| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <e3a9d7d2-8c01-3b2a-21ed-883cb47a4946@linaro.org>
Date: Thu, 18 Feb 2021 12:45:13 +0300
From: Andrey Konovalov <andrey.konovalov@...aro.org>
To: Jacopo Mondi <jacopo@...ndi.org>
Cc: junak.pub@...il.com, robert.foss@...aro.org,
sakari.ailus@...ux.intel.com, todor.too@...il.com,
agross@...nel.org, bjorn.andersson@...aro.org, mchehab@...nel.org,
laurent.pinchart@...asonboard.com, linux-media@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/3] media: camss: use v4l2_get_link_freq() to
calculate the relevant clocks
Hi Jacopo,
On 18.02.2021 11:07, Jacopo Mondi wrote:
> Hi Andrey,
>
> On Thu, Feb 18, 2021 at 01:11:33AM +0300, Andrey Konovalov wrote:
>> There are places in the camss driver where camss_get_pixel_clock() is
>> called to get the pixel rate (using V4L2_CID_PIXEL_RATE control) and to
>> calculate the link frequency from it. There is a case when this would
>> not work: when V4L2_CID_PIXEL_RATE gets the rate at which the pixels are
>> read (sampled) from the sensor's pixel array, and this rate is different
>> from the pixel transmission rate over the CSI link, the link frequency
>> value can't be calculated from the pixel rate. One needs to use
>> V4L2_CID_LINK_FREQ to get the link frequency in this case.
>>
>> Replace such calls to camss_get_pixel_clock() with calls to a wrapper
>> around v4l2_get_link_freq(). v4l2_get_link_freq() tries V4L2_CID_LINK_FREQ
>> first, and if it is not implemented by the camera sensor driver, falls
>> back to V4L2_CID_PIXEL_RATE to calculate the link frequency value from.
>
> That's nice
>
>>
>> Calls to camss_get_pixel_clock() from vfe_[check,set]_clock_rates()
>> are left intact as it looks like this VFE clock does depend on the
>> rate the pixel samples comes out of the camera sensor, not on the
>> frequency at which the link between the sensor and the CSI receiver
>> operates.
>
> Out of curiosity, you have any idea why this happens ?
Unfortunately no.
There are no any details in the public datasheet on that - just
the formula itself (less than 1 line of text).
> The patch looks good, fwiw given I don't know the platform:
> Reviewed-by: Jacopo Mondi <jacopo@...ndi.org>
Thanks!
-- Andrey
> Thanks
> j
>>
>> Signed-off-by: Andrey Konovalov <andrey.konovalov@...aro.org>
>> Acked-by: Robert Foss <robert.foss@...aro.org>
>> ---
>> .../media/platform/qcom/camss/camss-csid.c | 20 +++++------
>> .../qcom/camss/camss-csiphy-2ph-1-0.c | 22 ++++++------
>> .../qcom/camss/camss-csiphy-3ph-1-0.c | 22 ++++++------
>> .../media/platform/qcom/camss/camss-csiphy.c | 36 +++++++++----------
>> .../media/platform/qcom/camss/camss-csiphy.h | 2 +-
>> drivers/media/platform/qcom/camss/camss.c | 23 ++++++++++++
>> drivers/media/platform/qcom/camss/camss.h | 2 ++
>> 7 files changed, 71 insertions(+), 56 deletions(-)
>>
>> diff --git a/drivers/media/platform/qcom/camss/camss-csid.c b/drivers/media/platform/qcom/camss/camss-csid.c
>> index be3fe76f3dc3..cff9759c9158 100644
>> --- a/drivers/media/platform/qcom/camss/camss-csid.c
>> +++ b/drivers/media/platform/qcom/camss/camss-csid.c
>> @@ -462,13 +462,17 @@ static irqreturn_t csid_isr(int irq, void *dev)
>> static int csid_set_clock_rates(struct csid_device *csid)
>> {
>> struct device *dev = csid->camss->dev;
>> - u32 pixel_clock;
>> + const struct csid_format *fmt;
>> + s64 link_freq;
>> int i, j;
>> int ret;
>>
>> - ret = camss_get_pixel_clock(&csid->subdev.entity, &pixel_clock);
>> - if (ret)
>> - pixel_clock = 0;
>> + fmt = csid_get_fmt_entry(csid->formats, csid->nformats,
