| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1ab4b49b-30f0-f09b-ed62-7acf7e609be2@ti.com>
Date: Fri, 5 Feb 2021 10:33:19 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@....com>
CC: Randy Dunlap <rdunlap@...radead.org>,
<linux-kernel@...r.kernel.org>, <linux-pci@...r.kernel.org>
Subject: Re: [PATCH -next] PCI: endpoint: fix build error, EP NTB driver uses
configfs
Hi Lorenzo,
On 04/02/21 10:39 pm, Lorenzo Pieralisi wrote:
> On Thu, Feb 04, 2021 at 07:15:39PM +0530, Kishon Vijay Abraham I wrote:
>> Hi Lorenzo,
>>
>> On 04/02/21 3:28 pm, Lorenzo Pieralisi wrote:
>>> On Tue, Feb 02, 2021 at 12:12:55PM -0800, Randy Dunlap wrote:
>>>> The pci-epf-ntb driver uses configfs APIs, so it should depend on
>>>> CONFIGFS_FS to prevent build errors.
>>>>
>>>> ld: drivers/pci/endpoint/functions/pci-epf-ntb.o: in function `epf_ntb_add_cfs':
>>>> pci-epf-ntb.c:(.text+0x1b): undefined reference to `config_group_init_type_name'
>>>>
>>>> Fixes: 7dc64244f9e9 ("PCI: endpoint: Add EP function driver to provide NTB functionality")
>>>>
>>>> Signed-off-by: Randy Dunlap <rdunlap@...radead.org>
>>>> Cc: Kishon Vijay Abraham I <kishon@...com>
>>>> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@....com>
>>>> Cc: linux-pci@...r.kernel.org
>>>> ---
>>>> You may switch to 'select CONFIG_FS_FS' if you feel strongly about it.
>>>
>>> Kishon ?
>>
>> There seems to be some issue in the version that got merged. The v11
>> patch series had this fixed [1] by using select CONFIGFS_FS. However
>> whatever was merged seems to be v10 which didn't have select CONFIGFS_FS
>> [2]. I had sent a private mail to you pointing the same (attached for
>> reference, not sure if it was delivered).
>
> I think that Bjorn has not pulled my pci/ntb branch yet (so the one
> in -next is v10 indeed, my one should be v11, please check).
Right, pci/ntb branch in your repo looks correct.
Thanks
Kishon
>
> Thanks,
> Lorenzo
>
>> Thanks
>> Kishon
>>
>> [1] ->
>> https://lore.kernel.org/linux-doc/20210201195809.7342-14-kishon@ti.com/
>>
>> [2] ->
>> https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/pci/endpoint/functions/Kconfig
>>>
>>> Thanks,
>>> Lorenzo
>>>
>>>> drivers/pci/endpoint/functions/Kconfig | 1 +
>>>> 1 file changed, 1 insertion(+)
>>>>
>>>> --- linux-next-20210202.orig/drivers/pci/endpoint/functions/Kconfig
>>>> +++ linux-next-20210202/drivers/pci/endpoint/functions/Kconfig
>>>> @@ -16,6 +16,7 @@ config PCI_EPF_TEST
>>>> config PCI_EPF_NTB
>>>> tristate "PCI Endpoint NTB driver"
>>>> depends on PCI_ENDPOINT
>>>> + depends on CONFIGFS_FS
>>>> help
>>>> Select this configuration option to enable the NTB driver
>>>> for PCI Endpoint. NTB driver implements NTB controller
>
>> Date: Tue, 2 Feb 2021 21:57:37 +0530
>> From: Kishon Vijay Abraham I <kishon@...com>
>> To: Lorenzo Pieralisi <lorenzo.pieralisi@....com>
>> Subject: Re: [PATCH v11 13/17] PCI: endpoint: Add EP function driver to
>> provide NTB functionality
>> User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101
>> Thunderbird/68.10.0
>>
>> Hi Lorenzo,
>>
>> On 02/02/21 1:28 am, Kishon Vijay Abraham I wrote:
>>> Add a new endpoint function driver to provide NTB functionality
>>> using multiple PCIe endpoint instances.
>>>
>>> Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
>>> [arnd@...db.de: Select configfs dependency]
>>> Signed-off-by: Arnd Bergmann <arnd@...db.de>
>>> [yebin10@...wei.com: Fix unused but set variables]
>>> Signed-off-by: Ye Bin <yebin10@...wei.com>
>>> [geert+renesas@...der.be: Explain NTB in PCI_EPF_NTB help text]
>>> Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
>>> ---
>>> drivers/pci/endpoint/functions/Kconfig | 13 +
>>> drivers/pci/endpoint/functions/Makefile | 1 +
>>> drivers/pci/endpoint/functions/pci-epf-ntb.c | 2128 ++++++++++++++++++
>>> 3 files changed, 2142 insertions(+)
>>> create mode 100644 drivers/pci/endpoint/functions/pci-epf-ntb.c
>>>
>>> diff --git a/drivers/pci/endpoint/functions/Kconfig b/drivers/pci/endpoint/functions/Kconfig
>>> index 8820d0f7ec77..5f1242ca2f4e 100644
>>> --- a/drivers/pci/endpoint/functions/Kconfig
>>> +++ b/drivers/pci/endpoint/functions/Kconfig
>>> @@ -12,3 +12,16 @@ config PCI_EPF_TEST
>>> for PCI Endpoint.
>>>
>>> If in doubt, say "N" to disable Endpoint test driver.
>>> +
>>> +config PCI_EPF_NTB
>>> + tristate "PCI Endpoint NTB driver"
>>> + depends on PCI_ENDPOINT
>>> + select CONFIGFS_FS
>>
>> I'm seeing some difference between here and linux-next.
>> https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/pci/endpoint/functions/Kconfig
>>
>> I see "select CONFIGFS_FS" missing in linux-next.
>>
>> Thank You,
>> Kishon
>>
>>> + help
>>> + Select this configuration option to enable the Non-Transparent
>>> + Bridge (NTB) driver for PCI Endpoint. NTB driver implements NTB
>>> + controller functionality using multiple PCIe endpoint instances.
>>> + It can support NTB endpoint function devices created using
>>> + device tree.
>>> +
>>> + If in doubt, say "N" to disable Endpoint NTB driver.
>>> diff --git a/drivers/pci/endpoint/functions/Makefile b/drivers/pci/endpoint/functions/Makefile
>>> index d6fafff080e2..96ab932a537a 100644
>>> --- a/drivers/pci/endpoint/functions/Makefile
>>> +++ b/drivers/pci/endpoint/functions/Makefile
>>> @@ -4,3 +4,4 @@
>>> #
>>>
>>> obj-$(CONFIG_PCI_EPF_TEST) += pci-epf-test.o
>>> +obj-$(CONFIG_PCI_EPF_NTB) += pci-epf-ntb.o
>>> diff --git a/drivers/pci/endpoint/functions/pci-epf-ntb.c b/drivers/pci/endpoint/functions/pci-epf-ntb.c
>>> new file mode 100644
>>> index 000000000000..338148cf56f5
>>> --- /dev/null
>>> +++ b/drivers/pci/endpoint/functions/pci-epf-ntb.c
>>> @@ -0,0 +1,2128 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/**
>>> + * Endpoint Function Driver to implement Non-Transparent Bridge functionality
>>> + *
>>> + * Copyright (C) 2020 Texas Instruments
>>> + * Author: Kishon Vijay Abraham I <kishon@...com>
>>> + */
>>> +
>>> +/*
>>> + * The PCI NTB function driver configures the SoC with multiple PCIe Endpoint
>>> + * (EP) controller instances (see diagram below) in such a way that
>>> + * transactions from one EP controller are routed to the other EP controller.
>>> + * Once PCI NTB function driver configures the SoC with multiple EP instances,
>>> + * HOST1 and HOST2 can communicate with each other using SoC as a bridge.
>>> + *
>>> + * +-------------+ +-------------+
>>> + * | | | |
>>> + * | HOST1 | | HOST2 |
>>> + * | | | |
>>> + * +------^------+ +------^------+
>>> + * | |
>>> + * | |
>>> + * +---------|-------------------------------------------------|---------+
>>> + * | +------v------+ +------v------+ |
>>> + * | | | | | |
>>> + * | | EP | | EP | |
>>> + * | | CONTROLLER1 | | CONTROLLER2 | |
>>> + * | | <-----------------------------------> | |
>>> + * | | | | | |
>>> + * | | | | | |
>>> + * | | | SoC With Multiple EP Instances | | |
>>> + * | | | (Configured using NTB Function) | | |
>>> + * | +-------------+ +-------------+ |
>>> + * +---------------------------------------------------------------------+
>>> + */
>>> +
>>> +#include <linux/delay.h>
>>> +#include <linux/io.h>
>>> +#include <linux/module.h>
>>> +#include <linux/slab.h>
>>> +
>>> +#include <linux/pci-epc.h>
>>> +#include <linux/pci-epf.h>
>>> +
>>> +static struct workqueue_struct *kpcintb_workqueue;
>>> +
>>> +#define COMMAND_CONFIGURE_DOORBELL 1
>>> +#define COMMAND_TEARDOWN_DOORBELL 2
>>> +#define COMMAND_CONFIGURE_MW 3
>>> +#define COMMAND_TEARDOWN_MW 4
>>> +#define COMMAND_LINK_UP 5
>>> +#define COMMAND_LINK_DOWN 6
>>> +
>>> +#define COMMAND_STATUS_OK 1
>>> +#define COMMAND_STATUS_ERROR 2
>>> +
>>> +#define LINK_STATUS_UP BIT(0)
>>> +
>>> +#define SPAD_COUNT 64
>>> +#define DB_COUNT 4
>>> +#define NTB_MW_OFFSET 2
>>> +#define DB_COUNT_MASK GENMASK(15, 0)
>>> +#define MSIX_ENABLE BIT(16)
>>> +#define MAX_DB_COUNT 32
>>> +#define MAX_MW 4
>>> +
>>> +enum epf_ntb_bar {
>>> + BAR_CONFIG,
>>> + BAR_PEER_SPAD,
>>> + BAR_DB_MW1,
>>> + BAR_MW2,
>>> + BAR_MW3,
>>> + BAR_MW4,
>>> +};
>>> +
>>> +struct epf_ntb {
>>> + u32 num_mws;
>>> + u32 db_count;
>>> + u32 spad_count;
>>> + struct pci_epf *epf;
>>> + u64 mws_size[MAX_MW];
>>> + struct config_group group;
>>> + struct epf_ntb_epc *epc[2];
>>> +};
>>> +
>>> +#define to_epf_ntb(epf_group) container_of((epf_group), struct epf_ntb, group)
>>> +
>>> +struct epf_ntb_epc {
>>> + u8 func_no;
>>> + bool linkup;
>>> + bool is_msix;
>>> + int msix_bar;
>>> + u32 spad_size;
>>> + struct pci_epc *epc;
>>> + struct epf_ntb *epf_ntb;
>>> + void __iomem *mw_addr[6];
>>> + size_t msix_table_offset;
>>> + struct epf_ntb_ctrl *reg;
>>> + struct pci_epf_bar *epf_bar;
>>> + enum pci_barno epf_ntb_bar[6];
>>> + struct delayed_work cmd_handler;
>>> + enum pci_epc_interface_type type;
>>> + const struct pci_epc_features *epc_features;
>>> +};
>>> +
>>> +struct epf_ntb_ctrl {
>>> + u32 command;
>>> + u32 argument;
>>> + u16 command_status;
>>> + u16 link_status;
>>> + u32 topology;
>>> + u64 addr;
>>> + u64 size;
>>> + u32 num_mws;
>>> + u32 mw1_offset;
>>> + u32 spad_offset;
>>> + u32 spad_count;
>>> + u32 db_entry_size;
>>> + u32 db_data[MAX_DB_COUNT];
>>> + u32 db_offset[MAX_DB_COUNT];
>>> +} __packed;
>>> +
>>> +static struct pci_epf_header epf_ntb_header = {
>>> + .vendorid = PCI_ANY_ID,
>>> + .deviceid = PCI_ANY_ID,
>>> + .baseclass_code = PCI_BASE_CLASS_MEMORY,
>>> + .interrupt_pin = PCI_INTERRUPT_INTA,
>>> +};
>>> +
>>> +/**
>>> + * epf_ntb_link_up() - Raise link_up interrupt to both the hosts
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + * @link_up: true or false indicating Link is UP or Down
>>> + *
>>> + * Once NTB function in HOST1 and the NTB function in HOST2 invoke
>>> + * ntb_link_enable(), this NTB function driver will trigger a link event to
>>> + * the NTB client in both the hosts.
