| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210215121713.57687-18-marcan@marcan.st>
Date: Mon, 15 Feb 2021 21:17:05 +0900
From: Hector Martin <marcan@...can.st>
To: linux-arm-kernel@...ts.infradead.org
Cc: Hector Martin <marcan@...can.st>, Marc Zyngier <maz@...nel.org>,
Rob Herring <robh@...nel.org>, Arnd Bergmann <arnd@...nel.org>,
Olof Johansson <olof@...om.net>,
Krzysztof Kozlowski <krzk@...nel.org>,
Mark Kettenis <mark.kettenis@...all.nl>,
Tony Lindgren <tony@...mide.com>,
Mohamed Mediouni <mohamed.mediouni@...amail.com>,
Stan Skowronek <stan@...ellium.com>,
Alexander Graf <graf@...zon.com>,
Will Deacon <will@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Mark Rutland <mark.rutland@....com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 17/25] tty: serial: samsung_tty: Separate S3C64XX ops structure
Instead of patching a single global ops structure depending on the port
type, use a separate s3c64xx_serial_ops for the S3C64XX type. This
allows us to mark the structures as const.
Also split out s3c64xx_serial_shutdown into a separate function now that
we have a separate ops structure; this avoids excessive branching
control flow and mirrors s3c64xx_serial_startup. tx_claimed and
rx_claimed are only used in the S3C24XX functions.
Signed-off-by: Hector Martin <marcan@...can.st>
---
drivers/tty/serial/samsung_tty.c | 69 ++++++++++++++++++++++++--------
1 file changed, 53 insertions(+), 16 deletions(-)
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 8ae3e03fbd8c..6b661f3ec1ae 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -1098,27 +1098,36 @@ static void s3c24xx_serial_shutdown(struct uart_port *port)
struct s3c24xx_uart_port *ourport = to_ourport(port);
if (ourport->tx_claimed) {
- if (!s3c24xx_serial_has_interrupt_mask(port))
- free_irq(ourport->tx_irq, ourport);
+ free_irq(ourport->tx_irq, ourport);
ourport->tx_enabled = 0;
ourport->tx_claimed = 0;
ourport->tx_mode = 0;
}
if (ourport->rx_claimed) {
- if (!s3c24xx_serial_has_interrupt_mask(port))
- free_irq(ourport->rx_irq, ourport);
+ free_irq(ourport->rx_irq, ourport);
ourport->rx_claimed = 0;
ourport->rx_enabled = 0;
}
- /* Clear pending interrupts and mask all interrupts */
- if (s3c24xx_serial_has_interrupt_mask(port)) {
- free_irq(port->irq, ourport);
+ if (ourport->dma)
+ s3c24xx_serial_release_dma(ourport);
- wr_regl(port, S3C64XX_UINTP, 0xf);
- wr_regl(port, S3C64XX_UINTM, 0xf);
- }
+ ourport->tx_in_progress = 0;
+}
+
+static void s3c64xx_serial_shutdown(struct uart_port *port)
+{
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
+
+ free_irq(port->irq, ourport);
+
+ wr_regl(port, S3C64XX_UINTP, 0xf);
+ wr_regl(port, S3C64XX_UINTM, 0xf);
+
+ ourport->tx_enabled = 0;
+ ourport->tx_mode = 0;
+ ourport->rx_enabled = 0;
if (ourport->dma)
s3c24xx_serial_release_dma(ourport);
@@ -1193,9 +1202,7 @@ static int s3c64xx_serial_startup(struct uart_port *port)
/* For compatibility with s3c24xx Soc's */
ourport->rx_enabled = 1;
- ourport->rx_claimed = 1;
ourport->tx_enabled = 0;
- ourport->tx_claimed = 1;
spin_lock_irqsave(&port->lock, flags);
@@ -1631,6 +1638,29 @@ static struct uart_ops s3c24xx_serial_ops = {
#endif
};
+static const struct uart_ops s3c64xx_serial_ops = {
+ .pm = s3c24xx_serial_pm,
+ .tx_empty = s3c24xx_serial_tx_empty,
+ .get_mctrl = s3c24xx_serial_get_mctrl,
+ .set_mctrl = s3c24xx_serial_set_mctrl,
+ .stop_tx = s3c24xx_serial_stop_tx,
+ .start_tx = s3c24xx_serial_start_tx,
+ .stop_rx = s3c24xx_serial_stop_rx,
+ .break_ctl = s3c24xx_serial_break_ctl,
+ .startup = s3c64xx_serial_startup,
+ .shutdown = s3c64xx_serial_shutdown,
+ .set_termios = s3c24xx_serial_set_termios,
+ .type = s3c24xx_serial_type,
+ .release_port = s3c24xx_serial_release_port,
+ .request_port = s3c24xx_serial_request_port,
+ .config_port = s3c24xx_serial_config_port,
+ .verify_port = s3c24xx_serial_verify_port,
+#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
+ .poll_get_char = s3c24xx_serial_get_poll_char,
+ .poll_put_char = s3c24xx_serial_put_poll_char,
+#endif
+};
+
static struct uart_driver s3c24xx_uart_drv = {
.owner = THIS_MODULE,
.driver_name = "s3c2410_serial",
@@ -1868,10 +1898,6 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
/* setup info for port */
port->dev = &platdev->dev;
- /* Startup sequence is different for s3c64xx and higher SoC's */
- if (s3c24xx_serial_has_interrupt_mask(port))
- s3c24xx_serial_ops.startup = s3c64xx_serial_startup;
-
port->uartclk = 1;
if (cfg->uart_flags & UPF_CONS_FLOW) {
@@ -2019,6 +2045,17 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
dev_get_platdata(&pdev->dev) :
ourport->drv_data->def_cfg;
+ switch (ourport->info->type) {
+ case PORT_S3C2410:
+ case PORT_S3C2412:
+ case PORT_S3C2440:
+ ourport->port.ops = &s3c24xx_serial_ops;
+ break;
+ case PORT_S3C6400:
+ ourport->port.ops = &s3c64xx_serial_ops;
+ break;
+ }
+
if (np) {
of_property_read_u32(np,
"samsung,uart-fifosize", &ourport->port.fifosize);
--
2.30.0
Powered by blists - more mailing lists