| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ffa00a2bf83ffa21ffdc61b380ab800c31f8cf28.camel@microchip.com>
Date: Fri, 12 Feb 2021 14:05:35 +0100
From: Steen Hegelund <steen.hegelund@...rochip.com>
To: Kishon Vijay Abraham I <kishon@...com>,
Vinod Koul <vkoul@...nel.org>
CC: Alexandre Belloni <alexandre.belloni@...tlin.com>,
Lars Povlsen <lars.povlsen@...rochip.com>,
Bjarni Jonasson <bjarni.jonasson@...rochip.com>,
Microchip UNG Driver List <UNGLinuxDriver@...rochip.com>,
<netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Andrew Lunn <andrew@...n.ch>
Subject: Re: [PATCH v14 2/4] phy: Add media type and speed serdes
configuration interfaces
Hi Kishon,
On Fri, 2021-02-12 at 17:02 +0530, Kishon Vijay Abraham I wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you
> know the content is safe
>
> Hi Steen,
>
> On 10/02/21 2:22 pm, Steen Hegelund wrote:
> > Provide new phy configuration interfaces for media type and speed
> > that
> > allows allows e.g. PHYs used for ethernet to be configured with
> > this
> > information.
> >
> > Signed-off-by: Lars Povlsen <lars.povlsen@...rochip.com>
> > Signed-off-by: Steen Hegelund <steen.hegelund@...rochip.com>
> > Reviewed-by: Andrew Lunn <andrew@...n.ch>
> > Reviewed-by: Alexandre Belloni <alexandre.belloni@...tlin.com>
> > ---
> > drivers/phy/phy-core.c | 30 ++++++++++++++++++++++++++++++
> > include/linux/phy/phy.h | 26 ++++++++++++++++++++++++++
> > 2 files changed, 56 insertions(+)
> >
> > diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
> > index 71cb10826326..ccb575b13777 100644
> > --- a/drivers/phy/phy-core.c
> > +++ b/drivers/phy/phy-core.c
> > @@ -373,6 +373,36 @@ int phy_set_mode_ext(struct phy *phy, enum
> > phy_mode mode, int submode)
> > }
> > EXPORT_SYMBOL_GPL(phy_set_mode_ext);
> >
> > +int phy_set_media(struct phy *phy, enum phy_media media)
> > +{
> > + int ret;
> > +
> > + if (!phy || !phy->ops->set_media)
> > + return 0;
> > +
> > + mutex_lock(&phy->mutex);
> > + ret = phy->ops->set_media(phy, media);
> > + mutex_unlock(&phy->mutex);
> > +
> > + return ret;
> > +}
> > +EXPORT_SYMBOL_GPL(phy_set_media);
> > +
> > +int phy_set_speed(struct phy *phy, int speed)
> > +{
> > + int ret;
> > +
> > + if (!phy || !phy->ops->set_speed)
> > + return 0;
> > +
> > + mutex_lock(&phy->mutex);
> > + ret = phy->ops->set_speed(phy, speed);
> > + mutex_unlock(&phy->mutex);
> > +
> > + return ret;
> > +}
> > +EXPORT_SYMBOL_GPL(phy_set_speed);
>
> Can't speed derived from mode? Do we need a separate set_speed
> function?
>
> Thanks
> Kishon
Yes the client will need to be able to choose the speed as needed:
e.g. lower than the serdes mode supports, in case the the media or the
other end is not capable of running that speed.
An example is a 10G and 25G serdes connected via DAC and as there is no
inband autoneg, the 25G client would have to manually select 10G speed
to communicate with its partner.
>
> > +
> > int phy_reset(struct phy *phy)
> > {
> > int ret;
> > diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
> > index e435bdb0bab3..e4fd69a1faa7 100644
> > --- a/include/linux/phy/phy.h
> > +++ b/include/linux/phy/phy.h
> > @@ -44,6 +44,12 @@ enum phy_mode {
> > PHY_MODE_DP
> > };
> >
> > +enum phy_media {
> > + PHY_MEDIA_DEFAULT,
> > + PHY_MEDIA_SR,
> > + PHY_MEDIA_DAC,
> > +};
> > +
> > /**
> > * union phy_configure_opts - Opaque generic phy configuration
> > *
> > @@ -64,6 +70,8 @@ union phy_configure_opts {
> > * @power_on: powering on the phy
> > * @power_off: powering off the phy
> > * @set_mode: set the mode of the phy
> > + * @set_media: set the media type of the phy (optional)
> > + * @set_speed: set the speed of the phy (optional)
> > * @reset: resetting the phy
> > * @calibrate: calibrate the phy
> > * @release: ops to be performed while the consumer relinquishes
> > the PHY
> > @@ -75,6 +83,8 @@ struct phy_ops {
> > int (*power_on)(struct phy *phy);
> > int (*power_off)(struct phy *phy);
> > int (*set_mode)(struct phy *phy, enum phy_mode mode, int
> > submode);
> > + int (*set_media)(struct phy *phy, enum phy_media media);
> > + int (*set_speed)(struct phy *phy, int speed);
> >
> > /**
> > * @configure:
> > @@ -215,6 +225,8 @@ int phy_power_off(struct phy *phy);
> > int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int
> > submode);
> > #define phy_set_mode(phy, mode) \
> > phy_set_mode_ext(phy, mode, 0)
> > +int phy_set_media(struct phy *phy, enum phy_media media);
> > +int phy_set_speed(struct phy *phy, int speed);
> > int phy_configure(struct phy *phy, union phy_configure_opts
> > *opts);
> > int phy_validate(struct phy *phy, enum phy_mode mode, int submode,
> > union phy_configure_opts *opts);
> > @@ -344,6 +356,20 @@ static inline int phy_set_mode_ext(struct phy
> > *phy, enum phy_mode mode,
> > #define phy_set_mode(phy, mode) \
> > phy_set_mode_ext(phy, mode, 0)
> >
> > +static inline int phy_set_media(struct phy *phy, enum phy_media
> > media)
> > +{
> > + if (!phy)
> > + return 0;
> > + return -ENOSYS;
> > +}
> > +
> > +static inline int phy_set_speed(struct phy *phy, int speed)
> > +{
> > + if (!phy)
> > + return 0;
> > + return -ENOSYS;
> > +}
> > +
> > static inline enum phy_mode phy_get_mode(struct phy *phy)
> > {
> > return PHY_MODE_INVALID;
> >
Thanks for your comments.
--
BR
Steen
-=-=-=-=-=-=-=-=-=-=-=-=-=-=
steen.hegelund@...rochip.com
Powered by blists - more mailing lists