| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAL_JsqK+eM_RrzXnbm2GJGJuVwAjEz1TeTux18Hc727vovbqDA@mail.gmail.com>
Date: Mon, 8 Feb 2021 08:21:59 -0600
From: Rob Herring <robh@...nel.org>
To: Viresh Kumar <viresh.kumar@...aro.org>
Cc: Frank Rowand <frowand.list@...il.com>,
Pantelis Antoniou <pantelis.antoniou@...sulko.com>,
Masahiro Yamada <masahiroy@...nel.org>,
Vincent Guittot <vincent.guittot@...aro.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Anmar Oueja <anmar.oueja@...aro.org>,
Bill Mills <bill.mills@...aro.org>,
David Gibson <david@...son.dropbear.id.au>,
devicetree@...r.kernel.org, Michal Marek <michal.lkml@...kovi.net>
Subject: Re: [PATCH V7 6/6] of: unittest: Statically apply overlays using fdtoverlay
On Mon, Feb 8, 2021 at 5:18 AM Viresh Kumar <viresh.kumar@...aro.org> wrote:
>
> On 03-02-21, 19:54, Rob Herring wrote:
> > diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
> > index b00855b247e0..886d2e6c58f0 100644
> > --- a/scripts/Makefile.lib
> > +++ b/scripts/Makefile.lib
> > @@ -66,6 +66,9 @@ multi-used := $(multi-used-y) $(multi-used-m)
> > real-obj-y := $(foreach m, $(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
> > real-obj-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)) $($(m:.o=-))),$($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)),$(m)))
> >
> > +real-dtb-y := $(foreach m,$(dtb-y), $(if $(strip $($(m:.dtb=-dtbs))),$($(m:.dtb=-dtbs)),))
>
> Sorry for my lack of knowledge, but what does (m:.dtb=-dtbs) do
> exactly ?
In string 'm' replace '.dtb' with '-dtbs'. Then we get the value of
that variable.
>
> > +dtb-y += $(real-dtb-y)
> > +
> > always-y += $(always-m)
> >
> > # hostprogs-always-y += foo
> > @@ -332,6 +335,15 @@ $(obj)/%.dtb: $(src)/%.dts $(DTC) FORCE
> > $(obj)/%.dtbo: $(src)/%.dts $(DTC) FORCE
> > $(call if_changed_dep,dtc)
> >
> > +
> > +quiet_cmd_fdtoverlay = DTOVL $@
> > + cmd_fdtoverlay = $(objtree)/scripts/dtc/fdtoverlay -o $@ -i $(real-prereqs)
> > +
> > +.SECONDEXPANSION:
> > +
> > +$(obj)/%.dtb: $$(addprefix $$(obj)/,$$(%-dtbs)) FORCE
> > + $(call if_changed,fdtoverlay)
> > +
> > DT_CHECKER ?= dt-validate
> > DT_BINDING_DIR := Documentation/devicetree/bindings
> > # DT_TMP_SCHEMA may be overridden from Documentation/devicetree/bindings/Makefile
>
> I tried to test a dtbo from arch/ code like this:
>
> diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
> index f4d68caeba83..0ee9d7dc8e07 100644
> --- a/arch/arm64/boot/dts/hisilicon/Makefile
> +++ b/arch/arm64/boot/dts/hisilicon/Makefile
> @@ -6,3 +6,8 @@ dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
> dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb
> dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb
> dtb-$(CONFIG_ARCH_HISI) += hip07-d05.dtb
> +
> +DTC_FLAGS_hi3660-hikey960 += -@
> +
> +test1-dtbs := hi3660-hikey960.dtb hi3660-hikey960-overlay.dtbo
> +dtb-y += test1.dtb
> diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960-overlay.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960-overlay.dts
> new file mode 100644
> index 000000000000..1235a911caae
> --- /dev/null
> +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960-overlay.dts
> @@ -0,0 +1,16 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/dts-v1/;
> +/plugin/;
> +
> +&dwmmc2 {
> + #address-cells = <0x1>;
> + #size-cells = <0x0>;
> +
> + wlcore2: wlcore@5 {
> + compatible = "ti,wl1837";
> + reg = <2>;
> + interrupt-parent = <&gpio22>;
> + interrupts = <3 1>;
> + test = <1>;
> + };
> +};
>
> Even after your patch there are some issues I am facing:
>
> 1. dtbs_check doesn't test hi3660-hikey960-overlay.dts. I also tried
> to add it to dtbo-y +=, but that didn't do anything as well.
>
> I expected this to work as we have this in scripts/Makefile.lib:
>
> ifneq ($(CHECK_DTBS),)
> extra-y += $(patsubst %.dtb,%.dt.yaml, $(dtb-y))
> +extra-y += $(patsubst %.dtbo,%.dt.yaml, $(dtb-y))
> extra-$(CONFIG_OF_ALL_DTBS) += $(patsubst %.dtb,%.dt.yaml, $(dtb-))
> +extra-$(CONFIG_OF_ALL_DTBS) += $(patsubst %.dtbo,%.dt.yaml, $(dtb-))
> endif
I'll have to try that out. I think that should work.
> 2. This fails dtbs_check as it tries to run it for the source file of
> test1.dtb
>
> $ make ARCH=arm64 O=../barm64/ -j8 CROSS_COMPILE=aarch64-linux-gnu- dtbs_check
> make[1]: Entering directory '/mnt/ssd/all/work/repos/devel/barm64'
> make[3]: *** No rule to make target 'arch/arm64/boot/dts/hisilicon/test1.dt.yaml', needed by '__build'. Stop.
> /mnt/ssd/all/work/repos/devel/linux/scripts/Makefile.build:496: recipe for target 'arch/arm64/boot/dts/hisilicon' failed
> make[2]: *** [arch/arm64/boot/dts/hisilicon] Error 2
> make[2]: *** Waiting for unfinished jobs....
> /mnt/ssd/all/work/repos/devel/linux/Makefile:1345: recipe for target 'dtbs' failed
> make[1]: *** [dtbs] Error 2
> make[1]: Leaving directory '/mnt/ssd/all/work/repos/devel/barm64'
> Makefile:185: recipe for target '__sub-make' failed
> make: *** [__sub-make] Error 2
>
> I am not sure how to fix this.
Even if we fixed the make rules, it's not going to work with
validation. There's some information from source files that we
maintain in yaml output, but is lost in dtb output. For example, the
sizes of /bits/ syntax are maintained. For now, I think we'll want to
just validate base and overlays separately. We may need to turn off
checks in overlays for required properties as they may be incomplete.
We already do that on disabled nodes.
Rob
Powered by blists - more mailing lists