[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <844435eeea74c6bdc9d1c64cf6ed86f9@codeaurora.org>
Date: Mon, 08 Feb 2021 15:43:35 +0530
From: bgodavar@...eaurora.org
To: Venkata Lakshmi Narayana Gubba <gubbaven@...eaurora.org>,
Kalle Valo <kvalo@...eaurora.org>
Cc: marcel@...tmann.org, johan.hedberg@...il.com, mka@...omium.org,
linux-kernel@...r.kernel.org, linux-bluetooth@...r.kernel.org,
hemantg@...eaurora.org, linux-arm-msm@...r.kernel.org,
rjliao@...eaurora.org, hbandi@...eaurora.org,
abhishekpandit@...omium.org
Subject: Re: [PATCH v1] Bluetooth: hci_qca:Fixed issue during suspend
+ Kalle Valo for +1T
On 2021-02-05 21:07, Venkata Lakshmi Narayana Gubba wrote:
> If BT SoC is running with ROM FW then just return in
> qca_suspend function as ROM FW does not support
> in-band sleep.
>
> Fixes: 2be43abac5a8 ("Bluetooth: hci_qca: Wait for timeout during
> suspend")
> Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@...eaurora.org>
> ---
> drivers/bluetooth/hci_qca.c | 12 +++++++++++-
> 1 file changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index ff2fb68..de36af6 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -77,7 +77,8 @@ enum qca_flags {
> QCA_MEMDUMP_COLLECTION,
> QCA_HW_ERROR_EVENT,
> QCA_SSR_TRIGGERED,
> - QCA_BT_OFF
> + QCA_BT_OFF,
> + QCA_ROM_FW
> };
>
> enum qca_capabilities {
> @@ -1664,6 +1665,7 @@ static int qca_setup(struct hci_uart *hu)
> if (ret)
> return ret;
>
> + clear_bit(QCA_ROM_FW, &qca->flags);
> /* Patch downloading has to be done without IBS mode */
> set_bit(QCA_IBS_DISABLED, &qca->flags);
>
> @@ -1721,12 +1723,14 @@ static int qca_setup(struct hci_uart *hu)
> hu->hdev->cmd_timeout = qca_cmd_timeout;
> } else if (ret == -ENOENT) {
> /* No patch/nvm-config found, run with original fw/config */
> + set_bit(QCA_ROM_FW, &qca->flags);
> ret = 0;
> } else if (ret == -EAGAIN) {
> /*
> * Userspace firmware loader will return -EAGAIN in case no
> * patch/nvm-config is found, so run with original fw/config.
> */
> + set_bit(QCA_ROM_FW, &qca->flags);
> ret = 0;
> }
>
> @@ -2103,6 +2107,12 @@ static int __maybe_unused qca_suspend(struct
> device *dev)
>
> set_bit(QCA_SUSPENDING, &qca->flags);
>
> + /* if BT SoC is running with default firmware then it does not
> + * support in-band sleep
> + */
> + if (test_bit(QCA_ROM_FW, &qca->flags))
> + return 0;
> +
> /* During SSR after memory dump collection, controller will be
> * powered off and then powered on.If controller is powered off
> * during SSR then we should wait until SSR is completed.
Powered by blists - more mailing lists