[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CA+G9fYtDdZy=aNnB=8eQA2_h8bOtyFuizfbJzcj3OGcqJuM-Gg@mail.gmail.com>
Date: Tue, 16 Feb 2021 18:04:29 +0530
From: Naresh Kamboju <naresh.kamboju@...aro.org>
To: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@...hiba.co.jp>
Cc: "David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...com>,
Jose Abreu <joabreu@...opsys.com>,
Leon Romanovsky <leon@...nel.org>,
Arnd Bergmann <arnd@...nel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>, Netdev <netdev@...r.kernel.org>,
punit1.agrawal@...hiba.co.jp, yuji2.ishikawa@...hiba.co.jp,
Linux ARM <linux-arm-kernel@...ts.infradead.org>,
open list <linux-kernel@...r.kernel.org>,
lkft-triage@...ts.linaro.org
Subject: Re: [PATCH v4 4/4] arm: dts: visconti: Add DT support for Toshiba
Visconti5 ethernet controller
Hi Nobuhiro,
On Mon, 15 Feb 2021 at 21:00, Nobuhiro Iwamatsu
<nobuhiro1.iwamatsu@...hiba.co.jp> wrote:
>
> Add the ethernet controller node in Toshiba Visconti5 SoC-specific DT file.
> And enable this node in TMPV7708 RM main board's board-specific DT file.
>
> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@...hiba.co.jp>
> ---
> .../boot/dts/toshiba/tmpv7708-rm-mbrc.dts | 18 +++++++++++++
> arch/arm64/boot/dts/toshiba/tmpv7708.dtsi | 25 +++++++++++++++++++
> 2 files changed, 43 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
> index ed0bf7f13f54..48fa8776e36f 100644
> --- a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
> +++ b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
> @@ -41,3 +41,21 @@ &uart1 {
> clocks = <&uart_clk>;
> clock-names = "apb_pclk";
> };
> +
> +&piether {
> + status = "okay";
> + phy-handle = <&phy0>;
> + phy-mode = "rgmii-id";
> + clocks = <&clk300mhz>, <&clk125mhz>;
> + clock-names = "stmmaceth", "phy_ref_clk";
> +
> + mdio0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dwmac-mdio";
> + phy0: ethernet-phy@1 {
> + device_type = "ethernet-phy";
> + reg = <0x1>;
This build error was noticed on LKFT builder while building arm64 dtb
on linux next 20210216 tag.
arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts:52.3-4 syntax error
FATAL ERROR: Unable to parse input tree
Reported-by: Naresh Kamboju <naresh.kamboju@...aro.org>
https://gitlab.com/Linaro/lkft/mirrors/next/linux-next/-/jobs/1033072509#L382
--
Linaro LKFT
https://lkft.linaro.org
Powered by blists - more mailing lists