lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210203151547.13273-1-unixbhaskar@gmail.com>
Date:   Wed,  3 Feb 2021 20:45:47 +0530
From:   Bhaskar Chowdhury <unixbhaskar@...il.com>
To:     linux@...linux.org.uk, davem@...emloft.net, kuba@...nel.org,
        linux-arm-kernel@...ts.infradead.org, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org
Cc:     rdunlap@...radead.org, Bhaskar Chowdhury <unixbhaskar@...il.com>
Subject: [PATCH] drivers: net: ehternet: i825xx:  Fix couple of spellings in the file ether1.c


s/initialsation/initialisation/
s/specifiing/specifying/

Signed-off-by: Bhaskar Chowdhury <unixbhaskar@...il.com>
---
 drivers/net/ethernet/i825xx/ether1.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/i825xx/ether1.c b/drivers/net/ethernet/i825xx/ether1.c
index a0bfb509e002..0233fb6e222d 100644
--- a/drivers/net/ethernet/i825xx/ether1.c
+++ b/drivers/net/ethernet/i825xx/ether1.c
@@ -20,7 +20,7 @@
  * 1.02	RMK	25/05/1997	Added code to restart RU if it goes not ready
  * 1.03	RMK	14/09/1997	Cleaned up the handling of a reset during the TX interrupt.
  *				Should prevent lockup.
- * 1.04 RMK	17/09/1997	Added more info when initialsation of chip goes wrong.
+ * 1.04 RMK	17/09/1997	Added more info when initialisation of chip goes wrong.
  *				TDR now only reports failure when chip reports non-zero
  *				TDR time-distance.
  * 1.05	RMK	31/12/1997	Removed calls to dev_tint for 2.1
@@ -117,7 +117,7 @@ ether1_outw_p (struct net_device *dev, unsigned short val, int addr, int svflgs)
  * Some inline assembler to allow fast transfers on to/off of the card.
  * Since this driver depends on some features presented by the ARM
  * specific architecture, and that you can't configure this driver
- * without specifiing ARM mode, this is not a problem.
+ * without specifying ARM mode, this is not a problem.
  *
  * This routine is essentially an optimised memcpy from the card's
  * onboard RAM to kernel memory.
@@ -885,7 +885,7 @@ ether1_recv_done (struct net_device *dev)
 		ether1_writew(dev, 0, priv(dev)->rx_tail, rfd_t, rfd_command, NORMALIRQS);
 		ether1_writew(dev, 0, priv(dev)->rx_tail, rfd_t, rfd_status, NORMALIRQS);
 		ether1_writew(dev, 0, priv(dev)->rx_tail, rfd_t, rfd_rbdoffset, NORMALIRQS);
-
+
 		priv(dev)->rx_tail = nexttail;
 		priv(dev)->rx_head = ether1_readw(dev, priv(dev)->rx_head, rfd_t, rfd_link, NORMALIRQS);
 	} while (1);
@@ -1031,7 +1031,7 @@ ether1_probe(struct expansion_card *ec, const struct ecard_id *id)

 	printk(KERN_INFO "%s: ether1 in slot %d, %pM\n",
 		dev->name, ec->slot_no, dev->dev_addr);
-
+
 	ecard_set_drvdata(ec, dev);
 	return 0;

@@ -1047,7 +1047,7 @@ static void ether1_remove(struct expansion_card *ec)
 {
 	struct net_device *dev = ecard_get_drvdata(ec);

-	ecard_set_drvdata(ec, NULL);
+	ecard_set_drvdata(ec, NULL);

 	unregister_netdev(dev);
 	free_netdev(dev);
--
2.26.2

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