Message-ID: <20210211123353.78963-4-alexandru.ardelean@analog.com>
Date:   Thu, 11 Feb 2021 14:33:53 +0200
From:   Alexandru Ardelean <alexandru.ardelean@...log.com>
To:     <linux-kernel@...r.kernel.org>, <linux-iio@...r.kernel.org>
CC:     <lars@...afoo.de>, <Michael.Hennerich@...log.com>,
        <jic23@...nel.org>, <nuno.sa@...log.com>,
        <dragos.bogdan@...log.com>,
        Alexandru Ardelean <alexandru.ardelean@...log.com>
Subject: [PATCH 3/3] tools: iio: add example for high-speed buffer support

Following a recent update to the IIO buffer infrastructure, this change
adds a basic example on how to access an IIO buffer via the new mmap()
interface.

The ioctl() for the high-speed mode needs to be enabled right from the
start, before setting any parameters via sysfs (length, enable, etc), to
make sure that the mmap mode is used and not the fileio mode.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@...log.com>
---
 tools/iio/iio_generic_buffer.c | 184 +++++++++++++++++++++++++++++++--
 1 file changed, 178 insertions(+), 6 deletions(-)

diff --git a/tools/iio/iio_generic_buffer.c b/tools/iio/iio_generic_buffer.c
index fdd08514d556..af1a944edcdb 100644
--- a/tools/iio/iio_generic_buffer.c
+++ b/tools/iio/iio_generic_buffer.c
@@ -31,6 +31,7 @@
 #include <stdbool.h>
 #include <signal.h>
 #include <sys/ioctl.h>
+#include <sys/mman.h>
 #include <linux/iio/buffer.h>
 #include "iio_utils.h"
 
@@ -239,6 +240,133 @@ static int enable_disable_all_channels(char *dev_dir_name, int buffer_idx, int e
 	return 0;
 }
 
+struct mmap_block {
+	struct iio_buffer_block block;
+	void *addr;
+};
+
+static struct mmap_block *enable_high_speed(int buf_fd, unsigned int block_size,
+					    int nblocks)
+{
+	struct iio_buffer_block_alloc_req req = { 0 };
+	struct mmap_block *mmaps = NULL;
+	int mmaps_cnt = 0;
+	int i, ret;
+
+	/**
+	 * Validate we can do high-speed by issuing BLOCK_FREE ioctl.
+	 * If using just BLOCK_ALLOC it's distinguish between ENOSYS
+	 * and other error types.
+	 */
+	ret = ioctl(buf_fd, IIO_BUFFER_BLOCK_FREE_IOCTL, 0);
+	if (ret < 0) {
+		errno = ENOSYS;
+		return NULL;
+	}
+
+	/* for now, this */
+	req.id = 0;
+	req.type = 0;
+	req.size = block_size;
+	req.count = nblocks;
+
+	ret = ioctl(buf_fd, IIO_BUFFER_BLOCK_ALLOC_IOCTL, &req);
+	if (ret < 0)
+		return NULL;
+
+	if (req.count == 0) {
+		errno = ENOMEM;
+		return NULL;
+	}
+
+	if (req.count < nblocks) {
+		fprintf(stderr, "Requested %d blocks, got %d\n",
+			nblocks, req.count);
+		errno = ENOMEM;
+		return NULL;
+	}
+
+	mmaps = calloc(req.count, sizeof(*mmaps));
+	if (!mmaps) {
+		errno = ENOMEM;
+		return NULL;
+	}
+
+	for (i = 0; i < req.count; i++) {
+		mmaps[i].block.id = i;
+		ret = ioctl(buf_fd, IIO_BUFFER_BLOCK_QUERY_IOCTL, &mmaps[i].block);
+		if (ret < 0)
+			goto error;
+
+		ret = ioctl(buf_fd, IIO_BUFFER_BLOCK_ENQUEUE_IOCTL, &mmaps[i].block);
+		if (ret < 0)
+			goto error;
+
+		mmaps[i].addr = mmap(0, mmaps[i].block.size,
+				      PROT_READ | PROT_WRITE, MAP_SHARED,
+				      buf_fd, mmaps[i].block.data.offset);
+
+		if (mmaps[i].addr == MAP_FAILED)
+			goto error;
+
+		mmaps_cnt++;
+	}
+
+	return mmaps;
+
+error:
+	for (i = 0; i < mmaps_cnt; i++)
+		munmap(mmaps[i].addr, mmaps[i].block.size);
+	free(mmaps);
+	return NULL;
+}
+
+static int read_high_speed(int buf_fd, char *data, unsigned int block_size,
+			   struct mmap_block *mmaps, unsigned int mmaps_cnt)
+{
+	struct iio_buffer_block block;
+	int ret;
+
+	/**
+	 * This is where some buffer-pool management can do wonders,
+	 * but for the sake of this sample-code, we're just going to
+	 * copy the data and re-enqueue it back
+	 */
+	memset(&block, 0, sizeof(block));
+	ret = ioctl(buf_fd, IIO_BUFFER_BLOCK_DEQUEUE_IOCTL, &block);
+	if (ret < 0)
+		return ret;
+
+	/* check for weird conditions */
+	if (block.bytes_used > block_size) {
+		fprintf(stderr,
+			"Got a bigger block (%u) than expected (%u)\n",
+			block.bytes_used, block_size);
+		return -EFBIG;
+	}
+
+	if (block.bytes_used < block_size) {
+		/**
+		 * This can be normal, with some real-world data
+		 * terminating abruptly. But log it.
+		 */
+		fprintf(stderr,
+			"Got a smaller block (%u) than expected (%u)\n",
+			block.bytes_used, block_size);
+	}
+
+	/* memcpy() the data, we lose some more performance here :p */
+	memcpy(data, mmaps[block.id].addr, block.bytes_used);
+
+	/* and re-queue this back */
+	ret = ioctl(buf_fd, IIO_BUFFER_BLOCK_ENQUEUE_IOCTL, &mmaps[block.id].block);
+	if (ret < 0)
+		return ret;
+
+	return block.bytes_used;
+}
+
+
 static void print_usage(void)
 {
 	fprintf(stderr, "Usage: generic_buffer [options]...\n"
@@ -249,6 +377,7 @@ static void print_usage(void)
 		"  -c <n>     Do n conversions, or loop forever if n < 0\n"
 		"  -e         Disable wait for event (new data)\n"
 		"  -g         Use trigger-less mode\n"
+		"  -h         Use high-speed buffer access\n"
 		"  -l <n>     Set buffer length to n samples\n"
 		"  --device-name -n <name>\n"
 		"  --device-num -N <num>\n"
@@ -356,9 +485,15 @@ int main(int argc, char **argv)
 
