linux-kernel - Re: [PATCH v4 11/22] media: camss: Add support for CSIPHY hardware version Titan 170

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 8 Feb 2021 21:02:45 +0300
From:   Andrey Konovalov <andrey.konovalov@...aro.org>
To:     Robert Foss <robert.foss@...aro.org>, todor.too@...il.com,
        agross@...nel.org, bjorn.andersson@...aro.org, mchehab@...nel.org,
        robh+dt@...nel.org, angelogioacchino.delregno@...ainline.org,
        linux-media@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        AngeloGioacchino Del Regno <kholk11@...il.com>,
        Rob Herring <robh@...nel.org>,
        Sakari Ailus <sakari.ailus@....fi>,
        Nicolas Boichat <drinkcat@...omium.org>
Cc:     Tomasz Figa <tfiga@...omium.org>,
        Azam Sadiq Pasha Kapatrala Syed <akapatra@...cinc.com>,
        Sarvesh Sridutt <Sarvesh.Sridutt@...rtwirelesscompute.com>,
        Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        Jonathan Marek <jonathan@...ek.ca>
Subject: Re: [PATCH v4 11/22] media: camss: Add support for CSIPHY hardware
 version Titan 170

Hi Robert,

Thank you for your patchset!

On 05.02.2021 13:44, Robert Foss wrote:
> Add register definitions for version 170 of the Titan architecture
> and implement support for the CSIPHY subdevice.
> 
> Signed-off-by: Robert Foss <robert.foss@...aro.org>
> ---
>   .../qcom/camss/camss-csiphy-3ph-1-0.c         | 182 ++++++++++++++++--
>   .../media/platform/qcom/camss/camss-csiphy.c  |  66 +++++--
>   drivers/media/platform/qcom/camss/camss.c     |  74 +++++++
>   3 files changed, 290 insertions(+), 32 deletions(-)
> 
> diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
> index 97cb9de85031..148b8c50382c 100644
> --- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
> +++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
> @@ -47,6 +47,105 @@
>   #define CSIPHY_3PH_CMN_CSI_COMMON_CTRL6_SHOW_REV_ID	BIT(1)
>   #define CSIPHY_3PH_CMN_CSI_COMMON_STATUSn(n)	(0x8b0 + 0x4 * (n))
>   
> +#define CSIPHY_DEFAULT_PARAMS            0
> +#define CSIPHY_LANE_ENABLE               1
> +#define CSIPHY_SETTLE_CNT_LOWER_BYTE     2
> +#define CSIPHY_SETTLE_CNT_HIGHER_BYTE    3
> +#define CSIPHY_DNP_PARAMS                4
> +#define CSIPHY_2PH_REGS                  5
> +#define CSIPHY_3PH_REGS                  6
> +
> +struct csiphy_reg_t {
> +	int32_t  reg_addr;
> +	int32_t  reg_data;
> +	int32_t  delay;
> +	uint32_t csiphy_param_type;
> +};
> +
> +static const struct
> +csiphy_reg_t lane_regs_sdm845[5][14] = {

<snip>

> @@ -208,6 +294,66 @@ static void csiphy_lanes_enable(struct csiphy_device *csiphy,
>   
>   	val = CSIPHY_3PH_LNn_MISC1_IS_CLKLANE;
>   	writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_MISC1(l));
> +}
> +
> +static void csiphy_gen2_config_lanes(struct csiphy_device *csiphy,
> +				     u8 settle_cnt)
> +{
> +	int i, l;
> +	u32 val;
> +
> +	for (l = 0; l < 5; l++) {
> +		for (i = 0; i < 14; i++) {
> +			struct csiphy_reg_t *r = &lane_regs_sdm845[l][i];

- this line gives me a compilation warning :
warning: initialization discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
   306 |    struct csiphy_reg_t *r = &lane_regs_sdm845[l][i];

Change it to:
	const struct csiphy_reg_t *r = &lane_regs_sdm845[l][i];
?

Thanks,
Andrey