>>> + */
>>> +static int epf_ntb_link_up(struct epf_ntb *ntb, bool link_up)
>>> +{
>>> + enum pci_epc_interface_type type;
>>> + enum pci_epc_irq_type irq_type;
>>> + struct epf_ntb_epc *ntb_epc;
>>> + struct epf_ntb_ctrl *ctrl;
>>> + struct pci_epc *epc;
>>> + bool is_msix;
>>> + u8 func_no;
>>> + int ret;
>>> +
>>> + for (type = PRIMARY_INTERFACE; type <= SECONDARY_INTERFACE; type++) {
>>> + ntb_epc = ntb->epc[type];
>>> + epc = ntb_epc->epc;
>>> + func_no = ntb_epc->func_no;
>>> + is_msix = ntb_epc->is_msix;
>>> + ctrl = ntb_epc->reg;
>>> + if (link_up)
>>> + ctrl->link_status |= LINK_STATUS_UP;
>>> + else
>>> + ctrl->link_status &= ~LINK_STATUS_UP;
>>> + irq_type = is_msix ? PCI_EPC_IRQ_MSIX : PCI_EPC_IRQ_MSI;
>>> + ret = pci_epc_raise_irq(epc, func_no, irq_type, 1);
>>> + if (ret) {
>>> + dev_err(&epc->dev,
>>> + "%s intf: Failed to raise Link Up IRQ\n",
>>> + pci_epc_interface_string(type));
>>> + return ret;
>>> + }
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_configure_mw() - Configure the Outbound Address Space for one host
>>> + * to access the memory window of other host
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + * @type: PRIMARY interface or SECONDARY interface
>>> + * @mw: Index of the memory window (either 0, 1, 2 or 3)
>>> + *
>>> + * +-----------------+ +---->+----------------+-----------+-----------------+
>>> + * | BAR0 | | | Doorbell 1 +-----------> MSI|X ADDRESS 1 |
>>> + * +-----------------+ | +----------------+ +-----------------+
>>> + * | BAR1 | | | Doorbell 2 +---------+ | |
>>> + * +-----------------+----+ +----------------+ | | |
>>> + * | BAR2 | | Doorbell 3 +-------+ | +-----------------+
>>> + * +-----------------+----+ +----------------+ | +-> MSI|X ADDRESS 2 |
>>> + * | BAR3 | | | Doorbell 4 +-----+ | +-----------------+
>>> + * +-----------------+ | |----------------+ | | | |
>>> + * | BAR4 | | | | | | +-----------------+
>>> + * +-----------------+ | | MW1 +---+ | +-->+ MSI|X ADDRESS 3||
>>> + * | BAR5 | | | | | | +-----------------+
>>> + * +-----------------+ +---->-----------------+ | | | |
>>> + * EP CONTROLLER 1 | | | | +-----------------+
>>> + * | | | +---->+ MSI|X ADDRESS 4 |
>>> + * +----------------+ | +-----------------+
>>> + * (A) EP CONTROLLER 2 | | |
>>> + * (OB SPACE) | | |
>>> + * +-------> MW1 |
>>> + * | |
>>> + * | |
>>> + * (B) +-----------------+
>>> + * | |
>>> + * | |
>>> + * | |
>>> + * | |
>>> + * | |
>>> + * +-----------------+
>>> + * PCI Address Space
>>> + * (Managed by HOST2)
>>> + *
>>> + * This function performs stage (B) in the above diagram (see MW1) i.e., map OB
>>> + * address space of memory window to PCI address space.
>>> + *
>>> + * This operation requires 3 parameters
>>> + * 1) Address in the outbound address space
>>> + * 2) Address in the PCI Address space
>>> + * 3) Size of the address region to be mapped
>>> + *
>>> + * The address in the outbound address space (for MW1, MW2, MW3 and MW4) is
>>> + * stored in epf_bar corresponding to BAR_DB_MW1 for MW1 and BAR_MW2, BAR_MW3
>>> + * BAR_MW4 for rest of the BARs of epf_ntb_epc that is connected to HOST1. This
>>> + * is populated in epf_ntb_alloc_peer_mem() in this driver.
>>> + *
>>> + * The address and size of the PCI address region that has to be mapped would
>>> + * be provided by HOST2 in ctrl->addr and ctrl->size of epf_ntb_epc that is
>>> + * connected to HOST2.
>>> + *
>>> + * Please note Memory window1 (MW1) and Doorbell registers together will be
>>> + * mapped to a single BAR (BAR2) above for 32-bit BARs. The exact BAR that's
>>> + * used for Memory window (MW) can be obtained from epf_ntb_bar[BAR_DB_MW1],
>>> + * epf_ntb_bar[BAR_MW2], epf_ntb_bar[BAR_MW2], epf_ntb_bar[BAR_MW2].
>>> + */
>>> +static int epf_ntb_configure_mw(struct epf_ntb *ntb,
>>> + enum pci_epc_interface_type type, u32 mw)
>>> +{
>>> + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc;
>>> + struct pci_epf_bar *peer_epf_bar;
>>> + enum pci_barno peer_barno;
>>> + struct epf_ntb_ctrl *ctrl;
>>> + phys_addr_t phys_addr;
>>> + struct pci_epc *epc;
>>> + u64 addr, size;
>>> + int ret = 0;
>>> + u8 func_no;
>>> +
>>> + ntb_epc = ntb->epc[type];
>>> + epc = ntb_epc->epc;
>>> +
>>> + peer_ntb_epc = ntb->epc[!type];
>>> + peer_barno = peer_ntb_epc->epf_ntb_bar[mw + NTB_MW_OFFSET];
>>> + peer_epf_bar = &peer_ntb_epc->epf_bar[peer_barno];
>>> +
>>> + phys_addr = peer_epf_bar->phys_addr;
>>> + ctrl = ntb_epc->reg;
>>> + addr = ctrl->addr;
>>> + size = ctrl->size;
>>> + if (mw + NTB_MW_OFFSET == BAR_DB_MW1)
>>> + phys_addr += ctrl->mw1_offset;
>>> +
>>> + if (size > ntb->mws_size[mw]) {
>>> + dev_err(&epc->dev,
>>> + "%s intf: MW: %d Req Sz:%llxx > Supported Sz:%llx\n",
>>> + pci_epc_interface_string(type), mw, size,
>>> + ntb->mws_size[mw]);
>>> + ret = -EINVAL;
>>> + goto err_invalid_size;
>>> + }
>>> +
>>> + func_no = ntb_epc->func_no;
>>> +
>>> + ret = pci_epc_map_addr(epc, func_no, phys_addr, addr, size);
>>> + if (ret)
>>> + dev_err(&epc->dev,
>>> + "%s intf: Failed to map memory window %d address\n",
>>> + pci_epc_interface_string(type), mw);
>>> +
>>> +err_invalid_size:
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_teardown_mw() - Teardown the configured OB ATU
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + * @type: PRIMARY interface or SECONDARY interface
>>> + * @mw: Index of the memory window (either 0, 1, 2 or 3)
>>> + *
>>> + * Teardown the configured OB ATU configured in epf_ntb_configure_mw() using
>>> + * pci_epc_unmap_addr()
>>> + */
>>> +static void epf_ntb_teardown_mw(struct epf_ntb *ntb,
>>> + enum pci_epc_interface_type type, u32 mw)
>>> +{
>>> + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc;
>>> + struct pci_epf_bar *peer_epf_bar;
>>> + enum pci_barno peer_barno;
>>> + struct epf_ntb_ctrl *ctrl;
>>> + phys_addr_t phys_addr;
>>> + struct pci_epc *epc;
>>> + u8 func_no;
>>> +
>>> + ntb_epc = ntb->epc[type];
>>> + epc = ntb_epc->epc;
>>> +
>>> + peer_ntb_epc = ntb->epc[!type];
>>> + peer_barno = peer_ntb_epc->epf_ntb_bar[mw + NTB_MW_OFFSET];
>>> + peer_epf_bar = &peer_ntb_epc->epf_bar[peer_barno];
>>> +
>>> + phys_addr = peer_epf_bar->phys_addr;
>>> + ctrl = ntb_epc->reg;
>>> + if (mw + NTB_MW_OFFSET == BAR_DB_MW1)
>>> + phys_addr += ctrl->mw1_offset;
>>> + func_no = ntb_epc->func_no;
>>> +
>>> + pci_epc_unmap_addr(epc, func_no, phys_addr);
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_configure_msi() - Map OB address space to MSI address
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + * @type: PRIMARY interface or SECONDARY interface
>>> + * @db_count: Number of doorbell interrupts to map
>>> + *
>>> + *+-----------------+ +----->+----------------+-----------+-----------------+
>>> + *| BAR0 | | | Doorbell 1 +---+-------> MSI ADDRESS |
>>> + *+-----------------+ | +----------------+ | +-----------------+
>>> + *| BAR1 | | | Doorbell 2 +---+ | |
>>> + *+-----------------+----+ +----------------+ | | |
>>> + *| BAR2 | | Doorbell 3 +---+ | |
>>> + *+-----------------+----+ +----------------+ | | |
>>> + *| BAR3 | | | Doorbell 4 +---+ | |
>>> + *+-----------------+ | |----------------+ | |
>>> + *| BAR4 | | | | | |
>>> + *+-----------------+ | | MW1 | | |
>>> + *| BAR5 | | | | | |
>>> + *+-----------------+ +----->-----------------+ | |
>>> + * EP CONTROLLER 1 | | | |
>>> + * | | | |
>>> + * +----------------+ +-----------------+
>>> + * (A) EP CONTROLLER 2 | |
>>> + * (OB SPACE) | |
>>> + * | MW1 |
>>> + * | |
>>> + * | |
>>> + * (B) +-----------------+
>>> + * | |
>>> + * | |
>>> + * | |
>>> + * | |
>>> + * | |
>>> + * +-----------------+
>>> + * PCI Address Space
>>> + * (Managed by HOST2)
>>> + *
>>> + *
>>> + * This function performs stage (B) in the above diagram (see Doorbell 1,
>>> + * Doorbell 2, Doorbell 3, Doorbell 4) i.e map OB address space corresponding to
>>> + * doorbell to MSI address in PCI address space.
>>> + *
>>> + * This operation requires 3 parameters
>>> + * 1) Address reserved for doorbell in the outbound address space
>>> + * 2) MSI-X address in the PCIe Address space
>>> + * 3) Number of MSI-X interrupts that has to be configured
>>> + *
>>> + * The address in the outbound address space (for the Doorbell) is stored in
>>> + * epf_bar corresponding to BAR_DB_MW1 of epf_ntb_epc that is connected to
>>> + * HOST1. This is populated in epf_ntb_alloc_peer_mem() in this driver along
>>> + * with address for MW1.
>>> + *
>>> + * pci_epc_map_msi_irq() takes the MSI address from MSI capability register
>>> + * and maps the OB address (obtained in epf_ntb_alloc_peer_mem()) to the MSI
>>> + * address.
>>> + *
>>> + * epf_ntb_configure_msi() also stores the MSI data to raise each interrupt
>>> + * in db_data of the peer's control region. This helps the peer to raise
>>> + * doorbell of the other host by writing db_data to the BAR corresponding to
>>> + * BAR_DB_MW1.