>> + csid->fmt[MSM_CSIPHY_PAD_SINK].code);
>> + link_freq = camss_get_link_freq(&csid->subdev.entity, fmt->bpp,
>> + csid->phy.lane_cnt);
>> + if (link_freq < 0)
>> + link_freq = 0;
>>
>> for (i = 0; i < csid->nclocks; i++) {
>> struct camss_clock *clock = &csid->clock[i];
>> @@ -477,13 +481,7 @@ static int csid_set_clock_rates(struct csid_device *csid)
>> !strcmp(clock->name, "csi1") ||
>> !strcmp(clock->name, "csi2") ||
>> !strcmp(clock->name, "csi3")) {
>> - const struct csid_format *f = csid_get_fmt_entry(
>> - csid->formats,
>> - csid->nformats,
>> - csid->fmt[MSM_CSIPHY_PAD_SINK].code);
>> - u8 num_lanes = csid->phy.lane_cnt;
>> - u64 min_rate = pixel_clock * f->bpp /
>> - (2 * num_lanes * 4);
>> + u64 min_rate = link_freq / 4;
>> long rate;
>>
>> camss_add_clock_margin(&min_rate);
>> diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c
>> index 12bce391d71f..30b454c369ab 100644
>> --- a/drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c
>> +++ b/drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c
>> @@ -51,16 +51,13 @@ static void csiphy_reset(struct csiphy_device *csiphy)
>> *
>> * Helper function to calculate settle count value. This is
>> * based on the CSI2 T_hs_settle parameter which in turn
>> - * is calculated based on the CSI2 transmitter pixel clock
>> - * frequency.
>> + * is calculated based on the CSI2 transmitter link frequency.
>> *
>> - * Return settle count value or 0 if the CSI2 pixel clock
>> - * frequency is not available
>> + * Return settle count value or 0 if the CSI2 link frequency
>> + * is not available
>> */
>> -static u8 csiphy_settle_cnt_calc(u32 pixel_clock, u8 bpp, u8 num_lanes,
>> - u32 timer_clk_rate)
>> +static u8 csiphy_settle_cnt_calc(s64 link_freq, u32 timer_clk_rate)
>> {
>> - u32 mipi_clock; /* Hz */
>> u32 ui; /* ps */
>> u32 timer_period; /* ps */
>> u32 t_hs_prepare_max; /* ps */
>> @@ -68,8 +65,10 @@ static u8 csiphy_settle_cnt_calc(u32 pixel_clock, u8 bpp, u8 num_lanes,
>> u32 t_hs_settle; /* ps */
>> u8 settle_cnt;
>>
>> - mipi_clock = pixel_clock * bpp / (2 * num_lanes);
>> - ui = div_u64(1000000000000LL, mipi_clock);
>> + if (link_freq <= 0)
>> + return 0;
>> +
>> + ui = div_u64(1000000000000LL, link_freq);
>> ui /= 2;
>> t_hs_prepare_max = 85000 + 6 * ui;
>> t_hs_prepare_zero_min = 145000 + 10 * ui;
>> @@ -83,15 +82,14 @@ static u8 csiphy_settle_cnt_calc(u32 pixel_clock, u8 bpp, u8 num_lanes,
>>
>> static void csiphy_lanes_enable(struct csiphy_device *csiphy,
>> struct csiphy_config *cfg,
>> - u32 pixel_clock, u8 bpp, u8 lane_mask)
>> + s64 link_freq, u8 lane_mask)
>> {
>> struct csiphy_lanes_cfg *c = &cfg->csi2->lane_cfg;
>> u8 settle_cnt;
>> u8 val, l = 0;
>> int i = 0;
>>
>> - settle_cnt = csiphy_settle_cnt_calc(pixel_clock, bpp, c->num_data,
>> - csiphy->timer_clk_rate);
>> + settle_cnt = csiphy_settle_cnt_calc(link_freq, csiphy->timer_clk_rate);
>>
>> writel_relaxed(0x1, csiphy->base +
>> CAMSS_CSI_PHY_GLBL_T_INIT_CFG0);
>> diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
>> index 97cb9de85031..da7c3d3f9a10 100644
>> --- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
>> +++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
>> @@ -107,24 +107,23 @@ static irqreturn_t csiphy_isr(int irq, void *dev)
>> *
>> * Helper function to calculate settle count value. This is
>> * based on the CSI2 T_hs_settle parameter which in turn
>> - * is calculated based on the CSI2 transmitter pixel clock
>> - * frequency.
>> + * is calculated based on the CSI2 transmitter link frequency.
