linux-kernel - [PATCH v10 net-next 14/15] net: mvpp2: set 802.3x GoP Flow Control mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1612773167-22490-15-git-send-email-stefanc@marvell.com>
Date:   Mon, 8 Feb 2021 10:32:46 +0200
From:   <stefanc@...vell.com>
To:     <netdev@...r.kernel.org>
CC:     <thomas.petazzoni@...tlin.com>, <davem@...emloft.net>,
        <nadavh@...vell.com>, <ymarkman@...vell.com>,
        <linux-kernel@...r.kernel.org>, <stefanc@...vell.com>,
        <kuba@...nel.org>, <linux@...linux.org.uk>, <mw@...ihalf.com>,
        <andrew@...n.ch>, <rmk+kernel@...linux.org.uk>,
        <atenart@...nel.org>, <devicetree@...r.kernel.org>,
        <robh+dt@...nel.org>, <sebastian.hesselbarth@...il.com>,
        <gregory.clement@...tlin.com>,
        <linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH v10 net-next 14/15] net: mvpp2: set 802.3x GoP Flow Control mode

From: Stefan Chulski <stefanc@...vell.com>

This patch fix GMAC TX flow control autoneg.
Flow control autoneg wrongly were disabled with enabled TX
flow control.

Signed-off-by: Stefan Chulski <stefanc@...vell.com>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index a472125..4d0a398 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -6283,7 +6283,7 @@ static void mvpp2_gmac_config(struct mvpp2_port *port, unsigned int mode,
 	old_ctrl4 = ctrl4 = readl(port->base + MVPP22_GMAC_CTRL_4_REG);
 
 	ctrl0 &= ~MVPP2_GMAC_PORT_TYPE_MASK;
-	ctrl2 &= ~(MVPP2_GMAC_INBAND_AN_MASK | MVPP2_GMAC_PCS_ENABLE_MASK);
+	ctrl2 &= ~(MVPP2_GMAC_INBAND_AN_MASK | MVPP2_GMAC_PCS_ENABLE_MASK | MVPP2_GMAC_FLOW_CTRL_MASK);
 
 	/* Configure port type */
 	if (phy_interface_mode_is_8023z(state->interface)) {
-- 
1.9.1