>>> + */
>>> +static int epf_ntb_configure_msi(struct epf_ntb *ntb,
>>> + enum pci_epc_interface_type type, u16 db_count)
>>> +{
>>> + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc;
>>> + u32 db_entry_size, db_data, db_offset;
>>> + struct pci_epf_bar *peer_epf_bar;
>>> + struct epf_ntb_ctrl *peer_ctrl;
>>> + enum pci_barno peer_barno;
>>> + phys_addr_t phys_addr;
>>> + struct pci_epc *epc;
>>> + u8 func_no;
>>> + int ret, i;
>>> +
>>> + ntb_epc = ntb->epc[type];
>>> + epc = ntb_epc->epc;
>>> +
>>> + peer_ntb_epc = ntb->epc[!type];
>>> + peer_barno = peer_ntb_epc->epf_ntb_bar[BAR_DB_MW1];
>>> + peer_epf_bar = &peer_ntb_epc->epf_bar[peer_barno];
>>> + peer_ctrl = peer_ntb_epc->reg;
>>> + db_entry_size = peer_ctrl->db_entry_size;
>>> +
>>> + phys_addr = peer_epf_bar->phys_addr;
>>> + func_no = ntb_epc->func_no;
>>> +
>>> + ret = pci_epc_map_msi_irq(epc, func_no, phys_addr, db_count,
>>> + db_entry_size, &db_data, &db_offset);
>>> + if (ret) {
>>> + dev_err(&epc->dev, "%s intf: Failed to map MSI IRQ\n",
>>> + pci_epc_interface_string(type));
>>> + return ret;
>>> + }
>>> +
>>> + for (i = 0; i < db_count; i++) {
>>> + peer_ctrl->db_data[i] = db_data | i;
>>> + peer_ctrl->db_offset[i] = db_offset;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_configure_msix() - Map OB address space to MSI-X address
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + * @type: PRIMARY interface or SECONDARY interface
>>> + * @db_count: Number of doorbell interrupts to map
>>> + *
>>> + *+-----------------+ +----->+----------------+-----------+-----------------+
>>> + *| BAR0 | | | Doorbell 1 +-----------> MSI-X ADDRESS 1 |
>>> + *+-----------------+ | +----------------+ +-----------------+
>>> + *| BAR1 | | | Doorbell 2 +---------+ | |
>>> + *+-----------------+----+ +----------------+ | | |
>>> + *| BAR2 | | Doorbell 3 +-------+ | +-----------------+
>>> + *+-----------------+----+ +----------------+ | +-> MSI-X ADDRESS 2 |
>>> + *| BAR3 | | | Doorbell 4 +-----+ | +-----------------+
>>> + *+-----------------+ | |----------------+ | | | |
>>> + *| BAR4 | | | | | | +-----------------+
>>> + *+-----------------+ | | MW1 + | +-->+ MSI-X ADDRESS 3||
>>> + *| BAR5 | | | | | +-----------------+
>>> + *+-----------------+ +----->-----------------+ | | |
>>> + * EP CONTROLLER 1 | | | +-----------------+
>>> + * | | +---->+ MSI-X ADDRESS 4 |
>>> + * +----------------+ +-----------------+
>>> + * (A) EP CONTROLLER 2 | |
>>> + * (OB SPACE) | |
>>> + * | MW1 |
>>> + * | |
>>> + * | |
>>> + * (B) +-----------------+
>>> + * | |
>>> + * | |
>>> + * | |
>>> + * | |
>>> + * | |
>>> + * +-----------------+
>>> + * PCI Address Space
>>> + * (Managed by HOST2)
>>> + *
>>> + * This function performs stage (B) in the above diagram (see Doorbell 1,
>>> + * Doorbell 2, Doorbell 3, Doorbell 4) i.e map OB address space corresponding to
>>> + * doorbell to MSI-X address in PCI address space.
>>> + *
>>> + * This operation requires 3 parameters
>>> + * 1) Address reserved for doorbell in the outbound address space
>>> + * 2) MSI-X address in the PCIe Address space
>>> + * 3) Number of MSI-X interrupts that has to be configured
>>> + *
>>> + * The address in the outbound address space (for the Doorbell) is stored in
>>> + * epf_bar corresponding to BAR_DB_MW1 of epf_ntb_epc that is connected to
>>> + * HOST1. This is populated in epf_ntb_alloc_peer_mem() in this driver along
>>> + * with address for MW1.
>>> + *
>>> + * The MSI-X address is in the MSI-X table of EP CONTROLLER 2 and
>>> + * the count of doorbell is in ctrl->argument of epf_ntb_epc that is connected
>>> + * to HOST2. MSI-X table is stored memory mapped to ntb_epc->msix_bar and the
>>> + * offset is in ntb_epc->msix_table_offset. From this epf_ntb_configure_msix()
>>> + * gets the MSI-X address and data.
>>> + *
>>> + * epf_ntb_configure_msix() also stores the MSI-X data to raise each interrupt
>>> + * in db_data of the peer's control region. This helps the peer to raise
>>> + * doorbell of the other host by writing db_data to the BAR corresponding to
>>> + * BAR_DB_MW1.
>>> + */
>>> +static int epf_ntb_configure_msix(struct epf_ntb *ntb,
>>> + enum pci_epc_interface_type type,
>>> + u16 db_count)
>>> +{
>>> + const struct pci_epc_features *epc_features;
>>> + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc;
>>> + struct pci_epf_bar *peer_epf_bar, *epf_bar;
>>> + struct pci_epf_msix_tbl *msix_tbl;
>>> + struct epf_ntb_ctrl *peer_ctrl;
>>> + u32 db_entry_size, msg_data;
>>> + enum pci_barno peer_barno;
>>> + phys_addr_t phys_addr;
>>> + struct pci_epc *epc;
>>> + size_t align;
>>> + u64 msg_addr;
>>> + u8 func_no;
>>> + int ret, i;
>>> +
>>> + ntb_epc = ntb->epc[type];
>>> + epc = ntb_epc->epc;
>>> +
>>> + epf_bar = &ntb_epc->epf_bar[ntb_epc->msix_bar];
>>> + msix_tbl = epf_bar->addr + ntb_epc->msix_table_offset;
>>> +
>>> + peer_ntb_epc = ntb->epc[!type];
>>> + peer_barno = peer_ntb_epc->epf_ntb_bar[BAR_DB_MW1];
>>> + peer_epf_bar = &peer_ntb_epc->epf_bar[peer_barno];
>>> + phys_addr = peer_epf_bar->phys_addr;
>>> + peer_ctrl = peer_ntb_epc->reg;
>>> + epc_features = ntb_epc->epc_features;
>>> + align = epc_features->align;
>>> +
>>> + func_no = ntb_epc->func_no;
>>> + db_entry_size = peer_ctrl->db_entry_size;
>>> +
>>> + for (i = 0; i < db_count; i++) {
>>> + msg_addr = ALIGN_DOWN(msix_tbl[i].msg_addr, align);
>>> + msg_data = msix_tbl[i].msg_data;
>>> + ret = pci_epc_map_addr(epc, func_no, phys_addr, msg_addr,
>>> + db_entry_size);
>>> + if (ret) {
>>> + dev_err(&epc->dev,
>>> + "%s intf: Failed to configure MSI-X IRQ\n",
>>> + pci_epc_interface_string(type));
>>> + return ret;
>>> + }
>>> + phys_addr = phys_addr + db_entry_size;
>>> + peer_ctrl->db_data[i] = msg_data;
>>> + peer_ctrl->db_offset[i] = msix_tbl[i].msg_addr & (align - 1);
>>> + }
>>> + ntb_epc->is_msix = true;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_configure_db() - Configure the Outbound Address Space for one host
>>> + * to ring the doorbell of other host
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + * @type: PRIMARY interface or SECONDARY interface
>>> + * @db_count: Count of the number of doorbells that has to be configured
>>> + * @msix: Indicates whether MSI-X or MSI should be used
>>> + *
>>> + * Invokes epf_ntb_configure_msix() or epf_ntb_configure_msi() required for
>>> + * one HOST to ring the doorbell of other HOST.
>>> + */
>>> +static int epf_ntb_configure_db(struct epf_ntb *ntb,
>>> + enum pci_epc_interface_type type,
>>> + u16 db_count, bool msix)
>>> +{
>>> + struct epf_ntb_epc *ntb_epc;
>>> + struct pci_epc *epc;
>>> + int ret;
>>> +
>>> + if (db_count > MAX_DB_COUNT)
>>> + return -EINVAL;
>>> +
>>> + ntb_epc = ntb->epc[type];
>>> + epc = ntb_epc->epc;
>>> +
>>> + if (msix)
>>> + ret = epf_ntb_configure_msix(ntb, type, db_count);
>>> + else
>>> + ret = epf_ntb_configure_msi(ntb, type, db_count);
>>> +
>>> + if (ret)
>>> + dev_err(&epc->dev, "%s intf: Failed to configure DB\n",
>>> + pci_epc_interface_string(type));
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_teardown_db() - Unmap address in OB address space to MSI/MSI-X
>>> + * address
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + * @type: PRIMARY interface or SECONDARY interface
>>> + *
>>> + * Invoke pci_epc_unmap_addr() to unmap OB address to MSI/MSI-X address.
>>> + */
>>> +static void
>>> +epf_ntb_teardown_db(struct epf_ntb *ntb, enum pci_epc_interface_type type)
>>> +{
>>> + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc;
>>> + struct pci_epf_bar *peer_epf_bar;
>>> + enum pci_barno peer_barno;
>>> + phys_addr_t phys_addr;
>>> + struct pci_epc *epc;
>>> + u8 func_no;
>>> +
>>> + ntb_epc = ntb->epc[type];
>>> + epc = ntb_epc->epc;
>>> +
>>> + peer_ntb_epc = ntb->epc[!type];
>>> + peer_barno = peer_ntb_epc->epf_ntb_bar[BAR_DB_MW1];
>>> + peer_epf_bar = &peer_ntb_epc->epf_bar[peer_barno];
>>> + phys_addr = peer_epf_bar->phys_addr;
>>> + func_no = ntb_epc->func_no;
>>> +
>>> + pci_epc_unmap_addr(epc, func_no, phys_addr);
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_cmd_handler() - Handle commands provided by the NTB Host
>>> + * @work: work_struct for the two epf_ntb_epc (PRIMARY and SECONDARY)
>>> + *
>>> + * Workqueue function that gets invoked for the two epf_ntb_epc
>>> + * periodically (once every 5ms) to see if it has received any commands
>>> + * from NTB host. The host can send commands to configure doorbell or
>>> + * configure memory window or to update link status.