>> *
>> - * Return settle count value or 0 if the CSI2 pixel clock
>> - * frequency is not available
>> + * Return settle count value or 0 if the CSI2 link frequency
>> + * is not available
>> */
>> -static u8 csiphy_settle_cnt_calc(u32 pixel_clock, u8 bpp, u8 num_lanes,
>> - u32 timer_clk_rate)
>> +static u8 csiphy_settle_cnt_calc(s64 link_freq, u32 timer_clk_rate)
>> {
>> - u32 mipi_clock; /* Hz */
>> u32 ui; /* ps */
>> u32 timer_period; /* ps */
>> u32 t_hs_prepare_max; /* ps */
>> u32 t_hs_settle; /* ps */
>> u8 settle_cnt;
>>
>> - mipi_clock = pixel_clock * bpp / (2 * num_lanes);
>> - ui = div_u64(1000000000000LL, mipi_clock);
>> + if (link_freq <= 0)
>> + return 0;
>> +
>> + ui = div_u64(1000000000000LL, link_freq);
>> ui /= 2;
>> t_hs_prepare_max = 85000 + 6 * ui;
>> t_hs_settle = t_hs_prepare_max;
>> @@ -137,15 +136,14 @@ static u8 csiphy_settle_cnt_calc(u32 pixel_clock, u8 bpp, u8 num_lanes,
>>
>> static void csiphy_lanes_enable(struct csiphy_device *csiphy,
>> struct csiphy_config *cfg,
>> - u32 pixel_clock, u8 bpp, u8 lane_mask)
>> + s64 link_freq, u8 lane_mask)
>> {
>> struct csiphy_lanes_cfg *c = &cfg->csi2->lane_cfg;
>> u8 settle_cnt;
>> u8 val, l = 0;
>> int i;
>>
>> - settle_cnt = csiphy_settle_cnt_calc(pixel_clock, bpp, c->num_data,
>> - csiphy->timer_clk_rate);
>> + settle_cnt = csiphy_settle_cnt_calc(link_freq, csiphy->timer_clk_rate);
>>
>> val = BIT(c->clk.pos);
>> for (i = 0; i < c->num_data; i++)
>> diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.c b/drivers/media/platform/qcom/camss/camss-csiphy.c
>> index 509c9a59c09c..40384d7ca78c 100644
>> --- a/drivers/media/platform/qcom/camss/camss-csiphy.c
>> +++ b/drivers/media/platform/qcom/camss/camss-csiphy.c
>> @@ -102,23 +102,23 @@ static u8 csiphy_get_bpp(const struct csiphy_format *formats,
>> static int csiphy_set_clock_rates(struct csiphy_device *csiphy)
>> {
>> struct device *dev = csiphy->camss->dev;
>> - u32 pixel_clock;
>> + s64 link_freq;
>> int i, j;
>> int ret;
>>
>> - ret = camss_get_pixel_clock(&csiphy->subdev.entity, &pixel_clock);
>> - if (ret)
>> - pixel_clock = 0;
>> + u8 bpp = csiphy_get_bpp(csiphy->formats, csiphy->nformats,
>> + csiphy->fmt[MSM_CSIPHY_PAD_SINK].code);
>> + u8 num_lanes = csiphy->cfg.csi2->lane_cfg.num_data;
>> +
>> + link_freq = camss_get_link_freq(&csiphy->subdev.entity, bpp, num_lanes);
>> + if (link_freq < 0)
>> + link_freq = 0;
>>
>> for (i = 0; i < csiphy->nclocks; i++) {
>> struct camss_clock *clock = &csiphy->clock[i];
>>
>> if (csiphy->rate_set[i]) {
>> - u8 bpp = csiphy_get_bpp(csiphy->formats,
>> - csiphy->nformats,
>> - csiphy->fmt[MSM_CSIPHY_PAD_SINK].code);
>> - u8 num_lanes = csiphy->cfg.csi2->lane_cfg.num_data;
>> - u64 min_rate = pixel_clock * bpp / (2 * num_lanes * 4);
>> + u64 min_rate = link_freq / 4;
>> long round_rate;
>>
>> camss_add_clock_margin(&min_rate);
>> @@ -238,22 +238,18 @@ static u8 csiphy_get_lane_mask(struct csiphy_lanes_cfg *lane_cfg)
>> static int csiphy_stream_on(struct csiphy_device *csiphy)
>> {
>> struct csiphy_config *cfg = &csiphy->cfg;
>> - u32 pixel_clock;
>> + s64 link_freq;
>> u8 lane_mask = csiphy_get_lane_mask(&cfg->csi2->lane_cfg);
>> u8 bpp = csiphy_get_bpp(csiphy->formats, csiphy->nformats,
>> csiphy->fmt[MSM_CSIPHY_PAD_SINK].code);
>> + u8 num_lanes = csiphy->cfg.csi2->lane_cfg.num_data;
>> u8 val;
>> - int ret;
>>
>> - ret = camss_get_pixel_clock(&csiphy->subdev.entity, &pixel_clock);
