lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date:   Sun, 31 Jan 2021 16:33:00 -0800
From:   Guenter Roeck <linux@...ck-us.net>
To:     Lukas Bulwahn <lukas.bulwahn@...il.com>,
        linux-hwmon@...r.kernel.org
Cc:     Jonathan Corbet <corbet@....net>,
        Mauro Carvalho Chehab <mchehab+huawei@...nel.org>,
        linux-doc@...r.kernel.org, kernel-janitors@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH for -next] docs: hwmon: rectify table in max16601.rst

On 1/30/21 11:54 PM, Lukas Bulwahn wrote:
> Commit 90b0f71d62df ("hwmon: (pmbus/max16601) Determine and use number of
> populated phases") adjusts content in the table of
> ./Documentation/hwmon/max16601.rst, but one row went beyond the column's
> length.
> 
> Hence, make htmldocs warns:
> 
>   Documentation/hwmon/max16601.rst:94: WARNING: Malformed table.
> 
> Adjust the column length of that table for this longer row to fit.
> 
> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@...il.com>
> ---
> applies cleanly on next-20210129
> 
> Guenter, please pick this minor fixup for your hwmon-next tree.

I already made the same change and squashed it into the original patch.

Thanks,
Guenter

> 
>  Documentation/hwmon/max16601.rst | 143 +++++++++++++++----------------
>  1 file changed, 71 insertions(+), 72 deletions(-)
> 
> diff --git a/Documentation/hwmon/max16601.rst b/Documentation/hwmon/max16601.rst
> index d16792be7533..d265a2224354 100644
> --- a/Documentation/hwmon/max16601.rst
> +++ b/Documentation/hwmon/max16601.rst
> @@ -53,75 +53,74 @@ Sysfs entries
>  
>  The following attributes are supported.
>  
> -======================= =======================================================
> -in1_label		"vin1"
> -in1_input		VCORE input voltage.
> -in1_alarm		Input voltage alarm.
> -
> -in2_label		"vout1"
> -in2_input		VCORE output voltage.
> -in2_alarm		Output voltage alarm.
> -
> -curr1_label		"iin1"
> -curr1_input		VCORE input current, derived from duty cycle and output
> -			current.
> -curr1_max		Maximum input current.
> -curr1_max_alarm		Current high alarm.
> -
> -curr[P+2]_label		"iin1.P"
> -curr[P+2]_input		VCORE phase P input current.
> -
> -curr[N+2]_label		"iin2"
> -curr[N+2]_input		VCORE input current, derived from sensor element.
> -			'N' is the number of enabled/populated phases.
> -
> -curr[N+3]_label		"iin3"
> -curr[N+3]_input		VSA input current.
> -
> -curr[N+4]_label		"iout1"
> -curr[N+4]_input		VCORE output current.
> -curr[N+4]_crit		Critical output current.
> -curr[N+4]_crit_alarm	Output current critical alarm.
> -curr[N+4]_max		Maximum output current.
> -curr[N+4]_max_alarm	Output current high alarm.
> -
> -curr[N+P+5]_label	"iout1.P"
> -curr[N+P+5]_input	VCORE phase P output current.
> -
> -curr[2*N+5]_label	"iout3"
> -curr[2*N+5]_input	VSA output current.
> -curr[2*N+5]_highest	Historical maximum VSA output current.
> -curr[2*N+5]_reset_history
> -			Write any value to reset curr21_highest.
> -curr[2*N+5]_crit	Critical output current.
> -curr[2*N+5]_crit_alarm	Output current critical alarm.
> -curr[2*N+5]_max		Maximum output current.
> -curr[2*N+5]_max_alarm	Output current high alarm.
> -
> -power1_label		"pin1"
> -power1_input		Input power, derived from duty cycle and output current.
> -power1_alarm		Input power alarm.
> -
> -power2_label		"pin2"
> -power2_input		Input power, derived from input current sensor.
> -