>>> + */
>>> +static void epf_ntb_cmd_handler(struct work_struct *work)
>>> +{
>>> + enum pci_epc_interface_type type;
>>> + struct epf_ntb_epc *ntb_epc;
>>> + struct epf_ntb_ctrl *ctrl;
>>> + u32 command, argument;
>>> + struct epf_ntb *ntb;
>>> + struct device *dev;
>>> + u16 db_count;
>>> + bool is_msix;
>>> + int ret;
>>> +
>>> + ntb_epc = container_of(work, struct epf_ntb_epc, cmd_handler.work);
>>> + ctrl = ntb_epc->reg;
>>> + command = ctrl->command;
>>> + if (!command)
>>> + goto reset_handler;
>>> + argument = ctrl->argument;
>>> +
>>> + ctrl->command = 0;
>>> + ctrl->argument = 0;
>>> +
>>> + ctrl = ntb_epc->reg;
>>> + type = ntb_epc->type;
>>> + ntb = ntb_epc->epf_ntb;
>>> + dev = &ntb->epf->dev;
>>> +
>>> + switch (command) {
>>> + case COMMAND_CONFIGURE_DOORBELL:
>>> + db_count = argument & DB_COUNT_MASK;
>>> + is_msix = argument & MSIX_ENABLE;
>>> + ret = epf_ntb_configure_db(ntb, type, db_count, is_msix);
>>> + if (ret < 0)
>>> + ctrl->command_status = COMMAND_STATUS_ERROR;
>>> + else
>>> + ctrl->command_status = COMMAND_STATUS_OK;
>>> + break;
>>> + case COMMAND_TEARDOWN_DOORBELL:
>>> + epf_ntb_teardown_db(ntb, type);
>>> + ctrl->command_status = COMMAND_STATUS_OK;
>>> + break;
>>> + case COMMAND_CONFIGURE_MW:
>>> + ret = epf_ntb_configure_mw(ntb, type, argument);
>>> + if (ret < 0)
>>> + ctrl->command_status = COMMAND_STATUS_ERROR;
>>> + else
>>> + ctrl->command_status = COMMAND_STATUS_OK;
>>> + break;
>>> + case COMMAND_TEARDOWN_MW:
>>> + epf_ntb_teardown_mw(ntb, type, argument);
>>> + ctrl->command_status = COMMAND_STATUS_OK;
>>> + break;
>>> + case COMMAND_LINK_UP:
>>> + ntb_epc->linkup = true;
>>> + if (ntb->epc[PRIMARY_INTERFACE]->linkup &&
>>> + ntb->epc[SECONDARY_INTERFACE]->linkup) {
>>> + ret = epf_ntb_link_up(ntb, true);
>>> + if (ret < 0)
>>> + ctrl->command_status = COMMAND_STATUS_ERROR;
>>> + else
>>> + ctrl->command_status = COMMAND_STATUS_OK;
>>> + goto reset_handler;
>>> + }
>>> + ctrl->command_status = COMMAND_STATUS_OK;
>>> + break;
>>> + case COMMAND_LINK_DOWN:
>>> + ntb_epc->linkup = false;
>>> + ret = epf_ntb_link_up(ntb, false);
>>> + if (ret < 0)
>>> + ctrl->command_status = COMMAND_STATUS_ERROR;
>>> + else
>>> + ctrl->command_status = COMMAND_STATUS_OK;
>>> + break;
>>> + default:
>>> + dev_err(dev, "%s intf UNKNOWN command: %d\n",
>>> + pci_epc_interface_string(type), command);
>>> + break;
>>> + }
>>> +
>>> +reset_handler:
>>> + queue_delayed_work(kpcintb_workqueue, &ntb_epc->cmd_handler,
>>> + msecs_to_jiffies(5));
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_peer_spad_bar_clear() - Clear Peer Scratchpad BAR
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + *
>>> + *+-----------------+------->+------------------+ +-----------------+
>>> + *| BAR0 | | CONFIG REGION | | BAR0 |
>>> + *+-----------------+----+ +------------------+<-------+-----------------+
>>> + *| BAR1 | | |SCRATCHPAD REGION | | BAR1 |
>>> + *+-----------------+ +-->+------------------+<-------+-----------------+
>>> + *| BAR2 | Local Memory | BAR2 |
>>> + *+-----------------+ +-----------------+
>>> + *| BAR3 | | BAR3 |
>>> + *+-----------------+ +-----------------+
>>> + *| BAR4 | | BAR4 |
>>> + *+-----------------+ +-----------------+
>>> + *| BAR5 | | BAR5 |
>>> + *+-----------------+ +-----------------+
>>> + * EP CONTROLLER 1 EP CONTROLLER 2
>>> + *
>>> + * Clear BAR1 of EP CONTROLLER 2 which contains the HOST2's peer scratchpad
>>> + * region. While BAR1 is the default peer scratchpad BAR, an NTB could have
>>> + * other BARs for peer scratchpad (because of 64-bit BARs or reserved BARs).
>>> + * This function can get the exact BAR used for peer scratchpad from
>>> + * epf_ntb_bar[BAR_PEER_SPAD].
>>> + *
>>> + * Since HOST2's peer scratchpad is also HOST1's self scratchpad, this function
>>> + * gets the address of peer scratchpad from
>>> + * peer_ntb_epc->epf_ntb_bar[BAR_CONFIG].
>>> + */
>>> +static void epf_ntb_peer_spad_bar_clear(struct epf_ntb_epc *ntb_epc)
>>> +{
>>> + struct pci_epf_bar *epf_bar;
>>> + enum pci_barno barno;
>>> + struct pci_epc *epc;
>>> + u8 func_no;
>>> +
>>> + epc = ntb_epc->epc;
>>> + func_no = ntb_epc->func_no;
>>> + barno = ntb_epc->epf_ntb_bar[BAR_PEER_SPAD];
>>> + epf_bar = &ntb_epc->epf_bar[barno];
>>> + pci_epc_clear_bar(epc, func_no, epf_bar);
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_peer_spad_bar_set() - Set peer scratchpad BAR
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + *
>>> + *+-----------------+------->+------------------+ +-----------------+
>>> + *| BAR0 | | CONFIG REGION | | BAR0 |
>>> + *+-----------------+----+ +------------------+<-------+-----------------+
>>> + *| BAR1 | | |SCRATCHPAD REGION | | BAR1 |
>>> + *+-----------------+ +-->+------------------+<-------+-----------------+
>>> + *| BAR2 | Local Memory | BAR2 |
>>> + *+-----------------+ +-----------------+
>>> + *| BAR3 | | BAR3 |
>>> + *+-----------------+ +-----------------+
>>> + *| BAR4 | | BAR4 |
>>> + *+-----------------+ +-----------------+
>>> + *| BAR5 | | BAR5 |
>>> + *+-----------------+ +-----------------+
>>> + * EP CONTROLLER 1 EP CONTROLLER 2
>>> + *
>>> + * Set BAR1 of EP CONTROLLER 2 which contains the HOST2's peer scratchpad
>>> + * region. While BAR1 is the default peer scratchpad BAR, an NTB could have
>>> + * other BARs for peer scratchpad (because of 64-bit BARs or reserved BARs).
>>> + * This function can get the exact BAR used for peer scratchpad from
>>> + * epf_ntb_bar[BAR_PEER_SPAD].
>>> + *
>>> + * Since HOST2's peer scratchpad is also HOST1's self scratchpad, this function
>>> + * gets the address of peer scratchpad from
>>> + * peer_ntb_epc->epf_ntb_bar[BAR_CONFIG].
>>> + */
>>> +static int epf_ntb_peer_spad_bar_set(struct epf_ntb *ntb,
>>> + enum pci_epc_interface_type type)
>>> +{
>>> + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc;
>>> + struct pci_epf_bar *peer_epf_bar, *epf_bar;
>>> + enum pci_barno peer_barno, barno;
>>> + u32 peer_spad_offset;
>>> + struct pci_epc *epc;
>>> + struct device *dev;
>>> + u8 func_no;
>>> + int ret;
>>> +
>>> + dev = &ntb->epf->dev;
>>> +
>>> + peer_ntb_epc = ntb->epc[!type];
>>> + peer_barno = peer_ntb_epc->epf_ntb_bar[BAR_CONFIG];
>>> + peer_epf_bar = &peer_ntb_epc->epf_bar[peer_barno];
>>> +
>>> + ntb_epc = ntb->epc[type];
>>> + barno = ntb_epc->epf_ntb_bar[BAR_PEER_SPAD];
>>> + epf_bar = &ntb_epc->epf_bar[barno];
>>> + func_no = ntb_epc->func_no;
>>> + epc = ntb_epc->epc;
>>> +
>>> + peer_spad_offset = peer_ntb_epc->reg->spad_offset;
>>> + epf_bar->phys_addr = peer_epf_bar->phys_addr + peer_spad_offset;
>>> + epf_bar->size = peer_ntb_epc->spad_size;
>>> + epf_bar->barno = barno;
>>> + epf_bar->flags = PCI_BASE_ADDRESS_MEM_TYPE_32;
>>> +
>>> + ret = pci_epc_set_bar(epc, func_no, epf_bar);
>>> + if (ret) {
>>> + dev_err(dev, "%s intf: peer SPAD BAR set failed\n",
>>> + pci_epc_interface_string(type));
>>> + return ret;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_config_sspad_bar_clear() - Clear Config + Self scratchpad BAR
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + *
>>> + * +-----------------+------->+------------------+ +-----------------+
>>> + * | BAR0 | | CONFIG REGION | | BAR0 |
>>> + * +-----------------+----+ +------------------+<-------+-----------------+
>>> + * | BAR1 | | |SCRATCHPAD REGION | | BAR1 |
>>> + * +-----------------+ +-->+------------------+<-------+-----------------+
>>> + * | BAR2 | Local Memory | BAR2 |
>>> + * +-----------------+ +-----------------+
>>> + * | BAR3 | | BAR3 |
>>> + * +-----------------+ +-----------------+
>>> + * | BAR4 | | BAR4 |
>>> + * +-----------------+ +-----------------+
>>> + * | BAR5 | | BAR5 |
>>> + * +-----------------+ +-----------------+
>>> + * EP CONTROLLER 1 EP CONTROLLER 2
>>> + *
>>> + * Clear BAR0 of EP CONTROLLER 1 which contains the HOST1's config and
>>> + * self scratchpad region (removes inbound ATU configuration). While BAR0 is
>>> + * the default self scratchpad BAR, an NTB could have other BARs for self
>>> + * scratchpad (because of reserved BARs). This function can get the exact BAR
>>> + * used for self scratchpad from epf_ntb_bar[BAR_CONFIG].
>>> + *
>>> + * Please note the self scratchpad region and config region is combined to
>>> + * a single region and mapped using the same BAR. Also note HOST2's peer
>>> + * scratchpad is HOST1's self scratchpad.
>>> + */
>>> +static void epf_ntb_config_sspad_bar_clear(struct epf_ntb_epc *ntb_epc)
>>> +{
>>> + struct pci_epf_bar *epf_bar;
>>> + enum pci_barno barno;
>>> + struct pci_epc *epc;
>>> + u8 func_no;
>>> +
>>> + epc = ntb_epc->epc;
>>> + func_no = ntb_epc->func_no;
>>> + barno = ntb_epc->epf_ntb_bar[BAR_CONFIG];
>>> + epf_bar = &ntb_epc->epf_bar[barno];
>>> + pci_epc_clear_bar(epc, func_no, epf_bar);
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_config_sspad_bar_set() - Set Config + Self scratchpad BAR
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + *
>>> + * +-----------------+------->+------------------+ +-----------------+
>>> + * | BAR0 | | CONFIG REGION | | BAR0 |
>>> + * +-----------------+----+ +------------------+<-------+-----------------+
>>> + * | BAR1 | | |SCRATCHPAD REGION | | BAR1 |
>>> + * +-----------------+ +-->+------------------+<-------+-----------------+
>>> + * | BAR2 | Local Memory | BAR2 |
>>> + * +-----------------+ +-----------------+
>>> + * | BAR3 | | BAR3 |
>>> + * +-----------------+ +-----------------+
>>> + * | BAR4 | | BAR4 |
>>> + * +-----------------+ +-----------------+
>>> + * | BAR5 | | BAR5 |
>>> + * +-----------------+ +-----------------+
>>> + * EP CONTROLLER 1 EP CONTROLLER 2
>>> + *
>>> + * Map BAR0 of EP CONTROLLER 1 which contains the HOST1's config and
>>> + * self scratchpad region. While BAR0 is the default self scratchpad BAR, an
>>> + * NTB could have other BARs for self scratchpad (because of reserved BARs).
>>> + * This function can get the exact BAR used for self scratchpad from
>>> + * epf_ntb_bar[BAR_CONFIG].
>>> + *
>>> + * Please note the self scratchpad region and config region is combined to
>>> + * a single region and mapped using the same BAR. Also note HOST2's peer
>>> + * scratchpad is HOST1's self scratchpad.
>>> + */
>>> +static int epf_ntb_config_sspad_bar_set(struct epf_ntb_epc *ntb_epc)
>>> +{
>>> + struct pci_epf_bar *epf_bar;
>>> + enum pci_barno barno;
>>> + struct epf_ntb *ntb;
>>> + struct pci_epc *epc;
>>> + struct device *dev;
>>> + u8 func_no;
>>> + int ret;
>>> +
>>> + ntb = ntb_epc->epf_ntb;
>>> + dev = &ntb->epf->dev;
>>> +
>>> + epc = ntb_epc->epc;
>>> + func_no = ntb_epc->func_no;
>>> + barno = ntb_epc->epf_ntb_bar[BAR_CONFIG];
>>> + epf_bar = &ntb_epc->epf_bar[barno];
>>> +
>>> + ret = pci_epc_set_bar(epc, func_no, epf_bar);
>>> + if (ret) {
>>> + dev_err(dev, "%s inft: Config/Status/SPAD BAR set failed\n",
>>> + pci_epc_interface_string(ntb_epc->type));
>>> + return ret;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_config_spad_bar_free() - Free the physical memory associated with
>>> + * config + scratchpad region
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + *
>>> + * +-----------------+------->+------------------+ +-----------------+
>>> + * | BAR0 | | CONFIG REGION | | BAR0 |
>>> + * +-----------------+----+ +------------------+<-------+-----------------+
>>> + * | BAR1 | | |SCRATCHPAD REGION | | BAR1 |
>>> + * +-----------------+ +-->+------------------+<-------+-----------------+
>>> + * | BAR2 | Local Memory | BAR2 |
>>> + * +-----------------+ +-----------------+
>>> + * | BAR3 | | BAR3 |
>>> + * +-----------------+ +-----------------+
>>> + * | BAR4 | | BAR4 |
>>> + * +-----------------+ +-----------------+
>>> + * | BAR5 | | BAR5 |
>>> + * +-----------------+ +-----------------+
>>> + * EP CONTROLLER 1 EP CONTROLLER 2
>>> + *
>>> + * Free the Local Memory mentioned in the above diagram. After invoking this
>>> + * function, any of config + self scratchpad region of HOST1 or peer scratchpad
>>> + * region of HOST2 should not be accessed.
>>> + */
>>> +static void epf_ntb_config_spad_bar_free(struct epf_ntb *ntb)
>>> +{
>>> + enum pci_epc_interface_type type;
>>> + struct epf_ntb_epc *ntb_epc;
>>> + enum pci_barno barno;
>>> + struct pci_epf *epf;
>>> +
>>> + epf = ntb->epf;
>>> + for (type = PRIMARY_INTERFACE; type <= SECONDARY_INTERFACE; type++) {
>>> + ntb_epc = ntb->epc[type];
>>> + barno = ntb_epc->epf_ntb_bar[BAR_CONFIG];
>>> + if (ntb_epc->reg)
>>> + pci_epf_free_space(epf, ntb_epc->reg, barno, type);
>>> + }
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_config_spad_bar_alloc() - Allocate memory for config + scratchpad
>>> + * region
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + * @type: PRIMARY interface or SECONDARY interface
>>> + *
>>> + * +-----------------+------->+------------------+ +-----------------+
>>> + * | BAR0 | | CONFIG REGION | | BAR0 |
>>> + * +-----------------+----+ +------------------+<-------+-----------------+
>>> + * | BAR1 | | |SCRATCHPAD REGION | | BAR1 |
>>> + * +-----------------+ +-->+------------------+<-------+-----------------+
>>> + * | BAR2 | Local Memory | BAR2 |
>>> + * +-----------------+ +-----------------+
>>> + * | BAR3 | | BAR3 |
>>> + * +-----------------+ +-----------------+
>>> + * | BAR4 | | BAR4 |
>>> + * +-----------------+ +-----------------+
>>> + * | BAR5 | | BAR5 |
>>> + * +-----------------+ +-----------------+
>>> + * EP CONTROLLER 1 EP CONTROLLER 2
>>> + *
>>> + * Allocate the Local Memory mentioned in the above diagram. The size of
>>> + * CONFIG REGION is sizeof(struct epf_ntb_ctrl) and size of SCRATCHPAD REGION
>>> + * is obtained from "spad-count" configfs entry.
>>> + *
>>> + * The size of both config region and scratchpad region has to be aligned,
>>> + * since the scratchpad region will also be mapped as PEER SCRATCHPAD of
>>> + * other host using a separate BAR.
>>> + */
>>> +static int epf_ntb_config_spad_bar_alloc(struct epf_ntb *ntb,
>>> + enum pci_epc_interface_type type)
>>> +{
>>> + const struct pci_epc_features *peer_epc_features, *epc_features;
>>> + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc;
>>> + size_t msix_table_size, pba_size, align;
>>> + enum pci_barno peer_barno, barno;
>>> + struct epf_ntb_ctrl *ctrl;
>>> + u32 spad_size, ctrl_size;
>>> + u64 size, peer_size;
>>> + struct pci_epf *epf;
>>> + struct device *dev;
>>> + bool msix_capable;
>>> + u32 spad_count;
>>> + void *base;
>>> +
>>> + epf = ntb->epf;
>>> + dev = &epf->dev;
>>> + ntb_epc = ntb->epc[type];
>>> +
>>> + epc_features = ntb_epc->epc_features;
>>> + barno = ntb_epc->epf_ntb_bar[BAR_CONFIG];
>>> + size = epc_features->bar_fixed_size[barno];
>>> + align = epc_features->align;
>>> +
>>> + peer_ntb_epc = ntb->epc[!type];
>>> + peer_epc_features = peer_ntb_epc->epc_features;
>>> + peer_barno = ntb_epc->epf_ntb_bar[BAR_PEER_SPAD];
>>> + peer_size = peer_epc_features->bar_fixed_size[peer_barno];
>>> +
>>> + /* Check if epc_features is populated incorrectly */
>>> + if ((!IS_ALIGNED(size, align)))
>>> + return -EINVAL;
>>> +
>>> + spad_count = ntb->spad_count;
>>> +
>>> + ctrl_size = sizeof(struct epf_ntb_ctrl);
>>> + spad_size = spad_count * 4;
>>> +
>>> + msix_capable = epc_features->msix_capable;
>>> + if (msix_capable) {
>>> + msix_table_size = PCI_MSIX_ENTRY_SIZE * ntb->db_count;
>>> + ctrl_size = ALIGN(ctrl_size, 8);
>>> + ntb_epc->msix_table_offset = ctrl_size;
>>> + ntb_epc->msix_bar = barno;
>>> + /* Align to QWORD or 8 Bytes */
>>> + pba_size = ALIGN(DIV_ROUND_UP(ntb->db_count, 8), 8);
>>> + ctrl_size = ctrl_size + msix_table_size + pba_size;
>>> + }
>>> +
>>> + if (!align) {
>>> + ctrl_size = roundup_pow_of_two(ctrl_size);
>>> + spad_size = roundup_pow_of_two(spad_size);
>>> + } else {
>>> + ctrl_size = ALIGN(ctrl_size, align);
>>> + spad_size = ALIGN(spad_size, align);
>>> + }
>>> +
>>> + if (peer_size) {
>>> + if (peer_size < spad_size)
>>> + spad_count = peer_size / 4;
>>> + spad_size = peer_size;
>>> + }
>>> +
>>> + /*
>>> + * In order to make sure SPAD offset is aligned to its size,
>>> + * expand control region size to the size of SPAD if SPAD size
>>> + * is greater than control region size.
>>> + */
>>> + if (spad_size > ctrl_size)
>>> + ctrl_size = spad_size;
>>> +
>>> + if (!size)
>>> + size = ctrl_size + spad_size;
>>> + else if (size < ctrl_size + spad_size)
>>> + return -EINVAL;
>>> +
>>> + base = pci_epf_alloc_space(epf, size, barno, align, type);
>>> + if (!base) {
>>> + dev_err(dev, "%s intf: Config/Status/SPAD alloc region fail\n",
>>> + pci_epc_interface_string(type));
>>> + return -ENOMEM;
>>> + }
>>> +
>>> + ntb_epc->reg = base;
>>> +
>>> + ctrl = ntb_epc->reg;
>>> + ctrl->spad_offset = ctrl_size;
>>> + ctrl->spad_count = spad_count;
>>> + ctrl->num_mws = ntb->num_mws;
>>> + ctrl->db_entry_size = align ? align : 4;
>>> + ntb_epc->spad_size = spad_size;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_config_spad_bar_alloc_interface() - Allocate memory for config +
>>> + * scratchpad region for each of PRIMARY and SECONDARY interface
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + *
>>> + * Wrapper for epf_ntb_config_spad_bar_alloc() which allocates memory for
>>> + * config + scratchpad region for a specific interface
>>> + */
>>> +static int epf_ntb_config_spad_bar_alloc_interface(struct epf_ntb *ntb)
>>> +{
>>> + enum pci_epc_interface_type type;
>>> + struct device *dev;
>>> + int ret;
>>> +
>>> + dev = &ntb->epf->dev;
>>> +
>>> + for (type = PRIMARY_INTERFACE; type <= SECONDARY_INTERFACE; type++) {
>>> + ret = epf_ntb_config_spad_bar_alloc(ntb, type);
>>> + if (ret) {
>>> + dev_err(dev, "%s intf: Config/SPAD BAR alloc failed\n",
>>> + pci_epc_interface_string(type));
>>> + return ret;
>>> + }
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_free_peer_mem() - Free memory allocated in peers outbound address
>>> + * space
>>> + * @ntb_epc: EPC associated with one of the HOST which holds peers outbound
>>> + * address regions
>>> + *
>>> + * +-----------------+ +---->+----------------+-----------+-----------------+
>>> + * | BAR0 | | | Doorbell 1 +-----------> MSI|X ADDRESS 1 |
>>> + * +-----------------+ | +----------------+ +-----------------+
>>> + * | BAR1 | | | Doorbell 2 +---------+ | |
>>> + * +-----------------+----+ +----------------+ | | |
>>> + * | BAR2 | | Doorbell 3 +-------+ | +-----------------+
>>> + * +-----------------+----+ +----------------+ | +-> MSI|X ADDRESS 2 |
>>> + * | BAR3 | | | Doorbell 4 +-----+ | +-----------------+
>>> + * +-----------------+ | |----------------+ | | | |
>>> + * | BAR4 | | | | | | +-----------------+
>>> + * +-----------------+ | | MW1 +---+ | +-->+ MSI|X ADDRESS 3||
>>> + * | BAR5 | | | | | | +-----------------+
>>> + * +-----------------+ +---->-----------------+ | | | |
>>> + * EP CONTROLLER 1 | | | | +-----------------+
>>> + * | | | +---->+ MSI|X ADDRESS 4 |
>>> + * +----------------+ | +-----------------+
>>> + * (A) EP CONTROLLER 2 | | |
>>> + * (OB SPACE) | | |
>>> + * +-------> MW1 |
>>> + * | |
>>> + * | |
>>> + * (B) +-----------------+
>>> + * | |
>>> + * | |
>>> + * | |
>>> + * | |
>>> + * | |
>>> + * +-----------------+
>>> + * PCI Address Space
>>> + * (Managed by HOST2)
>>> + *
>>> + * Free memory allocated in EP CONTROLLER 2 (OB SPACE) in the above diagram.
>>> + * It'll free Doorbell 1, Doorbell 2, Doorbell 3, Doorbell 4, MW1 (and MW2, MW3,
>>> + * MW4).
>>> + */
>>> +static void epf_ntb_free_peer_mem(struct epf_ntb_epc *ntb_epc)
>>> +{
>>> + struct pci_epf_bar *epf_bar;
>>> + void __iomem *mw_addr;
>>> + phys_addr_t phys_addr;
>>> + enum epf_ntb_bar bar;
>>> + enum pci_barno barno;
>>> + struct pci_epc *epc;
>>> + size_t size;
>>> +
>>> + epc = ntb_epc->epc;
>>> +
>>> + for (bar = BAR_DB_MW1; bar < BAR_MW4; bar++) {
>>> + barno = ntb_epc->epf_ntb_bar[bar];
>>> + mw_addr = ntb_epc->mw_addr[barno];
>>> + epf_bar = &ntb_epc->epf_bar[barno];
>>> + phys_addr = epf_bar->phys_addr;
>>> + size = epf_bar->size;
>>> + if (mw_addr) {
>>> + pci_epc_mem_free_addr(epc, phys_addr, mw_addr, size);
>>> + ntb_epc->mw_addr[barno] = NULL;
>>> + }
>>> + }
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_db_mw_bar_clear() - Clear doorbell and memory BAR
>>> + * @ntb_epc: EPC associated with one of the HOST which holds peer's outbound
>>> + * address
>>> + *
>>> + * +-----------------+ +---->+----------------+-----------+-----------------+
>>> + * | BAR0 | | | Doorbell 1 +-----------> MSI|X ADDRESS 1 |
>>> + * +-----------------+ | +----------------+ +-----------------+
>>> + * | BAR1 | | | Doorbell 2 +---------+ | |
>>> + * +-----------------+----+ +----------------+ | | |
>>> + * | BAR2 | | Doorbell 3 +-------+ | +-----------------+
>>> + * +-----------------+----+ +----------------+ | +-> MSI|X ADDRESS 2 |
>>> + * | BAR3 | | | Doorbell 4 +-----+ | +-----------------+
>>> + * +-----------------+ | |----------------+ | | | |
>>> + * | BAR4 | | | | | | +-----------------+
>>> + * +-----------------+ | | MW1 +---+ | +-->+ MSI|X ADDRESS 3||
>>> + * | BAR5 | | | | | | +-----------------+
>>> + * +-----------------+ +---->-----------------+ | | | |
>>> + * EP CONTROLLER 1 | | | | +-----------------+
>>> + * | | | +---->+ MSI|X ADDRESS 4 |
>>> + * +----------------+ | +-----------------+
>>> + * (A) EP CONTROLLER 2 | | |
>>> + * (OB SPACE) | | |
>>> + * +-------> MW1 |
>>> + * | |
>>> + * | |
>>> + * (B) +-----------------+
>>> + * | |
>>> + * | |
>>> + * | |
>>> + * | |
>>> + * | |
>>> + * +-----------------+
>>> + * PCI Address Space
>>> + * (Managed by HOST2)
>>> + *
>>> + * Clear doorbell and memory BARs (remove inbound ATU configuration). In the above
>>> + * diagram it clears BAR2 TO BAR5 of EP CONTROLLER 1 (Doorbell BAR, MW1 BAR, MW2
>>> + * BAR, MW3 BAR and MW4 BAR).