>> - if (ret) {
>> - dev_err(csiphy->camss->dev,
>> - "Cannot get CSI2 transmitter's pixel clock\n");
>> - return -EINVAL;
>> - }
>> - if (!pixel_clock) {
>> + link_freq = camss_get_link_freq(&csiphy->subdev.entity, bpp, num_lanes);
>> +
>> + if (link_freq < 0) {
>> dev_err(csiphy->camss->dev,
>> - "Got pixel clock == 0, cannot continue\n");
>> + "Cannot get CSI2 transmitter's link frequency\n");
>> return -EINVAL;
>> }
>>
>> @@ -268,7 +264,7 @@ static int csiphy_stream_on(struct csiphy_device *csiphy)
>> writel_relaxed(val, csiphy->base_clk_mux);
>> wmb();
>>
>> - csiphy->ops->lanes_enable(csiphy, cfg, pixel_clock, bpp, lane_mask);
>> + csiphy->ops->lanes_enable(csiphy, cfg, link_freq, lane_mask);
>>
>> return 0;
>> }
>> diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.h b/drivers/media/platform/qcom/camss/camss-csiphy.h
>> index f7967ef836dc..d71b8bc6ec00 100644
>> --- a/drivers/media/platform/qcom/camss/camss-csiphy.h
>> +++ b/drivers/media/platform/qcom/camss/camss-csiphy.h
>> @@ -50,7 +50,7 @@ struct csiphy_hw_ops {
>> void (*reset)(struct csiphy_device *csiphy);
>> void (*lanes_enable)(struct csiphy_device *csiphy,
>> struct csiphy_config *cfg,
>> - u32 pixel_clock, u8 bpp, u8 lane_mask);
>> + s64 link_freq, u8 lane_mask);
>> void (*lanes_disable)(struct csiphy_device *csiphy,
>> struct csiphy_config *cfg);
>> irqreturn_t (*isr)(int irq, void *dev);
>> diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
>> index 7c0f669f8aa6..eb8fb8c34acd 100644
>> --- a/drivers/media/platform/qcom/camss/camss.c
>> +++ b/drivers/media/platform/qcom/camss/camss.c
>> @@ -548,6 +548,29 @@ struct media_entity *camss_find_sensor(struct media_entity *entity)
>> }
>> }
>>
>> +/**
>> + * camss_get_link_freq - Get link frequency from sensor
>> + * @entity: Media entity in the current pipeline
>> + * @bpp: Number of bits per pixel for the current format
>> + * @lanes: Number of lanes in the link to the sensor
>> + *
>> + * Return link frequency on success or a negative error code otherwise
>> + */
>> +s64 camss_get_link_freq(struct media_entity *entity, unsigned int bpp,
>> + unsigned int lanes)
>> +{
>> + struct media_entity *sensor;
>> + struct v4l2_subdev *subdev;
>> +
>> + sensor = camss_find_sensor(entity);
>> + if (!sensor)
>> + return -ENODEV;
>> +
>> + subdev = media_entity_to_v4l2_subdev(sensor);
>> +
>> + return v4l2_get_link_freq(subdev->ctrl_handler, bpp, 2 * lanes);
>> +}
>> +
>> /*
>> * camss_get_pixel_clock - Get pixel clock rate from sensor
>> * @entity: Media entity in the current pipeline
>> diff --git a/drivers/media/platform/qcom/camss/camss.h b/drivers/media/platform/qcom/camss/camss.h
>> index 3a0484683cd6..86cdc25189eb 100644
>> --- a/drivers/media/platform/qcom/camss/camss.h
>> +++ b/drivers/media/platform/qcom/camss/camss.h
>> @@ -108,6 +108,8 @@ int camss_enable_clocks(int nclocks, struct camss_clock *clock,
>> struct device *dev);
>> void camss_disable_clocks(int nclocks, struct camss_clock *clock);
>> struct media_entity *camss_find_sensor(struct media_entity *entity);
>> +s64 camss_get_link_freq(struct media_entity *entity, unsigned int bpp,
>> + unsigned int lanes);
>> int camss_get_pixel_clock(struct media_entity *entity, u32 *pixel_clock);
>> int camss_pm_domain_on(struct camss *camss, int id);
>> void camss_pm_domain_off(struct camss *camss, int id);
>> --
>> 2.17.1
>>
Powered by blists - more mailing lists