| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <YCFHRGbiVxpNgkQS@shinobu>
Date: Mon, 8 Feb 2021 23:14:28 +0900
From: William Breathitt Gray <vilhelm.gray@...il.com>
To: Oleksij Rempel <o.rempel@...gutronix.de>
Cc: Rob Herring <robh+dt@...nel.org>,
Ahmad Fatoum <a.fatoum@...gutronix.de>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Pengutronix Kernel Team <kernel@...gutronix.de>,
David Jander <david@...tonic.nl>,
Robin van der Gracht <robin@...tonic.nl>,
linux-iio@...r.kernel.org,
Linus Walleij <linus.walleij@...aro.org>,
Jonathan Cameron <jic23@...nel.org>
Subject: Re: [PATCH v5 2/2] counter: add IRQ or GPIO based event counter
On Mon, Feb 08, 2021 at 02:53:47PM +0100, Oleksij Rempel wrote:
> Add simple IRQ or GPIO base event counter. This device is used to measure
> rotation speed of some agricultural devices, so no high frequency on the
> counter pin is expected.
>
> The maximal measurement frequency depends on the CPU and system load. On
> the idle iMX6S I was able to measure up to 20kHz without count drops.
>
> Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
> Reviewed-by: Ahmad Fatoum <a.fatoum@...gutronix.de>
Hi Oleksij,
I haven't had a chance to do a proper review just yet, but a couple
things caught my eye as I skimmed so I want to mention them inline
below. I'll do a more complete review this weekend or soon after
> ---
> drivers/counter/Kconfig | 10 ++
> drivers/counter/Makefile | 1 +
> drivers/counter/event-cnt.c | 250 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 261 insertions(+)
> create mode 100644 drivers/counter/event-cnt.c
>
> diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig
> index 2de53ab0dd25..3284987e070a 100644
> --- a/drivers/counter/Kconfig
> +++ b/drivers/counter/Kconfig
> @@ -29,6 +29,16 @@ config 104_QUAD_8
> The base port addresses for the devices may be configured via the base
> array module parameter.
>
> +config EVENT_CNT
> + tristate "Event counter driver"
> + depends on GPIOLIB
> + help
> + Select this option to enable event counter driver. Any interrupt source
> + can be used by this driver as the event source.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called gpio-pulse-cnt.
> +
> config STM32_TIMER_CNT
> tristate "STM32 Timer encoder counter driver"
> depends on MFD_STM32_TIMERS || COMPILE_TEST
> diff --git a/drivers/counter/Makefile b/drivers/counter/Makefile
> index 0a393f71e481..6626900468f6 100644
> --- a/drivers/counter/Makefile
> +++ b/drivers/counter/Makefile
> @@ -6,6 +6,7 @@
> obj-$(CONFIG_COUNTER) += counter.o
>
> obj-$(CONFIG_104_QUAD_8) += 104-quad-8.o
> +obj-$(CONFIG_EVENT_CNT) += event-cnt.o
> obj-$(CONFIG_STM32_TIMER_CNT) += stm32-timer-cnt.o
> obj-$(CONFIG_STM32_LPTIMER_CNT) += stm32-lptimer-cnt.o
> obj-$(CONFIG_TI_EQEP) += ti-eqep.o
> diff --git a/drivers/counter/event-cnt.c b/drivers/counter/event-cnt.c
> new file mode 100644
> index 000000000000..a394fe72c4e4
> --- /dev/null
> +++ b/drivers/counter/event-cnt.c
> @@ -0,0 +1,250 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2021 Pengutronix, Oleksij Rempel <kernel@...gutronix.de>
> + */
> +
> +#include <linux/counter.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#define EVENT_CNT_NAME "event-cnt"
> +
> +struct event_cnt_priv {
> + struct counter_device counter;
> + struct counter_ops ops;
> + struct gpio_desc *gpio;
> + int irq;
> + bool enabled;
> + atomic_t count;
> +};
> +
> +static irqreturn_t event_cnt_isr(int irq, void *dev_id)
> +{
> + struct event_cnt_priv *priv = dev_id;
> +
> + atomic_inc(&priv->count);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static ssize_t event_cnt_enable_read(struct counter_device *counter,
> + struct counter_count *count, void *private,
> + char *buf)
> +{
> + struct event_cnt_priv *priv = counter->priv;
> +
> + return sysfs_emit(buf, "%d\n", priv->enabled);
> +}
> +
> +static ssize_t event_cnt_enable_write(struct counter_device *counter,
> + struct counter_count *count,
> + void *private, const char *buf,
> + size_t len)
> +{
> + struct event_cnt_priv *priv = counter->priv;
> + bool enable;
> + ssize_t ret;
> +
> + ret = kstrtobool(buf, &enable);
> + if (ret)
> + return ret;
> +
> + if (priv->enabled == enable)
> + return len;
> +
> + if (enable) {
> + priv->enabled = enable;
> + enable_irq(priv->irq);
> + } else {
> + disable_irq(priv->irq);
> + priv->enabled = enable;
> + }
> +
> + return len;
> +}
> +
> +static const struct counter_count_ext event_cnt_ext[] = {
> + {
> + .name = "enable",
> + .read = event_cnt_enable_read,
> + .write = event_cnt_enable_write,
> + },
> +};
> +
> +static enum counter_synapse_action event_cnt_synapse_actionss[] = {
> + COUNTER_SYNAPSE_ACTION_RISING_EDGE,
> +};
> +
> +static int event_cnt_action_get(struct counter_device *counter,
> + struct counter_count *count,
> + struct counter_synapse *synapse,
> + size_t *action)
> +{
> + *action = COUNTER_SYNAPSE_ACTION_RISING_EDGE;
The value pointed by this "action" parameter should be set to the index
of the action you want from your Synapse's ations[] array.
