[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210208135609.7685-14-Sergey.Semin@baikalelectronics.ru>
Date: Mon, 8 Feb 2021 16:55:57 +0300
From: Serge Semin <Sergey.Semin@...kalelectronics.ru>
To: Rob Herring <robh+dt@...nel.org>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...com>,
Jose Abreu <joabreu@...opsys.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Johan Hovold <johan@...nel.org>,
Maxime Ripard <mripard@...nel.org>,
Joao Pinto <jpinto@...opsys.com>,
Lars Persson <larper@...s.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>
CC: Serge Semin <Sergey.Semin@...kalelectronics.ru>,
Serge Semin <fancer.lancer@...il.com>,
Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>,
Pavel Parkhomenko <Pavel.Parkhomenko@...kalelectronics.ru>,
Vyacheslav Mitrofanov
<Vyacheslav.Mitrofanov@...kalelectronics.ru>,
<netdev@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v2 13/24] net: stmmac: Fix clocks left enabled on glue-probes failure
The generic clocks request and preparation have been moved from
stmmac_dvr_probe()/stmmac_init_ptp() to the stmmac_probe_config_dt()
method in the framework of commit f573c0b9c4e0 ("stmmac: move stmmac_clk,
pclk, clk_ptp_ref and stmmac_rst to platform structure"). At the same time
the clocks disabling and reset assertion have been left in
stmmac_dvr_remove() instead of also being moved to the symmetric
antagonistic method - stmmac_remove_config_dt(). Due to that all the glue
drivers probe cleanup-on-failure paths don't perform the generic clocks
disable/unprepare procedure, which of course is wrong. Fix it by moving
the clocks disable/unprepare methods invocation to the
stmmac_remove_config_dt() function.
Fixes: f573c0b9c4e0 ("stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to platform structure")
Signed-off-by: Serge Semin <Sergey.Semin@...kalelectronics.ru>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 2 ++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 --
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 4 +++-
3 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index 103d2448e9e0..56b914b5527a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -665,6 +665,8 @@ static void intel_eth_pci_remove(struct pci_dev *pdev)
pci_free_irq_vectors(pdev);
+ clk_disable_unprepare(priv->plat->stmmac_clk);
+
clk_unregister_fixed_rate(priv->plat->stmmac_clk);
pcim_iounmap_regions(pdev, BIT(0));
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 26b971cd4da5..b371842d9337 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -5157,8 +5157,6 @@ int stmmac_dvr_remove(struct device *dev)
phylink_destroy(priv->phylink);
if (priv->plat->stmmac_rst)
reset_control_assert(priv->plat->stmmac_rst);
- clk_disable_unprepare(priv->plat->pclk);
- clk_disable_unprepare(priv->plat->stmmac_clk);
if (priv->hw->pcs != STMMAC_PCS_TBI &&
priv->hw->pcs != STMMAC_PCS_RTBI)
stmmac_mdio_unregister(ndev);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index c9feac70ca77..ff66c470f07f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -621,11 +621,13 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
* @pdev: platform_device structure
* @plat: driver data platform structure
*
- * Release resources claimed by stmmac_probe_config_dt().
+ * Disable and release resources claimed by stmmac_probe_config_dt().
*/
void stmmac_remove_config_dt(struct platform_device *pdev,
struct plat_stmmacenet_data *plat)
{
+ clk_disable_unprepare(plat->pclk);
+ clk_disable_unprepare(plat->stmmac_clk);
of_node_put(plat->phy_node);
of_node_put(plat->mdio_node);
}
--
2.29.2
Powered by blists - more mailing lists