linux-kernel - [PATCH v2 05/12] arm64: dts: marvell: armada-3720-db: add comphy references

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210210140949.32515-6-kostap@marvell.com>
Date:   Wed, 10 Feb 2021 16:09:42 +0200
From:   <kostap@...vell.com>
To:     <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>
CC:     <linux@...linux.org.uk>, <robh+dt@...nel.org>,
        <sebastian.hesselbarth@...il.com>, <gregory.clement@...tlin.com>,
        <andrew@...n.ch>, <mw@...ihalf.com>, <jaz@...ihalf.com>,
        <nadavh@...vell.com>, <stefanc@...vell.com>, <bpeled@...vell.com>,
        "Konstantin Porotchkin" <kostap@...vell.com>
Subject: [PATCH v2 05/12] arm64: dts: marvell: armada-3720-db: add comphy references

From: Grzegorz Jaszczyk <jaz@...ihalf.com>

Adding phy description to pcie, sata and usb will allow appropriate drivers
to configure marvell comphy-a3700 accordingly.

Signed-off-by: Grzegorz Jaszczyk <jaz@...ihalf.com>
Signed-off-by: Konstantin Porotchkin <kostap@...vell.com>
---
 arch/arm64/boot/dts/marvell/armada-3720-db.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 3e5789f37206..15e923f945d4 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -132,11 +132,15 @@
 	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
 	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
 	status = "okay";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&comphy1 0>;
 };
 
 /* CON3 */
 &sata {
 	status = "okay";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&comphy2 0>;
 };
 
 &sdhci0 {
@@ -217,4 +221,7 @@
 &usb3 {
 	status = "okay";
 	usb-phy = <&usb3_phy>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&comphy0 0>;
+	phy-names = "usb";
 };
-- 
2.17.1