches Rechnen der Universitaet Heidelberg
IWR; INF 205; 69120 Heidelberg; Tel: (06221)54-14405 Fax: -14427
Email: Hermann.Lauer@....uni-heidelberg.de