[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210216174146.106639-3-jacopo+renesas@jmondi.org>
Date: Tue, 16 Feb 2021 18:41:32 +0100
From: Jacopo Mondi <jacopo+renesas@...ndi.org>
To: kieran.bingham+renesas@...asonboard.com,
laurent.pinchart+renesas@...asonboard.com,
niklas.soderlund+renesas@...natech.se, geert@...ux-m68k.org
Cc: Jacopo Mondi <jacopo+renesas@...ndi.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
linux-media@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 02/16] media: i2c: rdacm20: Embedded 'serializer' field
There's no reason to allocate dynamically the 'serializer' field in
the driver structure.
Embed the field and adjust all its users in the driver.
Signed-off-by: Jacopo Mondi <jacopo+renesas@...ndi.org>
---
drivers/media/i2c/rdacm20.c | 38 ++++++++++++++++---------------------
1 file changed, 16 insertions(+), 22 deletions(-)
diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c
index f7fd5ae955d0..4d9bac87cba8 100644
--- a/drivers/media/i2c/rdacm20.c
+++ b/drivers/media/i2c/rdacm20.c
@@ -312,7 +312,7 @@ static const struct ov10635_reg {
struct rdacm20_device {
struct device *dev;
- struct max9271_device *serializer;
+ struct max9271_device serializer;
struct i2c_client *sensor;
struct v4l2_subdev sd;
struct media_pad pad;
@@ -399,7 +399,7 @@ static int rdacm20_s_stream(struct v4l2_subdev *sd, int enable)
{
struct rdacm20_device *dev = sd_to_rdacm20(sd);
- return max9271_set_serial_link(dev->serializer, enable);
+ return max9271_set_serial_link(&dev->serializer, enable);
}
static int rdacm20_enum_mbus_code(struct v4l2_subdev *sd,
@@ -456,11 +456,11 @@ static int rdacm20_initialize(struct rdacm20_device *dev)
int ret;
/* Verify communication with the MAX9271: ping to wakeup. */
- dev->serializer->client->addr = MAX9271_DEFAULT_ADDR;
- i2c_smbus_read_byte(dev->serializer->client);
+ dev->serializer.client->addr = MAX9271_DEFAULT_ADDR;
+ i2c_smbus_read_byte(dev->serializer.client);
/* Serial link disabled during config as it needs a valid pixel clock. */
- ret = max9271_set_serial_link(dev->serializer, false);
+ ret = max9271_set_serial_link(&dev->serializer, false);
if (ret)
return ret;
@@ -468,35 +468,35 @@ static int rdacm20_initialize(struct rdacm20_device *dev)
* Ensure that we have a good link configuration before attempting to
* identify the device.
*/
- max9271_configure_i2c(dev->serializer, MAX9271_I2CSLVSH_469NS_234NS |
- MAX9271_I2CSLVTO_1024US |
- MAX9271_I2CMSTBT_105KBPS);
+ max9271_configure_i2c(&dev->serializer, MAX9271_I2CSLVSH_469NS_234NS |
+ MAX9271_I2CSLVTO_1024US |
+ MAX9271_I2CMSTBT_105KBPS);
- max9271_configure_gmsl_link(dev->serializer);
+ max9271_configure_gmsl_link(&dev->serializer);
- ret = max9271_verify_id(dev->serializer);
+ ret = max9271_verify_id(&dev->serializer);
if (ret < 0)
return ret;
- ret = max9271_set_address(dev->serializer, dev->addrs[0]);
+ ret = max9271_set_address(&dev->serializer, dev->addrs[0]);
if (ret < 0)
return ret;
- dev->serializer->client->addr = dev->addrs[0];
+ dev->serializer.client->addr = dev->addrs[0];
/*
* Reset the sensor by cycling the OV10635 reset signal connected to the
* MAX9271 GPIO1 and verify communication with the OV10635.
*/
- ret = max9271_enable_gpios(dev->serializer, MAX9271_GPIO1OUT);
+ ret = max9271_enable_gpios(&dev->serializer, MAX9271_GPIO1OUT);
if (ret)
return ret;
- ret = max9271_clear_gpios(dev->serializer, MAX9271_GPIO1OUT);
+ ret = max9271_clear_gpios(&dev->serializer, MAX9271_GPIO1OUT);
if (ret)
return ret;
usleep_range(10000, 15000);
- ret = max9271_set_gpios(dev->serializer, MAX9271_GPIO1OUT);
+ ret = max9271_set_gpios(&dev->serializer, MAX9271_GPIO1OUT);
if (ret)
return ret;
usleep_range(10000, 15000);
@@ -560,13 +560,7 @@ static int rdacm20_probe(struct i2c_client *client)
if (!dev)
return -ENOMEM;
dev->dev = &client->dev;
-
- dev->serializer = devm_kzalloc(&client->dev, sizeof(*dev->serializer),
- GFP_KERNEL);
- if (!dev->serializer)
- return -ENOMEM;
-
- dev->serializer->client = client;
+ dev->serializer.client = client;
ret = of_property_read_u32_array(client->dev.of_node, "reg",
dev->addrs, 2);
--
2.30.0
Powered by blists - more mailing lists