| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 4 Feb 2021 15:37:04 +0000
From: Hariprasad Kelam <hkelam@...vell.com>
To: Jakub Kicinski <kuba@...nel.org>
CC: "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"davem@...emloft.net" <davem@...emloft.net>,
"willemdebruijn.kernel@...il.com" <willemdebruijn.kernel@...il.com>,
"andrew@...n.ch" <andrew@...n.ch>,
Sunil Kovvuri Goutham <sgoutham@...vell.com>,
Linu Cherian <lcherian@...vell.com>,
"Geethasowjanya Akula" <gakula@...vell.com>,
Jerin Jacob Kollanukkaran <jerinj@...vell.com>,
Subbaraya Sundeep Bhatta <sbhatta@...vell.com>
Subject: Re: [Patch v3 net-next 6/7] octeontx2-pf: ethtool physical link
status
Hi Jakub,
> -----Original Message-----
> From: Jakub Kicinski <kuba@...nel.org>
> Sent: Wednesday, February 3, 2021 6:54 AM
> To: Hariprasad Kelam <hkelam@...vell.com>
> Cc: netdev@...r.kernel.org; linux-kernel@...r.kernel.org;
> davem@...emloft.net; willemdebruijn.kernel@...il.com;
> andrew@...n.ch; Sunil Kovvuri Goutham <sgoutham@...vell.com>; Linu
> Cherian <lcherian@...vell.com>; Geethasowjanya Akula
> <gakula@...vell.com>; Jerin Jacob Kollanukkaran <jerinj@...vell.com>;
> Subbaraya Sundeep Bhatta <sbhatta@...vell.com>
> Subject: [EXT] Re: [Patch v3 net-next 6/7] octeontx2-pf: ethtool physical link
> status
>
> External Email
>
> ----------------------------------------------------------------------
> On Sun, 31 Jan 2021 18:41:04 +0530 Hariprasad Kelam wrote:
> > From: Christina Jacob <cjacob@...vell.com>
> >
> > Register get_link_ksettings callback to get link status information
> > from the driver. As virtual function (vf) shares same physical link
> > same API is used for both the drivers and for loop back drivers simply
> > returns the fixed values as its does not have physical link.
> >
> > ethtool eth3
> > Settings for eth3:
> > Supported ports: [ ]
> > Supported link modes: 10baseT/Half 10baseT/Full
> > 100baseT/Half 100baseT/Full
> > 1000baseT/Half 1000baseT/Full
> > 10000baseKR/Full
> > 1000baseX/Full
> > Supports auto-negotiation: No
> > Supported FEC modes: BaseR RS
> > Advertised link modes: Not reported
> > Advertised pause frame use: No
> > Advertised auto-negotiation: No
> > Advertised FEC modes: None
> >
> > ethtool lbk0
> > Settings for lbk0:
> > Speed: 100000Mb/s
> > Duplex: Full
> >
> > Signed-off-by: Christina Jacob <cjacob@...vell.com>
> > Signed-off-by: Sunil Goutham <sgoutham@...vell.com>
> > Signed-off-by: Hariprasad Kelam <hkelam@...vell.com>
> > ---
> > .../ethernet/marvell/octeontx2/nic/otx2_ethtool.c | 151
> > +++++++++++++++++++++
> > 1 file changed, 151 insertions(+)
> >
> > diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
> > b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
> > index e5b1a57..d637815 100644
> > --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
> > +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
> > @@ -14,6 +14,7 @@
> > #include <linux/etherdevice.h>
> > #include <linux/log2.h>
> > #include <linux/net_tstamp.h>
> > +#include <linux/linkmode.h>
> >
> > #include "otx2_common.h"
> > #include "otx2_ptp.h"
> > @@ -32,6 +33,24 @@ struct otx2_stat {
> > .index = offsetof(struct otx2_dev_stats, stat) / sizeof(u64), \ }
> >
> > +/* Physical link config */
> > +#define OTX2_ETHTOOL_SUPPORTED_MODES 0x638CCBF
> //110001110001100110010111111
> > +#define OTX2_RESERVED_ETHTOOL_LINK_MODE 0
>
> Just use 0 directly in the code.
>
Will fix this in next version.
> > +static const int otx2_sgmii_features_array[6] = {
> > + ETHTOOL_LINK_MODE_10baseT_Half_BIT,
> > + ETHTOOL_LINK_MODE_10baseT_Full_BIT,
> > + ETHTOOL_LINK_MODE_100baseT_Half_BIT,
> > + ETHTOOL_LINK_MODE_100baseT_Full_BIT,
> > + ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
> > + ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
> > +};
>
> Why is this one up at the top of the file but other arrays are not?
> It seems to be used only in once function.
>
Yes . This array used in only in once function.
Will fix in next version.