 	struct iio_channel_info *channels = NULL;
 
+	static bool use_high_speed = false;
+	unsigned int block_size;
+	int nblocks = 16; /* default */
+	int mmaps_cnt = 0;
+	struct mmap_block *mmaps = NULL;
+
 	register_cleanup();
 
-	while ((c = getopt_long(argc, argv, "aAb:c:egl:n:N:t:T:w:?", longopts,
+	while ((c = getopt_long(argc, argv, "aAb:c:eghl:n:N:t:T:w:?", longopts,
 				NULL)) != -1) {
 		switch (c) {
 		case 'a':
@@ -396,6 +531,9 @@ int main(int argc, char **argv)
 		case 'g':
 			notrigger = 1;
 			break;
+		case 'h':
+			use_high_speed = true;
+			break;
 		case 'l':
 			errno = 0;
 			buf_len = strtoul(optarg, &dummy, 10);
@@ -661,6 +799,29 @@ int main(int argc, char **argv)
 		goto error;
 	}
 
+	scan_size = size_from_channelarray(channels, num_channels);
+	block_size = scan_size * buf_len;
+	/**
+	 * Need to enable high-speed before configuring length/enable.
+	 * Otherwise, the DMA buffer will work in fileio mode,
+	 * and mmap won't work.
+	 */
+	if (use_high_speed) {
+		/**
+		 * The block_size for one block is the same as 'data', but it
+		 * doesn't need to be the same size. It is easier for the sake
+		 * of this example.
+		 */
+		mmaps = enable_high_speed(buf_fd, block_size, nblocks);
+		if (!mmaps) {
+			fprintf(stderr, "Could not enable high-speed mode\n");
+			ret = -errno;
+			goto error;
+		}
+		mmaps_cnt = nblocks;
+		printf("Using high-speed mode\n");
+	}
+
 	/* Setup ring buffer parameters */
 	ret = write_sysfs_int("length", buf_dir_name, buf_len);
 	if (ret < 0)
@@ -675,8 +836,7 @@ int main(int argc, char **argv)
 		goto error;
 	}
 
-	scan_size = size_from_channelarray(channels, num_channels);
-	data = malloc(scan_size * buf_len);
+	data = malloc(block_size);
 	if (!data) {
 		ret = -ENOMEM;
 		goto error;
@@ -719,7 +879,13 @@ int main(int argc, char **argv)
 			toread = 64;
 		}
 
-		read_size = read(buf_fd, data, toread * scan_size);
+		if (use_high_speed) {
+			read_size = read_high_speed(buf_fd, data, block_size,
+						    mmaps, mmaps_cnt);
+		} else {
+			read_size = read(buf_fd, data, toread * scan_size);
+		}
+
 		if (read_size < 0) {
 			if (errno == EAGAIN) {
 				fprintf(stderr, "nothing available\n");
@@ -738,8 +904,14 @@ int main(int argc, char **argv)
 
 	if (fd >= 0 && close(fd) == -1)
 		perror("Failed to close character device");
-	if (buf_fd >= 0 && close(buf_fd) == -1)
-		perror("Failed to close buffer");
+	for (i = 0; i < mmaps_cnt; i++)
+		munmap(mmaps[i].addr, mmaps[i].block.size);
+	free(mmaps);
+	if (buf_fd >= 0) {
+		ioctl(buf_fd, IIO_BUFFER_BLOCK_FREE_IOCTL, 0);
+		if (close(buf_fd) == -1)
+			perror("Failed to close buffer");
+	}
 	free(buffer_access);
 	free(data);
 	free(buf_dir_name);
-- 
2.17.1

Powered by blists - more mailing lists