>>> + */
>>> +static void epf_ntb_db_mw_bar_clear(struct epf_ntb_epc *ntb_epc)
>>> +{
>>> + struct pci_epf_bar *epf_bar;
>>> + enum epf_ntb_bar bar;
>>> + enum pci_barno barno;
>>> + struct pci_epc *epc;
>>> + u8 func_no;
>>> +
>>> + epc = ntb_epc->epc;
>>> +
>>> + func_no = ntb_epc->func_no;
>>> +
>>> + for (bar = BAR_DB_MW1; bar < BAR_MW4; bar++) {
>>> + barno = ntb_epc->epf_ntb_bar[bar];
>>> + epf_bar = &ntb_epc->epf_bar[barno];
>>> + pci_epc_clear_bar(epc, func_no, epf_bar);
>>> + }
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_db_mw_bar_cleanup() - Clear doorbell/memory BAR and free memory
>>> + * allocated in peers outbound address space
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + * @type: PRIMARY interface or SECONDARY interface
>>> + *
>>> + * Wrapper for epf_ntb_db_mw_bar_clear() to clear HOST1's BAR and
>>> + * epf_ntb_free_peer_mem() which frees up HOST2 outbound memory.
>>> + */
>>> +static void epf_ntb_db_mw_bar_cleanup(struct epf_ntb *ntb,
>>> + enum pci_epc_interface_type type)
>>> +{
>>> + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc;
>>> +
>>> + ntb_epc = ntb->epc[type];
>>> + peer_ntb_epc = ntb->epc[!type];
>>> +
>>> + epf_ntb_db_mw_bar_clear(ntb_epc);
>>> + epf_ntb_free_peer_mem(peer_ntb_epc);
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capaiblity
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + * @type: PRIMARY interface or SECONDARY interface
>>> + *
>>> + * Configure MSI/MSI-X capability for each interface with number of
>>> + * interrupts equal to "db_count" configfs entry.
>>> + */
>>> +static int epf_ntb_configure_interrupt(struct epf_ntb *ntb,
>>> + enum pci_epc_interface_type type)
>>> +{
>>> + const struct pci_epc_features *epc_features;
>>> + bool msix_capable, msi_capable;
>>> + struct epf_ntb_epc *ntb_epc;
>>> + struct pci_epc *epc;
>>> + struct device *dev;
>>> + u32 db_count;
>>> + u8 func_no;
>>> + int ret;
>>> +
>>> + ntb_epc = ntb->epc[type];
>>> + dev = &ntb->epf->dev;
>>> +
>>> + epc_features = ntb_epc->epc_features;
>>> + msix_capable = epc_features->msix_capable;
>>> + msi_capable = epc_features->msi_capable;
>>> +
>>> + if (!(msix_capable || msi_capable)) {
>>> + dev_err(dev, "MSI or MSI-X is required for doorbell\n");
>>> + return -EINVAL;
>>> + }
>>> +
>>> + func_no = ntb_epc->func_no;
>>> +
>>> + db_count = ntb->db_count;
>>> + if (db_count > MAX_DB_COUNT) {
>>> + dev_err(dev, "DB count cannot be more than %d\n", MAX_DB_COUNT);
>>> + return -EINVAL;
>>> + }
>>> +
>>> + ntb->db_count = db_count;
>>> + epc = ntb_epc->epc;
>>> +
>>> + if (msi_capable) {
>>> + ret = pci_epc_set_msi(epc, func_no, db_count);
>>> + if (ret) {
>>> + dev_err(dev, "%s intf: MSI configuration failed\n",
>>> + pci_epc_interface_string(type));
>>> + return ret;
>>> + }
>>> + }
>>> +
>>> + if (msix_capable) {
>>> + ret = pci_epc_set_msix(epc, func_no, db_count,
>>> + ntb_epc->msix_bar,
>>> + ntb_epc->msix_table_offset);
>>> + if (ret) {
>>> + dev_err(dev, "MSI configuration failed\n");
>>> + return ret;
>>> + }
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_alloc_peer_mem() - Allocate memory in peer's outbound address space
>>> + * @ntb_epc: EPC associated with one of the HOST whose BAR holds peer's outbound
>>> + * address
>>> + * @bar: BAR of @ntb_epc in for which memory has to be allocated (could be
>>> + * BAR_DB_MW1, BAR_MW2, BAR_MW3, BAR_MW4)
>>> + * @peer_ntb_epc: EPC associated with HOST whose outbound address space is
>>> + * used by @ntb_epc
>>> + * @size: Size of the address region that has to be allocated in peers OB SPACE
>>> + *
>>> + *
>>> + * +-----------------+ +---->+----------------+-----------+-----------------+
>>> + * | BAR0 | | | Doorbell 1 +-----------> MSI|X ADDRESS 1 |
>>> + * +-----------------+ | +----------------+ +-----------------+
>>> + * | BAR1 | | | Doorbell 2 +---------+ | |
>>> + * +-----------------+----+ +----------------+ | | |
>>> + * | BAR2 | | Doorbell 3 +-------+ | +-----------------+
>>> + * +-----------------+----+ +----------------+ | +-> MSI|X ADDRESS 2 |
>>> + * | BAR3 | | | Doorbell 4 +-----+ | +-----------------+
>>> + * +-----------------+ | |----------------+ | | | |
>>> + * | BAR4 | | | | | | +-----------------+
>>> + * +-----------------+ | | MW1 +---+ | +-->+ MSI|X ADDRESS 3||
>>> + * | BAR5 | | | | | | +-----------------+
>>> + * +-----------------+ +---->-----------------+ | | | |
>>> + * EP CONTROLLER 1 | | | | +-----------------+
>>> + * | | | +---->+ MSI|X ADDRESS 4 |
>>> + * +----------------+ | +-----------------+
>>> + * (A) EP CONTROLLER 2 | | |
>>> + * (OB SPACE) | | |
>>> + * +-------> MW1 |
>>> + * | |
>>> + * | |
>>> + * (B) +-----------------+
>>> + * | |
>>> + * | |
>>> + * | |
>>> + * | |
>>> + * | |
>>> + * +-----------------+
>>> + * PCI Address Space
>>> + * (Managed by HOST2)
>>> + *
>>> + * Allocate memory in OB space of EP CONTROLLER 2 in the above diagram. Allocate
>>> + * for Doorbell 1, Doorbell 2, Doorbell 3, Doorbell 4, MW1 (and MW2, MW3, MW4).
>>> + */
>>> +static int epf_ntb_alloc_peer_mem(struct device *dev,
>>> + struct epf_ntb_epc *ntb_epc,
>>> + enum epf_ntb_bar bar,
>>> + struct epf_ntb_epc *peer_ntb_epc,
>>> + size_t size)
>>> +{
>>> + const struct pci_epc_features *epc_features;
>>> + struct pci_epf_bar *epf_bar;
>>> + struct pci_epc *peer_epc;
>>> + phys_addr_t phys_addr;
>>> + void __iomem *mw_addr;
>>> + enum pci_barno barno;
>>> + size_t align;
>>> +
>>> + epc_features = ntb_epc->epc_features;
>>> + align = epc_features->align;
>>> +
>>> + if (size < 128)
>>> + size = 128;
>>> +
>>> + if (align)
>>> + size = ALIGN(size, align);
>>> + else
>>> + size = roundup_pow_of_two(size);
>>> +
>>> + peer_epc = peer_ntb_epc->epc;
>>> + mw_addr = pci_epc_mem_alloc_addr(peer_epc, &phys_addr, size);
>>> + if (!mw_addr) {
>>> + dev_err(dev, "%s intf: Failed to allocate OB address\n",
>>> + pci_epc_interface_string(peer_ntb_epc->type));
>>> + return -ENOMEM;
>>> + }
>>> +
>>> + barno = ntb_epc->epf_ntb_bar[bar];
>>> + epf_bar = &ntb_epc->epf_bar[barno];
>>> + ntb_epc->mw_addr[barno] = mw_addr;
>>> +
>>> + epf_bar->phys_addr = phys_addr;
>>> + epf_bar->size = size;
>>> + epf_bar->barno = barno;
>>> + epf_bar->flags = PCI_BASE_ADDRESS_MEM_TYPE_32;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_db_mw_bar_init() - Configure Doorbell and Memory window BARs
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + * @type: PRIMARY interface or SECONDARY interface
>>> + *
>>> + * Wrapper for epf_ntb_alloc_peer_mem() and pci_epc_set_bar() that allocates
>>> + * memory in OB address space of HOST2 and configures BAR of HOST1
>>> + */
>>> +static int epf_ntb_db_mw_bar_init(struct epf_ntb *ntb,
>>> + enum pci_epc_interface_type type)
>>> +{
>>> + const struct pci_epc_features *epc_features;
>>> + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc;
>>> + struct pci_epf_bar *epf_bar;
>>> + struct epf_ntb_ctrl *ctrl;
>>> + u32 num_mws, db_count;
>>> + enum epf_ntb_bar bar;
>>> + enum pci_barno barno;
>>> + struct pci_epc *epc;
>>> + struct device *dev;
>>> + size_t align;
>>> + int ret, i;
>>> + u8 func_no;
>>> + u64 size;
>>> +
>>> + ntb_epc = ntb->epc[type];
>>> + peer_ntb_epc = ntb->epc[!type];
>>> +
>>> + dev = &ntb->epf->dev;
>>> + epc_features = ntb_epc->epc_features;
>>> + align = epc_features->align;
>>> + func_no = ntb_epc->func_no;
>>> + epc = ntb_epc->epc;
>>> + num_mws = ntb->num_mws;
>>> + db_count = ntb->db_count;
>>> +
>>> + for (bar = BAR_DB_MW1, i = 0; i < num_mws; bar++, i++) {
>>> + if (bar == BAR_DB_MW1) {
>>> + align = align ? align : 4;
>>> + size = db_count * align;
>>> + size = ALIGN(size, ntb->mws_size[i]);
>>> + ctrl = ntb_epc->reg;
>>> + ctrl->mw1_offset = size;
>>> + size += ntb->mws_size[i];
>>> + } else {
>>> + size = ntb->mws_size[i];
>>> + }
>>> +
>>> + ret = epf_ntb_alloc_peer_mem(dev, ntb_epc, bar,
>>> + peer_ntb_epc, size);
>>> + if (ret) {
>>> + dev_err(dev, "%s intf: DoorBell mem alloc failed\n",
>>> + pci_epc_interface_string(type));
>>> + goto err_alloc_peer_mem;
>>> + }
>>> +
>>> + barno = ntb_epc->epf_ntb_bar[bar];
>>> + epf_bar = &ntb_epc->epf_bar[barno];
>>> +
>>> + ret = pci_epc_set_bar(epc, func_no, epf_bar);
>>> + if (ret) {
>>> + dev_err(dev, "%s intf: DoorBell BAR set failed\n",
>>> + pci_epc_interface_string(type));
>>> + goto err_alloc_peer_mem;
>>> + }
>>> + }
>>> +
>>> + return 0;
>>> +
>>> +err_alloc_peer_mem:
>>> + epf_ntb_db_mw_bar_cleanup(ntb, type);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_epc_destroy_interface() - Cleanup NTB EPC interface
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + * @type: PRIMARY interface or SECONDARY interface
>>> + *
>>> + * Unbind NTB function device from EPC and relinquish reference to pci_epc
>>> + * for each of the interface.
