| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210208151244.16338-2-calvin.johnson@oss.nxp.com>
Date: Mon, 8 Feb 2021 20:42:30 +0530
From: Calvin Johnson <calvin.johnson@....nxp.com>
To: Grant Likely <grant.likely@....com>,
"Rafael J . Wysocki" <rafael@...nel.org>,
Jeremy Linton <jeremy.linton@....com>,
Andrew Lunn <andrew@...n.ch>,
Andy Shevchenko <andy.shevchenko@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Russell King - ARM Linux admin <linux@...linux.org.uk>,
Cristi Sovaiala <cristian.sovaiala@....com>,
Florin Laurentiu Chiculita <florinlaurentiu.chiculita@....com>,
Ioana Ciornei <ioana.ciornei@....com>,
Madalin Bucur <madalin.bucur@....nxp.com>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Marcin Wojtas <mw@...ihalf.com>,
Pieter Jansen Van Vuuren <pieter.jansenvv@...boosystems.io>,
Jon <jon@...id-run.com>, Saravana Kannan <saravanak@...gle.com>,
Randy Dunlap <rdunlap@...radead.org>
Cc: Laurentiu Tudor <laurentiu.tudor@....com>,
linux-kernel@...r.kernel.org, linux.cj@...il.com,
Diana Madalina Craciun <diana.craciun@....com>,
netdev@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-acpi@...r.kernel.org,
Calvin Johnson <calvin.johnson@....nxp.com>,
Len Brown <lenb@...nel.org>,
"Rafael J. Wysocki" <rjw@...ysocki.net>
Subject: [net-next PATCH v5 01/15] Documentation: ACPI: DSD: Document MDIO PHY
Introduce ACPI mechanism to get PHYs registered on a MDIO bus and
provide them to be connected to MAC.
Describe properties "phy-handle" and "phy-mode".
Signed-off-by: Calvin Johnson <calvin.johnson@....nxp.com>
---
Changes in v5:
- More cleanup
Changes in v4:
- More cleanup
Changes in v3: None
Changes in v2:
- Updated with more description in document
Documentation/firmware-guide/acpi/dsd/phy.rst | 133 ++++++++++++++++++
1 file changed, 133 insertions(+)
create mode 100644 Documentation/firmware-guide/acpi/dsd/phy.rst
diff --git a/Documentation/firmware-guide/acpi/dsd/phy.rst b/Documentation/firmware-guide/acpi/dsd/phy.rst
new file mode 100644
index 000000000000..e1e99cae5eb2
--- /dev/null
+++ b/Documentation/firmware-guide/acpi/dsd/phy.rst
@@ -0,0 +1,133 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+MDIO bus and PHYs in ACPI
+=========================
+
+The PHYs on an MDIO bus [1] are probed and registered using
+fwnode_mdiobus_register_phy().
+
+Later, for connecting these PHYs to MAC, the PHYs registered on the
+MDIO bus have to be referenced.
+
+This document introduces two _DSD properties that are to be used
+for connecting PHYs on the MDIO bus [3] to the MAC layer.
+
+These properties are defined in accordance with the "Device
+Properties UUID For _DSD" [2] document and the
+daffd814-6eba-4d8c-8a91-bc9bbf4aa301 UUID must be used in the Device
+Data Descriptors containing them.
+
+phy-handle
+----------
+For each MAC node, a device property "phy-handle" is used to reference
+the PHY that is registered on an MDIO bus. This is mandatory for
+network interfaces that have PHYs connected to MAC via MDIO bus.
+
+During the MDIO bus driver initialization, PHYs on this bus are probed
+using the _ADR object as shown below and are registered on the MDIO bus.
+
+::
+ Scope(\_SB.MDI0)
+ {
+ Device(PHY1) {
+ Name (_ADR, 0x1)
+ } // end of PHY1
+
+ Device(PHY2) {
+ Name (_ADR, 0x2)
+ } // end of PHY2
+ }
+
+Later, during the MAC driver initialization, the registered PHY devices
+have to be retrieved from the MDIO bus. For this, the MAC driver need
+references to the previously registered PHYs which are provided
+as device object references (e.g. \_SB.MDI0.PHY1).
+
+phy-mode
+--------
+The "phy-mode" _DSD property is used to describe the connection to
+the PHY. The valid values for "phy-mode" are defined in [4].
+
+The following ASL example illustrates the usage of these properties.
+
+DSDT entry for MDIO node
+------------------------
+
+The MDIO bus has an SoC component (MDIO controller) and a platform
+component (PHYs on the MDIO bus).
+
+a) Silicon Component
+This node describes the MDIO controller, MDI0
+---------------------------------------------
+::
+ Scope(_SB)
+ {
+ Device(MDI0) {
+ Name(_HID, "NXP0006")
+ Name(_CCA, 1)
+ Name(_UID, 0)
+ Name(_CRS, ResourceTemplate() {
+ Memory32Fixed(ReadWrite, MDI0_BASE, MDI_LEN)
+ Interrupt(ResourceConsumer, Level, ActiveHigh, Shared)
+ {
+ MDI0_IT
+ }
+ }) // end of _CRS for MDI0
+ } // end of MDI0
+ }
+
+b) Platform Component
+The PHY1 and PHY2 nodes represent the PHYs connected to MDIO bus MDI0
+---------------------------------------------------------------------
+::
+ Scope(\_SB.MDI0)
+ {
+ Device(PHY1) {
+ Name (_ADR, 0x1)
+ } // end of PHY1
+
+ Device(PHY2) {
+ Name (_ADR, 0x2)
+ } // end of PHY2
+ }
+
+DSDT entries representing MAC nodes
+-----------------------------------
+
+Below are the MAC nodes where PHY nodes are referenced.
+phy-mode and phy-handle are used as explained earlier.
+------------------------------------------------------
+::
+ Scope(\_SB.MCE0.PR17)
+ {
+ Name (_DSD, Package () {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package () {
+ Package (2) {"phy-mode", "rgmii-id"},
+ Package (2) {"phy-handle", \_SB.MDI0.PHY1}
+ }
+ })
+ }
+
+ Scope(\_SB.MCE0.PR18)
+ {
+ Name (_DSD, Package () {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package () {
+ Package (2) {"phy-mode", "rgmii-id"},
+ Package (2) {"phy-handle", \_SB.MDI0.PHY2}}
+ }
+ })
+ }
+
+References
+==========
+
+[1] Documentation/networking/phy.rst
+
+[2] https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf
+
+[3] Documentation/firmware-guide/acpi/DSD-properties-rules.rst
+
+[4] Documentation/devicetree/bindings/net/ethernet-controller.yaml
--
2.17.1
Powered by blists - more mailing lists