[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210209125912.3398-15-nsaenzjulienne@suse.de>
Date: Tue, 9 Feb 2021 13:59:10 +0100
From: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
To: f.fainelli@...il.com, linux-kernel@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
Cc: linux-rpi-kernel@...ts.infradead.org, phil@...pberrypi.com,
wahrenst@....net, bcm-kernel-feedback-list@...adcom.com,
linux-arm-kernel@...ts.infradead.org, mripard@...nel.org,
eric@...olt.net, devicetree@...r.kernel.org
Subject: [RFC/PATCH v2 14/16] ARM: dts: bcm2711: Enable V3D
This enables V3D for bcm2711 (used in the Raspberry Pi 4).
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
---
Changes since v1:
- Correct node's name address
arch/arm/boot/dts/bcm2711.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 5026cfc72a2b..db7ef32ad87d 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -549,6 +549,18 @@ genet_mdio: mdio@e14 {
#size-cells = <0x1>;
};
};
+
+ v3d: gpu@...00000 {
+ compatible = "brcm,bcm2711-v3d";
+ reg = <0x0 0x7ec00000 0x4000>,
+ <0x0 0x7ec04000 0x4000>;
+ reg-names = "hub", "core0";
+
+ power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
+ resets = <&pm BCM2835_RESET_V3D>;
+ clocks = <&firmware_clocks 5>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
};
--
2.30.0
Powered by blists - more mailing lists