>>> + */
>>> +static void epf_ntb_epc_destroy_interface(struct epf_ntb *ntb,
>>> + enum pci_epc_interface_type type)
>>> +{
>>> + struct epf_ntb_epc *ntb_epc;
>>> + struct pci_epc *epc;
>>> + struct pci_epf *epf;
>>> +
>>> + if (type < 0)
>>> + return;
>>> +
>>> + epf = ntb->epf;
>>> + ntb_epc = ntb->epc[type];
>>> + if (!ntb_epc)
>>> + return;
>>> + epc = ntb_epc->epc;
>>> + pci_epc_remove_epf(epc, epf, type);
>>> + pci_epc_put(epc);
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_epc_destroy() - Cleanup NTB EPC interface
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + *
>>> + * Wrapper for epf_ntb_epc_destroy_interface() to cleanup all the NTB interfaces
>>> + */
>>> +static void epf_ntb_epc_destroy(struct epf_ntb *ntb)
>>> +{
>>> + enum pci_epc_interface_type type;
>>> +
>>> + for (type = PRIMARY_INTERFACE; type <= SECONDARY_INTERFACE; type++)
>>> + epf_ntb_epc_destroy_interface(ntb, type);
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_epc_create_interface() - Create and initialize NTB EPC interface
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + * @epc: struct pci_epc to which a particular NTB interface should be associated
>>> + * @type: PRIMARY interface or SECONDARY interface
>>> + *
>>> + * Allocate memory for NTB EPC interface and initialize it.
>>> + */
>>> +static int epf_ntb_epc_create_interface(struct epf_ntb *ntb,
>>> + struct pci_epc *epc,
>>> + enum pci_epc_interface_type type)
>>> +{
>>> + const struct pci_epc_features *epc_features;
>>> + struct pci_epf_bar *epf_bar;
>>> + struct epf_ntb_epc *ntb_epc;
>>> + struct pci_epf *epf;
>>> + struct device *dev;
>>> + u8 func_no;
>>> +
>>> + dev = &ntb->epf->dev;
>>> +
>>> + ntb_epc = devm_kzalloc(dev, sizeof(*ntb_epc), GFP_KERNEL);
>>> + if (!ntb_epc)
>>> + return -ENOMEM;
>>> +
>>> + epf = ntb->epf;
>>> + if (type == PRIMARY_INTERFACE) {
>>> + func_no = epf->func_no;
>>> + epf_bar = epf->bar;
>>> + } else {
>>> + func_no = epf->sec_epc_func_no;
>>> + epf_bar = epf->sec_epc_bar;
>>> + }
>>> +
>>> + ntb_epc->linkup = false;
>>> + ntb_epc->epc = epc;
>>> + ntb_epc->func_no = func_no;
>>> + ntb_epc->type = type;
>>> + ntb_epc->epf_bar = epf_bar;
>>> + ntb_epc->epf_ntb = ntb;
>>> +
>>> + epc_features = pci_epc_get_features(epc, func_no);
>>> + if (!epc_features)
>>> + return -EINVAL;
>>> + ntb_epc->epc_features = epc_features;
>>> +
>>> + ntb->epc[type] = ntb_epc;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_epc_create() - Create and initialize NTB EPC interface
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + *
>>> + * Get a reference to EPC device and bind NTB function device to that EPC
>>> + * for each of the interface. It is also a wrapper to
>>> + * epf_ntb_epc_create_interface() to allocate memory for NTB EPC interface
>>> + * and initialize it
>>> + */
>>> +static int epf_ntb_epc_create(struct epf_ntb *ntb)
>>> +{
>>> + struct pci_epf *epf;
>>> + struct device *dev;
>>> + int ret;
>>> +
>>> + epf = ntb->epf;
>>> + dev = &epf->dev;
>>> +
>>> + ret = epf_ntb_epc_create_interface(ntb, epf->epc, PRIMARY_INTERFACE);
>>> + if (ret) {
>>> + dev_err(dev, "PRIMARY intf: Fail to create NTB EPC\n");
>>> + return ret;
>>> + }
>>> +
>>> + ret = epf_ntb_epc_create_interface(ntb, epf->sec_epc,
>>> + SECONDARY_INTERFACE);
>>> + if (ret) {
>>> + dev_err(dev, "SECONDARY intf: Fail to create NTB EPC\n");
>>> + goto err_epc_create;
>>> + }
>>> +
>>> + return 0;
>>> +
>>> +err_epc_create:
>>> + epf_ntb_epc_destroy_interface(ntb, PRIMARY_INTERFACE);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_init_epc_bar_interface() - Identify BARs to be used for each of
>>> + * the NTB constructs (scratchpad region, doorbell, memorywindow)
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + * @type: PRIMARY interface or SECONDARY interface
>>> + *
>>> + * Identify the free BARs to be used for each of BAR_CONFIG, BAR_PEER_SPAD,
>>> + * BAR_DB_MW1, BAR_MW2, BAR_MW3 and BAR_MW4.
>>> + */
>>> +static int epf_ntb_init_epc_bar_interface(struct epf_ntb *ntb,
>>> + enum pci_epc_interface_type type)
>>> +{
>>> + const struct pci_epc_features *epc_features;
>>> + struct epf_ntb_epc *ntb_epc;
>>> + enum pci_barno barno;
>>> + enum epf_ntb_bar bar;
>>> + struct device *dev;
>>> + u32 num_mws;
>>> + int i;
>>> +
>>> + barno = BAR_0;
>>> + ntb_epc = ntb->epc[type];
>>> + num_mws = ntb->num_mws;
>>> + dev = &ntb->epf->dev;
>>> + epc_features = ntb_epc->epc_features;
>>> +
>>> + /* These are required BARs which are mandatory for NTB functionality */
>>> + for (bar = BAR_CONFIG; bar <= BAR_DB_MW1; bar++, barno++) {
>>> + barno = pci_epc_get_next_free_bar(epc_features, barno);
>>> + if (barno < 0) {
>>> + dev_err(dev, "%s intf: Fail to get NTB function BAR\n",
>>> + pci_epc_interface_string(type));
>>> + return barno;
>>> + }
>>> + ntb_epc->epf_ntb_bar[bar] = barno;
>>> + }
>>> +
>>> + /* These are optional BARs which don't impact NTB functionality */
>>> + for (bar = BAR_MW2, i = 1; i < num_mws; bar++, barno++, i++) {
>>> + barno = pci_epc_get_next_free_bar(epc_features, barno);
>>> + if (barno < 0) {
>>> + ntb->num_mws = i;
>>> + dev_dbg(dev, "BAR not available for > MW%d\n", i + 1);
>>> + }
>>> + ntb_epc->epf_ntb_bar[bar] = barno;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_init_epc_bar() - Identify BARs to be used for each of the NTB
>>> + * constructs (scratchpad region, doorbell, memorywindow)
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + * @type: PRIMARY interface or SECONDARY interface
>>> + *
>>> + * Wrapper to epf_ntb_init_epc_bar_interface() to identify the free BARs
>>> + * to be used for each of BAR_CONFIG, BAR_PEER_SPAD, BAR_DB_MW1, BAR_MW2,
>>> + * BAR_MW3 and BAR_MW4 for all the interfaces.
>>> + */
>>> +static int epf_ntb_init_epc_bar(struct epf_ntb *ntb)
>>> +{
>>> + enum pci_epc_interface_type type;
>>> + struct device *dev;
>>> + int ret;
>>> +
>>> + dev = &ntb->epf->dev;
>>> + for (type = PRIMARY_INTERFACE; type <= SECONDARY_INTERFACE; type++) {
>>> + ret = epf_ntb_init_epc_bar_interface(ntb, type);
>>> + if (ret) {
>>> + dev_err(dev, "Fail to init EPC bar for %s interface\n",
>>> + pci_epc_interface_string(type));
>>> + return ret;
>>> + }
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_epc_init_interface() - Initialize NTB interface
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + * @type: PRIMARY interface or SECONDARY interface
>>> + *
>>> + * Wrapper to initialize a particular EPC interface and start the workqueue
>>> + * to check for commands from host. This function will write to the
>>> + * EP controller HW for configuring it.
>>> + */
>>> +static int epf_ntb_epc_init_interface(struct epf_ntb *ntb,
>>> + enum pci_epc_interface_type type)
>>> +{
>>> + struct epf_ntb_epc *ntb_epc;
>>> + struct pci_epc *epc;
>>> + struct pci_epf *epf;
>>> + struct device *dev;
>>> + u8 func_no;
>>> + int ret;
>>> +
>>> + ntb_epc = ntb->epc[type];
>>> + epf = ntb->epf;
>>> + dev = &epf->dev;
>>> + epc = ntb_epc->epc;
>>> + func_no = ntb_epc->func_no;
>>> +
>>> + ret = epf_ntb_config_sspad_bar_set(ntb->epc[type]);
>>> + if (ret) {
>>> + dev_err(dev, "%s intf: Config/self SPAD BAR init failed\n",
>>> + pci_epc_interface_string(type));
>>> + return ret;
>>> + }
>>> +
>>> + ret = epf_ntb_peer_spad_bar_set(ntb, type);
>>> + if (ret) {
>>> + dev_err(dev, "%s intf: Peer SPAD BAR init failed\n",
>>> + pci_epc_interface_string(type));
>>> + goto err_peer_spad_bar_init;
>>> + }
>>> +
>>> + ret = epf_ntb_configure_interrupt(ntb, type);
>>> + if (ret) {
>>> + dev_err(dev, "%s intf: Interrupt configuration failed\n",
>>> + pci_epc_interface_string(type));
>>> + goto err_peer_spad_bar_init;
>>> + }
>>> +
>>> + ret = epf_ntb_db_mw_bar_init(ntb, type);
>>> + if (ret) {
>>> + dev_err(dev, "%s intf: DB/MW BAR init failed\n",
>>> + pci_epc_interface_string(type));
>>> + goto err_db_mw_bar_init;
>>> + }
>>> +
>>> + ret = pci_epc_write_header(epc, func_no, epf->header);
>>> + if (ret) {
>>> + dev_err(dev, "%s intf: Configuration header write failed\n",
>>> + pci_epc_interface_string(type));
>>> + goto err_write_header;
>>> + }
>>> +
>>> + INIT_DELAYED_WORK(&ntb->epc[type]->cmd_handler, epf_ntb_cmd_handler);
>>> + queue_work(kpcintb_workqueue, &ntb->epc[type]->cmd_handler.work);
>>> +
>>> + return 0;
>>> +
>>> +err_write_header:
>>> + epf_ntb_db_mw_bar_cleanup(ntb, type);
>>> +
>>> +err_db_mw_bar_init:
>>> + epf_ntb_peer_spad_bar_clear(ntb->epc[type]);
>>> +
>>> +err_peer_spad_bar_init:
>>> + epf_ntb_config_sspad_bar_clear(ntb->epc[type]);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_epc_cleanup_interface() - Cleanup NTB interface
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + * @type: PRIMARY interface or SECONDARY interface
>>> + *
>>> + * Wrapper to cleanup a particular NTB interface.
>>> + */
>>> +static void epf_ntb_epc_cleanup_interface(struct epf_ntb *ntb,
>>> + enum pci_epc_interface_type type)
>>> +{
>>> + struct epf_ntb_epc *ntb_epc;
>>> +
>>> + if (type < 0)
>>> + return;
>>> +
>>> + ntb_epc = ntb->epc[type];
>>> + cancel_delayed_work(&ntb_epc->cmd_handler);
>>> + epf_ntb_db_mw_bar_cleanup(ntb, type);
>>> + epf_ntb_peer_spad_bar_clear(ntb_epc);
>>> + epf_ntb_config_sspad_bar_clear(ntb_epc);
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_epc_cleanup() - Cleanup all NTB interfaces
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + *
>>> + * Wrapper to cleanup all NTB interfaces.
>>> + */
>>> +static void epf_ntb_epc_cleanup(struct epf_ntb *ntb)
>>> +{
>>> + enum pci_epc_interface_type type;
>>> +
>>> + for (type = PRIMARY_INTERFACE; type <= SECONDARY_INTERFACE; type++)
>>> + epf_ntb_epc_cleanup_interface(ntb, type);
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_epc_init() - Initialize all NTB interfaces
>>> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>>> + *
>>> + * Wrapper to initialize all NTB interface and start the workqueue
>>> + * to check for commands from host.