> > +enum link_mode {
> > + OTX2_MODE_SUPPORTED,
> > + OTX2_MODE_ADVERTISED
> > +};
> > +
> > static const struct otx2_stat otx2_dev_stats[] = {
> > OTX2_DEV_STAT(rx_ucast_frames),
> > OTX2_DEV_STAT(rx_bcast_frames),
> > @@ -1034,6 +1053,123 @@ static int otx2_set_fecparam(struct net_device
> *netdev,
> > return err;
> > }
> >
> > +static void otx2_get_fec_info(u64 index, int req_mode,
> > + struct ethtool_link_ksettings *link_ksettings) {
> > + __ETHTOOL_DECLARE_LINK_MODE_MASK(otx2_fec_modes) = { 0, };
> > +
> > + switch (index) {
> > + case OTX2_FEC_NONE:
> > + linkmode_set_bit(ETHTOOL_LINK_MODE_FEC_NONE_BIT,
> otx2_fec_modes);
> > + break;
> > + case OTX2_FEC_BASER:
> > + linkmode_set_bit(ETHTOOL_LINK_MODE_FEC_BASER_BIT,
> otx2_fec_modes);
> > + break;
> > + case OTX2_FEC_RS:
> > + linkmode_set_bit(ETHTOOL_LINK_MODE_FEC_RS_BIT,
> otx2_fec_modes);
> > + break;
> > + case OTX2_FEC_BASER | OTX2_FEC_RS:
> > + linkmode_set_bit(ETHTOOL_LINK_MODE_FEC_BASER_BIT,
> otx2_fec_modes);
> > + linkmode_set_bit(ETHTOOL_LINK_MODE_FEC_RS_BIT,
> otx2_fec_modes);
> > + break;
> > + }
> > +
> > + /* Add fec modes to existing modes */
> > + if (req_mode == OTX2_MODE_ADVERTISED)
> > + linkmode_or(link_ksettings->link_modes.advertising,
> > + link_ksettings->link_modes.advertising,
> > + otx2_fec_modes);
> > + else
> > + linkmode_or(link_ksettings->link_modes.supported,
> > + link_ksettings->link_modes.supported,
> > + otx2_fec_modes);
> > +}
> > +
> > +static void otx2_get_link_mode_info(u64 link_mode_bmap,
> > + bool req_mode,
> > + struct ethtool_link_ksettings
> > + *link_ksettings)
> > +{
> > + __ETHTOOL_DECLARE_LINK_MODE_MASK(otx2_link_modes) = { 0, };
> > + u8 bit;
> > +
>
> No empty lines in the middle of variable declarations.
>
Thanks for pointing this. Will fix in next version.
> > + /* CGX link modes to Ethtool link mode mapping */
> > + const int cgx_link_mode[27] = {
> > + 0, /* SGMII Mode */
> > + ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
> > + ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
> > + ETHTOOL_LINK_MODE_10000baseSR_Full_BIT,
> > + ETHTOOL_LINK_MODE_10000baseLR_Full_BIT,
> > + ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
> > + OTX2_RESERVED_ETHTOOL_LINK_MODE,
> > + ETHTOOL_LINK_MODE_25000baseSR_Full_BIT,
> > + OTX2_RESERVED_ETHTOOL_LINK_MODE,
> > + OTX2_RESERVED_ETHTOOL_LINK_MODE,
> > + ETHTOOL_LINK_MODE_25000baseCR_Full_BIT,
> > + ETHTOOL_LINK_MODE_25000baseKR_Full_BIT,
> > + ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT,
> > + ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT,
> > + ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT,
> > + ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT,
> > + OTX2_RESERVED_ETHTOOL_LINK_MODE,
> > + ETHTOOL_LINK_MODE_50000baseSR_Full_BIT,
> > + OTX2_RESERVED_ETHTOOL_LINK_MODE,
> > + ETHTOOL_LINK_MODE_50000baseLR_ER_FR_Full_BIT,
> > + ETHTOOL_LINK_MODE_50000baseCR_Full_BIT,
> > + ETHTOOL_LINK_MODE_50000baseKR_Full_BIT,
> > + OTX2_RESERVED_ETHTOOL_LINK_MODE,
> > + ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT,
> > + ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT,
> > + ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT,
> > + ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT
> > + };
> > +
> > + link_mode_bmap = link_mode_bmap &
> OTX2_ETHTOOL_SUPPORTED_MODES;
> > +
> > + for_each_set_bit(bit, (unsigned long *)&link_mode_bmap, 27) {
> > + /* SGMII mode is set */
> > + if (bit == 0)
>
> Double spaces x2
>
Will fix this in next version.
> > + linkmode_set_bit_array(otx2_sgmii_features_array,
> > +
> ARRAY_SIZE(otx2_sgmii_features_array),
> > + otx2_link_modes);
> > + else
> > + linkmode_set_bit(cgx_link_mode[bit],
> otx2_link_modes);
> > + }
> > +
> > + if (req_mode == OTX2_MODE_ADVERTISED)
> > + linkmode_copy(link_ksettings->link_modes.advertising,
> otx2_link_modes);
> > + else
> > + linkmode_copy(link_ksettings->link_modes.supported,
> > +otx2_link_modes); }
>
> > + otx2_get_link_mode_info(rsp->fwdata.advertised_link_modes,
> OTX2_MODE_ADVERTISED, cmd);
> > + otx2_get_fec_info(rsp->fwdata.advertised_fec,
> OTX2_MODE_ADVERTISED,
> > +cmd);
> > +
> > + otx2_get_link_mode_info(rsp->fwdata.supported_link_modes,
> OTX2_MODE_SUPPORTED, cmd);
> > + otx2_get_fec_info(rsp->fwdata.supported_fec,
> OTX2_MODE_SUPPORTED,
> > +cmd);
>
> Wrap those lines please.
>
Will fix this in next version.
> > + return 0;
> > +}
>
> > +static int otx2vf_get_link_ksettings(struct net_device *netdev,
> > + struct ethtool_link_ksettings *cmd) {
> > + struct otx2_nic *pfvf = netdev_priv(netdev);
> > +
> > + if (is_otx2_lbkvf(pfvf->pdev)) {
> > + cmd->base.duplex = DUPLEX_FULL;
> > + cmd->base.speed = SPEED_100000;
> > + } else {
> > + return otx2_get_link_ksettings(netdev, cmd);
>
> Double space
Will fix this in next version.
Thanks,
Hariprasad k
Powered by blists - more mailing lists