[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210208145819.253484068@linuxfoundation.org>
Date: Mon, 8 Feb 2021 16:00:08 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Marek Vasut <marex@...x.de>,
Alexandre Torgue <alexandre.torgue@...com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Patrice Chotard <patrice.chotard@...com>,
Patrick Delaunay <patrick.delaunay@...com>,
linux-stm32@...md-mailman.stormreply.com,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.10 021/120] ARM: dts: stm32: Connect card-detect signal on DHCOM
From: Marek Vasut <marex@...x.de>
[ Upstream commit 1a9b001237f85d3cf11a408c2daca6a2245b2add ]
The DHCOM SoM uSD slot card detect signal is connected to GPIO PG1,
describe it in the DT.
Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <marex@...x.de>
Cc: Alexandre Torgue <alexandre.torgue@...com>
Cc: Maxime Coquelin <mcoquelin.stm32@...il.com>
Cc: Patrice Chotard <patrice.chotard@...com>
Cc: Patrick Delaunay <patrick.delaunay@...com>
Cc: linux-stm32@...md-mailman.stormreply.com
To: linux-arm-kernel@...ts.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@...s.st.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index f796a6150313e..90523a44d2541 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -353,7 +353,7 @@
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
- broken-cd;
+ cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
st,sig-dir;
st,neg-edge;
st,use-ckin;
--
2.27.0
Powered by blists - more mailing lists