>>> + */
>>> +static int epf_ntb_epc_init(struct epf_ntb *ntb)
>>> +{
>>> + enum pci_epc_interface_type type;
>>> + struct device *dev;
>>> + int ret;
>>> +
>>> + dev = &ntb->epf->dev;
>>> +
>>> + for (type = PRIMARY_INTERFACE; type <= SECONDARY_INTERFACE; type++) {
>>> + ret = epf_ntb_epc_init_interface(ntb, type);
>>> + if (ret) {
>>> + dev_err(dev, "%s intf: Failed to initialize\n",
>>> + pci_epc_interface_string(type));
>>> + goto err_init_type;
>>> + }
>>> + }
>>> +
>>> + return 0;
>>> +
>>> +err_init_type:
>>> + epf_ntb_epc_cleanup_interface(ntb, type - 1);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_bind() - Initialize endpoint controller to provide NTB functionality
>>> + * @epf: NTB endpoint function device
>>> + *
>>> + * Initialize both the endpoint controllers associated with NTB function device.
>>> + * Invoked when a primary interface or secondary interface is bound to EPC
>>> + * device. This function will succeed only when EPC is bound to both the
>>> + * interfaces.
>>> + */
>>> +static int epf_ntb_bind(struct pci_epf *epf)
>>> +{
>>> + struct epf_ntb *ntb = epf_get_drvdata(epf);
>>> + struct device *dev = &epf->dev;
>>> + int ret;
>>> +
>>> + if (!epf->epc) {
>>> + dev_dbg(dev, "PRIMARY EPC interface not yet bound\n");
>>> + return 0;
>>> + }
>>> +
>>> + if (!epf->sec_epc) {
>>> + dev_dbg(dev, "SECONDARY EPC interface not yet bound\n");
>>> + return 0;
>>> + }
>>> +
>>> + ret = epf_ntb_epc_create(ntb);
>>> + if (ret) {
>>> + dev_err(dev, "Failed to create NTB EPC\n");
>>> + return ret;
>>> + }
>>> +
>>> + ret = epf_ntb_init_epc_bar(ntb);
>>> + if (ret) {
>>> + dev_err(dev, "Failed to create NTB EPC\n");
>>> + goto err_bar_init;
>>> + }
>>> +
>>> + ret = epf_ntb_config_spad_bar_alloc_interface(ntb);
>>> + if (ret) {
>>> + dev_err(dev, "Failed to allocate BAR memory\n");
>>> + goto err_bar_alloc;
>>> + }
>>> +
>>> + ret = epf_ntb_epc_init(ntb);
>>> + if (ret) {
>>> + dev_err(dev, "Failed to initialize EPC\n");
>>> + goto err_bar_alloc;
>>> + }
>>> +
>>> + epf_set_drvdata(epf, ntb);
>>> +
>>> + return 0;
>>> +
>>> +err_bar_alloc:
>>> + epf_ntb_config_spad_bar_free(ntb);
>>> +
>>> +err_bar_init:
>>> + epf_ntb_epc_destroy(ntb);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_unbind() - Cleanup the initialization from epf_ntb_bind()
>>> + * @epf: NTB endpoint function device
>>> + *
>>> + * Cleanup the initialization from epf_ntb_bind()
>>> + */
>>> +static void epf_ntb_unbind(struct pci_epf *epf)
>>> +{
>>> + struct epf_ntb *ntb = epf_get_drvdata(epf);
>>> +
>>> + epf_ntb_epc_cleanup(ntb);
>>> + epf_ntb_config_spad_bar_free(ntb);
>>> + epf_ntb_epc_destroy(ntb);
>>> +}
>>> +
>>> +#define EPF_NTB_R(_name) \
>>> +static ssize_t epf_ntb_##_name##_show(struct config_item *item, \
>>> + char *page) \
>>> +{ \
>>> + struct config_group *group = to_config_group(item); \
>>> + struct epf_ntb *ntb = to_epf_ntb(group); \
>>> + \
>>> + return sprintf(page, "%d\n", ntb->_name); \
>>> +}
>>> +
>>> +#define EPF_NTB_W(_name) \
>>> +static ssize_t epf_ntb_##_name##_store(struct config_item *item, \
>>> + const char *page, size_t len) \
>>> +{ \
>>> + struct config_group *group = to_config_group(item); \
>>> + struct epf_ntb *ntb = to_epf_ntb(group); \
>>> + u32 val; \
>>> + int ret; \
>>> + \
>>> + ret = kstrtou32(page, 0, &val); \
>>> + if (ret) \
>>> + return ret; \
>>> + \
>>> + ntb->_name = val; \
>>> + \
>>> + return len; \
>>> +}
>>> +
>>> +#define EPF_NTB_MW_R(_name) \
>>> +static ssize_t epf_ntb_##_name##_show(struct config_item *item, \
>>> + char *page) \
>>> +{ \
>>> + struct config_group *group = to_config_group(item); \
>>> + struct epf_ntb *ntb = to_epf_ntb(group); \
>>> + int win_no; \
>>> + \
>>> + sscanf(#_name, "mw%d", &win_no); \
>>> + \
>>> + return sprintf(page, "%lld\n", ntb->mws_size[win_no - 1]); \
>>> +}
>>> +
>>> +#define EPF_NTB_MW_W(_name) \
>>> +static ssize_t epf_ntb_##_name##_store(struct config_item *item, \
>>> + const char *page, size_t len) \
>>> +{ \
>>> + struct config_group *group = to_config_group(item); \
>>> + struct epf_ntb *ntb = to_epf_ntb(group); \
>>> + struct device *dev = &ntb->epf->dev; \
>>> + int win_no; \
>>> + u64 val; \
>>> + int ret; \
>>> + \
>>> + ret = kstrtou64(page, 0, &val); \
>>> + if (ret) \
>>> + return ret; \
>>> + \
>>> + if (sscanf(#_name, "mw%d", &win_no) != 1) \
>>> + return -EINVAL; \
>>> + \
>>> + if (ntb->num_mws < win_no) { \
>>> + dev_err(dev, "Invalid num_nws: %d value\n", ntb->num_mws); \
>>> + return -EINVAL; \
>>> + } \
>>> + \
>>> + ntb->mws_size[win_no - 1] = val; \
>>> + \
>>> + return len; \
>>> +}
>>> +
>>> +static ssize_t epf_ntb_num_mws_store(struct config_item *item,
>>> + const char *page, size_t len)
>>> +{
>>> + struct config_group *group = to_config_group(item);
>>> + struct epf_ntb *ntb = to_epf_ntb(group);
>>> + u32 val;
>>> + int ret;
>>> +
>>> + ret = kstrtou32(page, 0, &val);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + if (val > MAX_MW)
>>> + return -EINVAL;
>>> +
>>> + ntb->num_mws = val;
>>> +
>>> + return len;
>>> +}
>>> +
>>> +EPF_NTB_R(spad_count)
>>> +EPF_NTB_W(spad_count)
>>> +EPF_NTB_R(db_count)
>>> +EPF_NTB_W(db_count)
>>> +EPF_NTB_R(num_mws)
>>> +EPF_NTB_MW_R(mw1)
>>> +EPF_NTB_MW_W(mw1)
>>> +EPF_NTB_MW_R(mw2)
>>> +EPF_NTB_MW_W(mw2)
>>> +EPF_NTB_MW_R(mw3)
>>> +EPF_NTB_MW_W(mw3)
>>> +EPF_NTB_MW_R(mw4)
>>> +EPF_NTB_MW_W(mw4)
>>> +
>>> +CONFIGFS_ATTR(epf_ntb_, spad_count);
>>> +CONFIGFS_ATTR(epf_ntb_, db_count);
>>> +CONFIGFS_ATTR(epf_ntb_, num_mws);
>>> +CONFIGFS_ATTR(epf_ntb_, mw1);
>>> +CONFIGFS_ATTR(epf_ntb_, mw2);
>>> +CONFIGFS_ATTR(epf_ntb_, mw3);
>>> +CONFIGFS_ATTR(epf_ntb_, mw4);
>>> +
>>> +static struct configfs_attribute *epf_ntb_attrs[] = {
>>> + &epf_ntb_attr_spad_count,
>>> + &epf_ntb_attr_db_count,
>>> + &epf_ntb_attr_num_mws,
>>> + &epf_ntb_attr_mw1,
>>> + &epf_ntb_attr_mw2,
>>> + &epf_ntb_attr_mw3,
>>> + &epf_ntb_attr_mw4,
>>> + NULL,
>>> +};
>>> +
>>> +static const struct config_item_type ntb_group_type = {
>>> + .ct_attrs = epf_ntb_attrs,
>>> + .ct_owner = THIS_MODULE,
>>> +};
>>> +
>>> +/**
>>> + * epf_ntb_add_cfs() - Add configfs directory specific to NTB
>>> + * @epf: NTB endpoint function device
>>> + *
>>> + * Add configfs directory specific to NTB. This directory will hold
>>> + * NTB specific properties like db_count, spad_count, num_mws etc.,
>>> + */
>>> +static struct config_group *epf_ntb_add_cfs(struct pci_epf *epf,
>>> + struct config_group *group)
>>> +{
>>> + struct epf_ntb *ntb = epf_get_drvdata(epf);
>>> + struct config_group *ntb_group = &ntb->group;
>>> + struct device *dev = &epf->dev;
>>> +
>>> + config_group_init_type_name(ntb_group, dev_name(dev), &ntb_group_type);
>>> +
>>> + return ntb_group;
>>> +}
>>> +
>>> +/**
>>> + * epf_ntb_probe() - Probe NTB function driver
>>> + * @epf: NTB endpoint function device
>>> + *
>>> + * Probe NTB function driver when endpoint function bus detects a NTB
>>> + * endpoint function.
>>> + */
>>> +static int epf_ntb_probe(struct pci_epf *epf)
>>> +{
>>> + struct epf_ntb *ntb;
>>> + struct device *dev;
>>> +
>>> + dev = &epf->dev;
>>> +
>>> + ntb = devm_kzalloc(dev, sizeof(*ntb), GFP_KERNEL);
>>> + if (!ntb)
>>> + return -ENOMEM;
>>> +
>>> + epf->header = &epf_ntb_header;
>>> + ntb->epf = epf;
>>> + epf_set_drvdata(epf, ntb);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static struct pci_epf_ops epf_ntb_ops = {
>>> + .bind = epf_ntb_bind,
>>> + .unbind = epf_ntb_unbind,
>>> + .add_cfs = epf_ntb_add_cfs,
>>> +};
>>> +
>>> +static const struct pci_epf_device_id epf_ntb_ids[] = {
>>> + {
>>> + .name = "pci_epf_ntb",
>>> + },
>>> + {},
>>> +};
>>> +
>>> +static struct pci_epf_driver epf_ntb_driver = {
>>> + .driver.name = "pci_epf_ntb",
>>> + .probe = epf_ntb_probe,
>>> + .id_table = epf_ntb_ids,
>>> + .ops = &epf_ntb_ops,
>>> + .owner = THIS_MODULE,
>>> +};
>>> +
>>> +static int __init epf_ntb_init(void)
>>> +{
>>> + int ret;
>>> +
>>> + kpcintb_workqueue = alloc_workqueue("kpcintb", WQ_MEM_RECLAIM |
>>> + WQ_HIGHPRI, 0);
>>> + ret = pci_epf_register_driver(&epf_ntb_driver);
>>> + if (ret) {
>>> + destroy_workqueue(kpcintb_workqueue);
>>> + pr_err("Failed to register pci epf ntb driver --> %d\n", ret);
>>> + return ret;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +module_init(epf_ntb_init);
>>> +
>>> +static void __exit epf_ntb_exit(void)
>>> +{
>>> + pci_epf_unregister_driver(&epf_ntb_driver);
>>> + destroy_workqueue(kpcintb_workqueue);
>>> +}
>>> +module_exit(epf_ntb_exit);
>>> +
>>> +MODULE_DESCRIPTION("PCI EPF NTB DRIVER");
>>> +MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@...com>");
>>> +MODULE_LICENSE("GPL v2");
>>>
>
Powered by blists - more mailing lists