> -power3_label		"pout"
> -power3_input		Output power.
> -
> -temp1_input		VCORE temperature.
> -temp1_crit		Critical high temperature.
> -temp1_crit_alarm	Chip temperature critical high alarm.
> -temp1_max		Maximum temperature.
> -temp1_max_alarm		Chip temperature high alarm.
> -
> -temp2_input		TSENSE_0 temperature
> -temp3_input		TSENSE_1 temperature
> -temp4_input		TSENSE_2 temperature
> -temp5_input		TSENSE_3 temperature
> -
> -temp6_input		VSA temperature.
> -temp6_crit		Critical high temperature.
> -temp6_crit_alarm	Chip temperature critical high alarm.
> -temp6_max		Maximum temperature.
> -temp6_max_alarm		Chip temperature high alarm.
> -======================= =======================================================
> +========================= =======================================================
> +in1_label		  "vin1"
> +in1_input		  VCORE input voltage.
> +in1_alarm		  Input voltage alarm.
> +
> +in2_label		  "vout1"
> +in2_input		  VCORE output voltage.
> +in2_alarm		  Output voltage alarm.
> +
> +curr1_label		  "iin1"
> +curr1_input		  VCORE input current, derived from duty cycle and output
> +			  current.
> +curr1_max		  Maximum input current.
> +curr1_max_alarm		  Current high alarm.
> +
> +curr[P+2]_label		  "iin1.P"
> +curr[P+2]_input		  VCORE phase P input current.
> +
> +curr[N+2]_label		  "iin2"
> +curr[N+2]_input		  VCORE input current, derived from sensor element.
> +			  'N' is the number of enabled/populated phases.
> +
> +curr[N+3]_label		  "iin3"
> +curr[N+3]_input		  VSA input current.
> +
> +curr[N+4]_label		  "iout1"
> +curr[N+4]_input		  VCORE output current.
> +curr[N+4]_crit		  Critical output current.
> +curr[N+4]_crit_alarm	  Output current critical alarm.
> +curr[N+4]_max		  Maximum output current.
> +curr[N+4]_max_alarm	  Output current high alarm.
> +
> +curr[N+P+5]_label	  "iout1.P"
> +curr[N+P+5]_input	  VCORE phase P output current.
> +
> +curr[2*N+5]_label	  "iout3"
> +curr[2*N+5]_input	  VSA output current.
> +curr[2*N+5]_highest	  Historical maximum VSA output current.
> +curr[2*N+5]_reset_history Write any value to reset curr21_highest.
> +curr[2*N+5]_crit	  Critical output current.
> +curr[2*N+5]_crit_alarm	  Output current critical alarm.
> +curr[2*N+5]_max		  Maximum output current.
> +curr[2*N+5]_max_alarm	  Output current high alarm.
> +
> +power1_label		  "pin1"
> +power1_input		  Input power, derived from duty cycle and output current.
> +power1_alarm		  Input power alarm.
> +
> +power2_label		  "pin2"
> +power2_input		  Input power, derived from input current sensor.
> +
> +power3_label		  "pout"
> +power3_input		  Output power.
> +
> +temp1_input		  VCORE temperature.
> +temp1_crit		  Critical high temperature.
> +temp1_crit_alarm	  Chip temperature critical high alarm.
> +temp1_max		  Maximum temperature.
> +temp1_max_alarm		  Chip temperature high alarm.
> +
> +temp2_input		  TSENSE_0 temperature
> +temp3_input		  TSENSE_1 temperature
> +temp4_input		  TSENSE_2 temperature
> +temp5_input		  TSENSE_3 temperature
> +
> +temp6_input		  VSA temperature.
> +temp6_crit		  Critical high temperature.
> +temp6_crit_alarm	  Chip temperature critical high alarm.
> +temp6_max		  Maximum temperature.
> +temp6_max_alarm		  Chip temperature high alarm.
> +========================= =======================================================
> 

Powered by blists - more mailing lists