[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210217080306.157876-1-benjamin.gaignard@collabora.com>
Date: Wed, 17 Feb 2021 09:02:48 +0100
From: Benjamin Gaignard <benjamin.gaignard@...labora.com>
To: ezequiel@...labora.com, p.zabel@...gutronix.de, mchehab@...nel.org,
robh+dt@...nel.org, shawnguo@...nel.org, s.hauer@...gutronix.de,
kernel@...gutronix.de, festevam@...il.com, linux-imx@....com,
gregkh@...uxfoundation.org, mripard@...nel.org,
paul.kocialkowski@...tlin.com, wens@...e.org,
jernej.skrabec@...l.net, krzk@...nel.org, shengjiu.wang@....com,
adrian.ratiu@...labora.com, aisheng.dong@....com, peng.fan@....com,
Anson.Huang@....com, hverkuil-cisco@...all.nl
Cc: linux-media@...r.kernel.org, linux-rockchip@...ts.infradead.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, devel@...verdev.osuosl.org,
kernel@...labora.com,
Benjamin Gaignard <benjamin.gaignard@...labora.com>
Subject: [PATCH v1 00/18] Add HANTRO G2/HEVC decoder support for IMX8MQ
The IMX8MQ got two VPUs but until now only G1 has been enabled.
This series aim to add the second VPU (aka G2) and provide basic
HEVC decoding support.
To be able to decode HEVC it is needed to add/update some of the
structures in the uapi. In addition of them one HANTRO dedicated
control is required to inform the driver of the numbre of bits to skip
at the beginning of the slice header.
The hardware require to allocate few auxiliary buffers to store the
references frame, scaling list or tile size data.
The driver has been tested with fluster test suite stream.
For example with this command: ./fluster.py run -ts JCT-VC-HEVC_V1 -d GStreamer-H.265-V4L2SL-Gst1.0
This series depends of the reset rework posted here: https://www.spinics.net/lists/arm-kernel/msg875766.html
Finally the both VPUs will have a node the device-tree and be
independent from v4l2 point of view.
./v4l2-compliance -m 1
v4l2-compliance 1.21.0-4705, 64 bits, 64-bit time_t
v4l2-compliance SHA: 733f7a54f79d 2021-02-03 08:25:49
Compliance test for hantro-vpu device /dev/media1:
Media Driver Info:
Driver name : hantro-vpu
Model : hantro-vpu
Serial :
Bus info : platform: hantro-vpu
Media version : 5.11.0
Hardware revision: 0x00000000 (0)
Driver version : 5.11.0
Required ioctls:
test MEDIA_IOC_DEVICE_INFO: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/media1 open: OK
test MEDIA_IOC_DEVICE_INFO: OK
test for unlimited opens: OK
Media Controller ioctls:
test MEDIA_IOC_G_TOPOLOGY: OK
Entities: 3 Interfaces: 1 Pads: 4 Links: 4
test MEDIA_IOC_ENUM_ENTITIES/LINKS: OK
test MEDIA_IOC_SETUP_LINK: OK
Total for hantro-vpu device /dev/media1: 8, Succeeded: 8, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for hantro-vpu device /dev/video1:
Driver Info:
Driver name : hantro-vpu
Card type : nxp,imx8mq-vpu-g2-dec
Bus info : platform: hantro-vpu
Driver version : 5.11.0
Capabilities : 0x84204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Media Driver Info:
Driver name : hantro-vpu
Model : hantro-vpu
Serial :
Bus info : platform: hantro-vpu
Media version : 5.11.0
Hardware revision: 0x00000000 (0)
Driver version : 5.11.0
Interface Info:
ID : 0x0300000c
Type : V4L Video
Entity Info:
ID : 0x00000001 (1)
Name : nxp,imx8mq-vpu-g2-dec-source
Function : V4L2 I/O
Pad 0x01000002 : 0: Source
Link 0x02000008: to remote pad 0x1000004 of entity 'nxp,imx8mq-vpu-g2-dec-proc': Data, Enabled, Immutable
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/video1 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 10 Private Controls: 1
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for hantro-vpu device /dev/video1: 46, Succeeded: 46, Failed: 0, Warnings: 0
Grand Total for hantro-vpu device /dev/media1: 54, Succeeded: 54, Failed: 0, Warnings: 0
Benjamin
Benjamin Gaignard (18):
include: media: hevc: Add scaling and decode params controls
media: hantro: Define HEVC codec profiles and supported features
arm64: dts: imx8mq-evk: add reserve memory node for CMA region
media: hevc: add structures for hevc codec
media: controls: Add control for HEVC codec
media: hantro: Make sure that ctx->codex_ops is set
media: hantro: Add a field to distinguish the hardware versions
media: hantro: Add HEVC structures
media: hantro: move hantro_needs_postproc function
media: hantro: Add helper functions for buffer information
media: hantro: Add helper function for auxiliary buffers allocation
media: uapi: Add a control for HANTRO driver
media: hantro: Introduce G2/HEVC decoder
media: hantro: add G2 support to postproc
media: hantro: handle V4L2_PIX_FMT_HEVC_SLICE control
media: hantro: IMX8M: add variant for G2/HEVC codec
dt-bindings: media: nxp,imx8mq-vpu: Update bindings
arm64: dts: imx8mq: Add node to G2 hardware
.../bindings/media/nxp,imx8mq-vpu.yaml | 54 +-
arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 15 +
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 43 +-
drivers/media/v4l2-core/v4l2-ctrls.c | 36 +-
drivers/staging/media/hantro/Makefile | 2 +
drivers/staging/media/hantro/hantro.h | 58 +-
drivers/staging/media/hantro/hantro_drv.c | 110 ++-
.../staging/media/hantro/hantro_g2_hevc_dec.c | 637 ++++++++++++++++++
drivers/staging/media/hantro/hantro_g2_regs.h | 198 ++++++
drivers/staging/media/hantro/hantro_hevc.c | 274 ++++++++
drivers/staging/media/hantro/hantro_hw.h | 50 ++
.../staging/media/hantro/hantro_postproc.c | 52 +-
drivers/staging/media/hantro/hantro_v4l2.c | 3 +-
drivers/staging/media/hantro/imx8m_vpu_hw.c | 95 ++-
drivers/staging/media/sunxi/cedrus/cedrus.c | 6 +
drivers/staging/media/sunxi/cedrus/cedrus.h | 1 +
.../staging/media/sunxi/cedrus/cedrus_dec.c | 2 +
.../staging/media/sunxi/cedrus/cedrus_h265.c | 6 +-
include/media/hevc-ctrls.h | 56 +-
include/uapi/linux/hantro-v4l2-controls.h | 20 +
include/uapi/linux/v4l2-controls.h | 5 +
21 files changed, 1654 insertions(+), 69 deletions(-)
create mode 100644 drivers/staging/media/hantro/hantro_g2_hevc_dec.c
create mode 100644 drivers/staging/media/hantro/hantro_g2_regs.h
create mode 100644 drivers/staging/media/hantro/hantro_hevc.c
create mode 100644 include/uapi/linux/hantro-v4l2-controls.h
--
2.25.1
Powered by blists - more mailing lists