linux-kernel - [PATCH 12/16] media: i2c: max9286: Define high channel amplitude

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210216174146.106639-13-jacopo+renesas@jmondi.org>
Date:   Tue, 16 Feb 2021 18:41:42 +0100
From:   Jacopo Mondi <jacopo+renesas@...ndi.org>
To:     kieran.bingham+renesas@...asonboard.com,
        laurent.pinchart+renesas@...asonboard.com,
        niklas.soderlund+renesas@...natech.se, geert@...ux-m68k.org
Cc:     Jacopo Mondi <jacopo+renesas@...ndi.org>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        linux-media@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH 12/16] media: i2c: max9286: Define high channel amplitude

Provide a macro to define the reverse channel amplitude to
be used to compensate the remote serializer noise immunity.

While at it, update a comment.

Signed-off-by: Jacopo Mondi <jacopo+renesas@...ndi.org>
---
 drivers/media/i2c/max9286.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
index 4afb5ca06448..7913b5f2249e 100644
--- a/drivers/media/i2c/max9286.c
+++ b/drivers/media/i2c/max9286.c
@@ -113,6 +113,7 @@
 #define MAX9286_REV_TRF(n)		((n) << 4)
 #define MAX9286_REV_AMP(n)		((((n) - 30) / 10) << 1) /* in mV */
 #define MAX9286_REV_AMP_X		BIT(0)
+#define MAX9286_REV_AMP_HIGH		170
 /* Register 0x3f */
 #define MAX9286_EN_REV_CFG		BIT(6)
 #define MAX9286_REV_FLEN(n)		((n) - 20)
@@ -566,12 +567,12 @@ static int max9286_notify_bound(struct v4l2_async_notifier *notifier,
 	 * channels:
 	 *
 	 * - Increase the reverse channel amplitude to compensate for the
-	 *   remote ends high threshold, if not done already
+	 *   remote ends high threshold
 	 * - Verify all configuration links are properly detected
 	 * - Disable auto-ack as communication on the control channel are now
 	 *   stable.
 	 */
-	max9286_reverse_channel_setup(priv, 170);
+	max9286_reverse_channel_setup(priv, MAX9286_REV_AMP_HIGH);
 	max9286_check_config_link(priv, priv->source_mask);
 
 	/*
-- 
2.30.0