linux-kernel - [PATCH 4.9 30/43] xhci: fix bounce buffer usage for non-sg list case

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210208145807.528389981@linuxfoundation.org>
Date:   Mon,  8 Feb 2021 16:00:56 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Andreas Hartmann <andihartmann@...19freenet.de>,
        Mathias Nyman <mathias.nyman@...ux.intel.com>
Subject: [PATCH 4.9 30/43] xhci: fix bounce buffer usage for non-sg list case

From: Mathias Nyman <mathias.nyman@...ux.intel.com>

commit d4a610635400ccc382792f6be69427078541c678 upstream.

xhci driver may in some special cases need to copy small amounts
of payload data to a bounce buffer in order to meet the boundary
and alignment restrictions set by the xHCI specification.

In the majority of these cases the data is in a sg list, and
driver incorrectly assumed data is always in urb->sg when using
the bounce buffer.

If data instead is contiguous, and in urb->transfer_buffer, we may still
need to bounce buffer a small part if data starts very close (less than
packet size) to a 64k boundary.

Check if sg list is used before copying data to/from it.

Fixes: f9c589e142d0 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer")
Cc: stable@...r.kernel.org
Reported-by: Andreas Hartmann <andihartmann@...19freenet.de>
Tested-by: Andreas Hartmann <andihartmann@...19freenet.de>
Signed-off-by: Mathias Nyman <mathias.nyman@...ux.intel.com>
Link: https://lore.kernel.org/r/20210203113702.436762-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/usb/host/xhci-ring.c |   31 ++++++++++++++++++++-----------
 1 file changed, 20 insertions(+), 11 deletions(-)

--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -692,11 +692,16 @@ void xhci_unmap_td_bounce_buffer(struct
 	dma_unmap_single(dev, seg->bounce_dma, ring->bounce_buf_len,
 			 DMA_FROM_DEVICE);
 	/* for in tranfers we need to copy the data from bounce to sg */
-	len = sg_pcopy_from_buffer(urb->sg, urb->num_sgs, seg->bounce_buf,
-			     seg->bounce_len, seg->bounce_offs);
-	if (len != seg->bounce_len)
-		xhci_warn(xhci, "WARN Wrong bounce buffer read length: %zu != %d\n",
-				len, seg->bounce_len);
+	if (urb->num_sgs) {
+		len = sg_pcopy_from_buffer(urb->sg, urb->num_sgs, seg->bounce_buf,
+					   seg->bounce_len, seg->bounce_offs);
+		if (len != seg->bounce_len)
+			xhci_warn(xhci, "WARN Wrong bounce buffer read length: %zu != %d\n",
+				  len, seg->bounce_len);
+	} else {
+		memcpy(urb->transfer_buffer + seg->bounce_offs, seg->bounce_buf,
+		       seg->bounce_len);
+	}
 	seg->bounce_len = 0;
 	seg->bounce_offs = 0;
 }
@@ -3196,12 +3201,16 @@ static int xhci_align_td(struct xhci_hcd
 
 	/* create a max max_pkt sized bounce buffer pointed to by last trb */
 	if (usb_urb_dir_out(urb)) {
-		len = sg_pcopy_to_buffer(urb->sg, urb->num_sgs,
-				   seg->bounce_buf, new_buff_len, enqd_len);
-		if (len != new_buff_len)
-			xhci_warn(xhci,
-				"WARN Wrong bounce buffer write length: %zu != %d\n",
-				len, new_buff_len);
+		if (urb->num_sgs) {
+			len = sg_pcopy_to_buffer(urb->sg, urb->num_sgs,
+						 seg->bounce_buf, new_buff_len, enqd_len);
+			if (len != new_buff_len)
+				xhci_warn(xhci, "WARN Wrong bounce buffer write length: %zu != %d\n",
+					  len, new_buff_len);
+		} else {
+			memcpy(seg->bounce_buf, urb->transfer_buffer + enqd_len, new_buff_len);
+		}
+
 		seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
 						 max_pkt, DMA_TO_DEVICE);
 	} else {