| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210205234734.3397-4-leoyang.li@nxp.com>
Date: Fri, 5 Feb 2021 17:47:22 -0600
From: Li Yang <leoyang.li@....com>
To: Shawn Guo <shawnguo@...nel.org>, Rob Herring <robh+dt@...nel.org>,
devicetree@...r.kernel.org,
Oleksij Rempel <linux@...pel-privat.de>,
Krzysztof Kozlowski <krzk@...nel.org>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: Li Yang <leoyang.li@....com>
Subject: [PATCH 03/15] dt-bindings: memory: fsl: convert ifc binding to yaml schema
Convert the txt binding to yaml format and add description. Also
updated the recommended node name to ifc-bus to align with the
simple-bus node name requirements.
Signed-off-by: Li Yang <leoyang.li@....com>
---
.../bindings/memory-controllers/fsl/ifc.txt | 82 ----------
.../bindings/memory-controllers/fsl/ifc.yaml | 140 ++++++++++++++++++
2 files changed, 140 insertions(+), 82 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
create mode 100644 Documentation/devicetree/bindings/memory-controllers/fsl/ifc.yaml
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt b/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
deleted file mode 100644
index 89427b018ba7..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-Integrated Flash Controller
-
-Properties:
-- name : Should be ifc
-- compatible : should contain "fsl,ifc". The version of the integrated
- flash controller can be found in the IFC_REV register at
- offset zero.
-
-- #address-cells : Should be either two or three. The first cell is the
- chipselect number, and the remaining cells are the
- offset into the chipselect.
-- #size-cells : Either one or two, depending on how large each chipselect
- can be.
-- reg : Offset and length of the register set for the device
-- interrupts: IFC may have one or two interrupts. If two interrupt
- specifiers are present, the first is the "common"
- interrupt (CM_EVTER_STAT), and the second is the NAND
- interrupt (NAND_EVTER_STAT). If there is only one,
- that interrupt reports both types of event.
-
-- little-endian : If this property is absent, the big-endian mode will
- be in use as default for registers.
-
-- ranges : Each range corresponds to a single chipselect, and covers
- the entire access window as configured.
-
-Child device nodes describe the devices connected to IFC such as NOR (e.g.
-cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices
-like FPGAs, CPLDs, etc.
-
-Example:
-
- ifc@...1e000 {
- compatible = "fsl,ifc", "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- reg = <0x0 0xffe1e000 0 0x2000>;
- interrupts = <16 2 19 2>;
- little-endian;
-
- /* NOR, NAND Flashes and CPLD on board */
- ranges = <0x0 0x0 0x0 0xee000000 0x02000000
- 0x1 0x0 0x0 0xffa00000 0x00010000
- 0x3 0x0 0x0 0xffb00000 0x00020000>;
-
- flash@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x2000000>;
- bank-width = <2>;
- device-width = <1>;
-
- partition@0 {
- /* 32MB for user data */
- reg = <0x0 0x02000000>;
- label = "NOR Data";
- };
- };
-
- flash@1,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,ifc-nand";
- reg = <0x1 0x0 0x10000>;
-
- partition@0 {
- /* This location must not be altered */
- /* 1MB for u-boot Bootloader Image */
- reg = <0x0 0x00100000>;
- label = "NAND U-Boot Image";
- read-only;
- };
- };
-
- cpld@3,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p1010rdb-cpld";
- reg = <0x3 0x0 0x000001f>;
- };
- };
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.yaml
new file mode 100644
index 000000000000..d37cae66b027
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/ifc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FSL/NXP Integrated Flash Controller
+
+maintainers:
+ - Li Yang <leoyang.li@....com>
+
+description: |
+ NXP's integrated flash controller (IFC) is an advanced version of the
+ enhanced local bus controller which includes similar programming and signal
+ interfaces with an extended feature set. The IFC provides access to multiple
+ external memory types, such as NAND flash (SLC and MLC), NOR flash, EPROM,
+ SRAM and other memories where address and data are shared on a bus.
+
+allOf:
+ - $ref: /schemas/simple-bus.yaml#
+
+properties:
+ $nodename:
+ pattern: "^ifc-bus@[0-9a-f]+$"
+
+ compatible:
+ contains:
+ const: fsl,ifc
+
+ "#address-cells":
+ enum: [2, 3]
+ description: |
+ Should be either two or three. The first cell is the chipselect
+ number, and the remaining cells are the offset into the chipselect.
+
+ "#size-cells":
+ enum: [1, 2]
+ description: |
+ Either one or two, depending on how large each chipselect can be.
+
+ reg:
+ maxItems: 1
+ description: |
+ Offset and length of the register set for the device.
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+ description: |
+ IFC may have one or two interrupts. If two interrupt specifiers are
+ present, the first is the "common" interrupt (CM_EVTER_STAT), and the
+ second is the NAND interrupt (NAND_EVTER_STAT). If there is only one,
+ that interrupt reports both types of event.
+
+ little-endian:
+ description: |
+ If this property is absent, the big-endian mode will be in use as default
+ for registers.
+
+ ranges:
+ description: |
+ Each range corresponds to a single chipselect, and covers the entire
+ access window as configured.
+
+patternProperties:
+ "^.*@[a-f0-9]+(,[a-f0-9]+)+$":
+ type: object
+ description: |
+ Child device nodes describe the devices connected to IFC such as NOR (e.g.
+ cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices
+ like FPGAs, CPLDs, etc.
+
+ required:
+ - compatible
+ - reg
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ifc-bus@...1e000 {
+ compatible = "fsl,ifc", "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0x0 0xffe1e000 0 0x2000>;
+ interrupts = <16 2 19 2>;
+ little-endian;
+
+ /* NOR, NAND Flashes and CPLD on board */
+ ranges = <0x0 0x0 0x0 0xee000000 0x02000000>,
+ <0x1 0x0 0x0 0xffa00000 0x00010000>,
+ <0x3 0x0 0x0 0xffb00000 0x00020000>;
+
+ flash@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x2000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ /* 32MB for user data */
+ reg = <0x0 0x02000000>;
+ label = "NOR Data";
+ };
+ };
+
+ flash@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc-nand";
+ reg = <0x1 0x0 0x10000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+ };
+
+ cpld@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1010rdb-cpld";
+ reg = <0x3 0x0 0x000001f>;
+ };
+ };
+ };
--
2.17.1
Powered by blists - more mailing lists