> +
> + return 0;
> +}
> +
> +static int event_cnt_read(struct counter_device *counter,
> + struct counter_count *count,
> + unsigned long *val)
> +{
> + struct event_cnt_priv *priv = counter->priv;
> +
> + *val = atomic_read(&priv->count);
> +
> + return 0;
> +}
> +
> +static int event_cnt_write(struct counter_device *counter,
> + struct counter_count *count,
> + const unsigned long val)
> +{
> + struct event_cnt_priv *priv = counter->priv;
> +
> + atomic_set(&priv->count, val);
> +
> + return 0;
> +}
> +
> +static int event_cnt_function_get(struct counter_device *counter,
> + struct counter_count *count, size_t *function)
> +{
> + *function = COUNTER_COUNT_FUNCTION_INCREASE;
Same problem here as before: should be set to the index of the function
you want from your functions[] array.
William Breathitt Gray
> +
> + return 0;
> +}
> +
> +static int event_cnt_signal_read(struct counter_device *counter,
> + struct counter_signal *signal,
> + enum counter_signal_value *val)
> +{
> + struct event_cnt_priv *priv = counter->priv;
> + int ret;
> +
> + ret = gpiod_get_value(priv->gpio);
> + if (ret < 0)
> + return ret;
> +
> + *val = ret ? COUNTER_SIGNAL_HIGH : COUNTER_SIGNAL_LOW;
> +
> + return 0;
> +}
> +
> +static struct counter_signal event_cnt_signals[] = {
> + {
> + .id = 0,
> + .name = "Channel 0 signal",
> + },
> +};
> +
> +static struct counter_synapse event_cnt_synapses[] = {
> + {
> + .actions_list = event_cnt_synapse_actionss,
> + .num_actions = ARRAY_SIZE(event_cnt_synapse_actionss),
> + .signal = &event_cnt_signals[0]
> + },
> +};
> +
> +static enum counter_count_function event_cnt_functions[] = {
> + COUNTER_COUNT_FUNCTION_INCREASE,
> +};
> +
> +static struct counter_count event_cnts[] = {
> + {
> + .id = 0,
> + .name = "Channel 1 Count",
> + .functions_list = event_cnt_functions,
> + .num_functions = ARRAY_SIZE(event_cnt_functions),
> + .synapses = event_cnt_synapses,
> + .num_synapses = ARRAY_SIZE(event_cnt_synapses),
> + .ext = event_cnt_ext,
> + .num_ext = ARRAY_SIZE(event_cnt_ext),
> + },
> +};
> +
> +static int event_cnt_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct event_cnt_priv *priv;
> + int ret;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->irq = platform_get_irq_optional(pdev, 0);
> + if (priv->irq == -ENXIO)
> + priv->irq = 0;
> + else if (priv->irq < 0)
> + return dev_err_probe(dev, priv->irq, "failed to get IRQ\n");
> +
> + priv->gpio = devm_gpiod_get_optional(dev, NULL, GPIOD_IN);
> + if (IS_ERR(priv->gpio))
> + return dev_err_probe(dev, PTR_ERR(priv->gpio), "failed to get GPIO\n");
> +
> + if (!priv->irq && !priv->gpio) {
> + dev_err(dev, "IRQ and GPIO are not found. At least one source should be provided\n");
> + return -ENODEV;
> + }
> +
> + if (!priv->irq) {
> + int irq = gpiod_to_irq(priv->gpio);
> +
> + if (irq < 0)
> + return dev_err_probe(dev, irq, "failed to get IRQ from GPIO\n");
> +
> + priv->irq = irq;
> + }
> +
> + priv->ops.action_get = event_cnt_action_get;
> + priv->ops.count_read = event_cnt_read;
> + priv->ops.count_write = event_cnt_write;
> + priv->ops.function_get = event_cnt_function_get;
> + if (priv->gpio)
> + priv->ops.signal_read = event_cnt_signal_read;
> +
> + priv->counter.name = dev_name(dev);
> + priv->counter.parent = dev;
> + priv->counter.ops = &priv->ops;
> + priv->counter.counts = event_cnts;
> + priv->counter.num_counts = ARRAY_SIZE(event_cnts);
> + priv->counter.signals = event_cnt_signals;
> + priv->counter.num_signals = ARRAY_SIZE(event_cnt_signals);
> + priv->counter.priv = priv;
> +
> + irq_set_status_flags(priv->irq, IRQ_NOAUTOEN);
> + ret = devm_request_irq(dev, priv->irq, event_cnt_isr,
> + IRQF_TRIGGER_RISING | IRQF_NO_THREAD,
> + EVENT_CNT_NAME, priv);
> + if (ret)
> + return ret;
> +
> + platform_set_drvdata(pdev, priv);
> +
> + return devm_counter_register(dev, &priv->counter);
> +}
> +
> +static const struct of_device_id event_cnt_of_match[] = {
> + { .compatible = "event-counter", },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, event_cnt_of_match);
> +
> +static struct platform_driver event_cnt_driver = {
> + .probe = event_cnt_probe,
> + .driver = {
> + .name = EVENT_CNT_NAME,
> + .of_match_table = event_cnt_of_match,
> + },
> +};
> +module_platform_driver(event_cnt_driver);
> +
> +MODULE_ALIAS("platform:event-counter");
> +MODULE_AUTHOR("Oleksij Rempel <o.rempel@...gutronix.de>");
> +MODULE_DESCRIPTION("Event counter driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.30.0
>
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists