lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-ID: <YCR5h73bASurqt5A@lunn.ch> Date: Thu, 11 Feb 2021 01:25:43 +0100 From: Andrew Lunn <andrew@...n.ch> To: Robert Marko <robert.marko@...tura.hr> Cc: agross@...nel.org, bjorn.andersson@...aro.org, robh+dt@...nel.org, linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org, davem@...emloft.net, kuba@...nel.org, netdev@...r.kernel.org, hkallweit1@...il.com, linux@...linux.org.uk, Luka Perkov <luka.perkov@...tura.hr> Subject: Re: [PATCH v2 net-next 1/4] dt-bindings: net: Add QCA807x PHY On Wed, Feb 10, 2021 at 01:55:20PM +0100, Robert Marko wrote: > Add DT bindings for Qualcomm QCA807x PHY series. > > Signed-off-by: Robert Marko <robert.marko@...tura.hr> > Cc: Luka Perkov <luka.perkov@...tura.hr> > --- > Changes in v2: > * Drop PSGMII/QSGMII TX driver defines > > include/dt-bindings/net/qcom-qca807x.h | 30 ++++++++++++++++++++++++++ > 1 file changed, 30 insertions(+) > create mode 100644 include/dt-bindings/net/qcom-qca807x.h > > diff --git a/include/dt-bindings/net/qcom-qca807x.h b/include/dt-bindings/net/qcom-qca807x.h > new file mode 100644 > index 000000000000..a5ac12777c2b > --- /dev/null > +++ b/include/dt-bindings/net/qcom-qca807x.h > @@ -0,0 +1,30 @@ > +/* SPDX-License-Identifier: GPL-2.0-or-later */ > +/* > + * Device Tree constants for the Qualcomm QCA807X PHYs > + */ > + > +#ifndef _DT_BINDINGS_QCOM_QCA807X_H > +#define _DT_BINDINGS_QCOM_QCA807X_H > + > +/* Full amplitude, full bias current */ > +#define QCA807X_CONTROL_DAC_FULL_VOLT_BIAS 0 > +/* Amplitude follow DSP (amplitude is adjusted based on cable length), half bias current */ > +#define QCA807X_CONTROL_DAC_DSP_VOLT_HALF_BIAS 1 > +/* Full amplitude, bias current follow DSP (bias current is adjusted based on cable length) */ > +#define QCA807X_CONTROL_DAC_FULL_VOLT_DSP_BIAS 2 > +/* Both amplitude and bias current follow DSP */ > +#define QCA807X_CONTROL_DAC_DSP_VOLT_BIAS 3 > +/* Full amplitude, half bias current */ > +#define QCA807X_CONTROL_DAC_FULL_VOLT_HALF_BIAS 4 > +/* Amplitude follow DSP setting; 1/4 bias current when cable<10m, > + * otherwise half bias current > + */ > +#define QCA807X_CONTROL_DAC_DSP_VOLT_QUARTER_BIAS 5 > +/* Full amplitude; same bias current setting with “010” and “011”, > + * but half more bias is reduced when cable <10m > + */ > +#define QCA807X_CONTROL_DAC_FULL_VOLT_HALF_BIAS_SHORT 6 > +/* Amplitude follow DSP; same bias current setting with “110”, default value */ > +#define QCA807X_CONTROL_DAC_DSP_VOLT_HALF_BIAS_SHORT 7 Are these really properties of the board? That is what device tree is supposed to be about. These seem like configuration options. Which suggests they should actually be a PHY tunable. Andrew
Powered by blists - more mailing lists