linux-kernel - Re: [PATCH v2 1/2] dt-bindings: phy: add Amlogic G12A Analog MIPI D-PHY bindings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1612975160.340384.2293397.nullmailer@robh.at.kernel.org>
Date:   Wed, 10 Feb 2021 10:39:20 -0600
From:   Rob Herring <robh@...nel.org>
To:     Neil Armstrong <narmstrong@...libre.com>
Cc:     linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-amlogic@...ts.infradead.org, kishon@...com, vkoul@...nel.org,
        devicetree@...r.kernel.org
Subject: Re: [PATCH v2 1/2] dt-bindings: phy: add Amlogic G12A Analog MIPI D-PHY bindings

On Wed, 10 Feb 2021 09:07:35 +0100, Neil Armstrong wrote:
> The Amlogic G12A SoCs embeds an Analog MIPI D-PHY to communicate with DSI
> panels, this adds the bindings.
> 
> This Analog D-PHY works with a separate Digital MIPI D-PHY.
> 
> Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
> ---
>  .../phy/amlogic,g12a-mipi-dphy-analog.yaml    | 35 +++++++++++++++++++
>  1 file changed, 35 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.example.dts:22.15-25: Warning (reg_format): /example-0/phy@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.example.dt.yaml: example-0: phy@0:reg:0: [0] is too short
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml

See https://patchwork.ozlabs.org/patch/1438845

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.