| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <d9b589ab82a39b4661a672ecdc161e43@codeaurora.org>
Date: Thu, 18 Feb 2021 21:59:39 +0530
From: mdalam@...eaurora.org
To: Miquel Raynal <miquel.raynal@...tlin.com>
Cc: richard@....at, boris.brezillon@...labora.com, mani@...nel.org,
krzk@...nel.org, linux-mtd@...ts.infradead.org,
linux-kernel@...r.kernel.org, sricharan@...eaurora.org
Subject: Re: [PATCH] mtd: rawnand: qcom: update last code word register
On 2021-02-18 14:50, Miquel Raynal wrote:
> Hello,
>
>> >> >> +/* helper to configure location register values */
>> >> +static void nandc_set_read_loc(struct nand_chip *chip, int cw, int >> reg,
>> >> + int offset, int size, int is_last)
>> >
>> > You know cw, you have access to chip->ecc.steps, so you can derive by
>> > yourself if is_last is set or not. No need to forward it through
>> > function calls.
>>
>>
>> This "is_last" is not for last code word, it will indicate the
>> Location register "NAND_READ_LOCATION_n" last bit.
>
> Ok, I've mixed two things. Let's keep this boolean as it is for now and
> just do the minimum changes to support the LOCATION_LAST_cw registers.
>
> Nevertheless, can't you calculate is_last from nandc_set_read_loc() ?
>
> I also think a bit of renaming (in a different patch) would be welcome
> to avoid such confusions.
>
> Just to be clear: I think you should take a step back, and try to
> simplify a bit this driver. I understand you know every character by
> heart but with an external eye it's not that easy to understand what
> you want to do and why:
> - write small commits with a single, atomic change
> - try to reduce the number of parameters when it is possible
> - try to use meaningful names (is_last vs. LAST_CW)
> - try to avoid extra indentation level when possible
>
>
Sure , I will try to split these changes in multiple patches
and re-pushed again.
> [...]
>
>> >> @@ -1094,11 +1144,19 @@ static void
> config_nand_page_read(struct
>>> qcom_nand_controller *nandc)
>> >> * before reading each codeword in NAND page.
>> >> */
>> >> static void
>> >> -config_nand_cw_read(struct qcom_nand_controller *nandc, bool use_ecc)
>> >> +config_nand_cw_read(struct nand_chip *chip, bool use_ecc, int cw)
>> >> {
>> >> - if (nandc->props->is_bam)
>> >> - write_reg_dma(nandc, NAND_READ_LOCATION_0, 4,
>> >> - NAND_BAM_NEXT_SGL);
>> >> + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
>> >> + struct nand_ecc_ctrl *ecc = &chip->ecc;
>> >> +
>> >> + if (nandc->props->is_bam) {
>> >> + if (nandc->props->qpic_v2 && cw == (ecc->steps - 1))
>> >> + write_reg_dma(nandc, NAND_READ_LOCATION_LAST_CW_0, 4,
>> >> + NAND_BAM_NEXT_SGL);
>> >> + else
>> >> + write_reg_dma(nandc, NAND_READ_LOCATION_0, 4,
>> >> + NAND_BAM_NEXT_SGL);
>> >> + }
>> >
>> > Same here, I am pretty sure we can abstract the complexity.
>> >
>> Here I did this because , i need pointer to struct nand_ecc_ctrl
>> structure
>> to access ecc->steps for CW comparison for last code word. cw ==
>> (ecc->steps - 1)
>>
>> So i think no separate patch needed for conversion of nanc-->chip.
>> Please let me know if still separate patch needed for nanc-->chip
>> conversion.
>
> I was talking about the extra indentation level.
>
> the "qpic_v2 && cv == ..." condition can be checked by write_reg_dma
> directly.
>
> You could even introduce a helper returning the boolean value of which
> register should be used.
>
> Regarding the use of nand_chip instead of nandc, if there are too many
> changes involved, I prefer a separate patch.
I will push separate patch for nandc to chip conversion.
>
>>
>> >> >> write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
>> >> write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
>> >> @@ -1117,11 +1175,11 @@ config_nand_cw_read(struct >> qcom_nand_controller *nandc, bool use_ecc)
>> >> * single codeword in page
>> >> */
>> >> static void
>> >> -config_nand_single_cw_page_read(struct qcom_nand_controller *nandc,
>> >> - bool use_ecc)
>> >> +config_nand_single_cw_page_read(struct nand_chip *chip,
>> >> + bool use_ecc, int cw)
>> >> {
>> >> - config_nand_page_read(nandc);
>> >> - config_nand_cw_read(nandc, use_ecc);
>> >> + config_nand_page_read(chip);
>> >> + config_nand_cw_read(chip, use_ecc, cw);
>> >> }
>> >> >> /*
>> >> @@ -1205,7 +1263,7 @@ static int nandc_param(struct qcom_nand_host >> *host)
>> >> nandc_set_reg(nandc, NAND_DEV_CMD_VLD_RESTORE, nandc->vld);
>> >> }
>> >> >> - nandc_set_read_loc(nandc, 0, 0, 512, 1);
>> >> + nandc_set_read_loc(chip, 0, 0, 0, 512, 1);
>> >> >> if (!nandc->props->qpic_v2) {
>> >> write_reg_dma(nandc, NAND_DEV_CMD_VLD, 1, 0);
>> >> @@ -1215,7 +1273,7 @@ static int nandc_param(struct qcom_nand_host >> *host)
>> >> nandc->buf_count = 512;
>> >> memset(nandc->data_buffer, 0xff, nandc->buf_count);
>> >> >> - config_nand_single_cw_page_read(nandc, false);
>> >> + config_nand_single_cw_page_read(chip, false, 0);
>> >> >> read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer,
>> >> nandc->buf_count, 0);
>> >> @@ -1617,7 +1675,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, >> struct nand_chip *chip,
>> >> clear_bam_transaction(nandc);
>> >> set_address(host, host->cw_size * cw, page);
>> >> update_rw_regs(host, 1, true);
>> >> - config_nand_page_read(nandc);
>> >> + config_nand_page_read(chip);
>> >> >> data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
>> >> oob_size1 = host->bbm_size;
>> >> @@ -1633,19 +1691,19 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, >> struct nand_chip *chip,
>> >> }
>> >> >> if (nandc->props->is_bam) {
>> >> - nandc_set_read_loc(nandc, 0, read_loc, data_size1, 0);
>> >> + nandc_set_read_loc(chip, cw, 0, read_loc, data_size1, 0);
>> >> read_loc += data_size1;
>> >> >> - nandc_set_read_loc(nandc, 1, read_loc, oob_size1, 0);
>> >> + nandc_set_read_loc(chip, cw, 1, read_loc, oob_size1, 0);
>> >> read_loc += oob_size1;
>> >> >> - nandc_set_read_loc(nandc, 2, read_loc, data_size2, 0);
>> >> + nandc_set_read_loc(chip, cw, 2, read_loc, data_size2, 0);
>> >> read_loc += data_size2;
>> >> >> - nandc_set_read_loc(nandc, 3, read_loc, oob_size2, 1);
>> >> + nandc_set_read_loc(chip, cw, 3, read_loc, oob_size2, 1);
>> >> }
>> >> >> - config_nand_cw_read(nandc, false);
>> >> + config_nand_cw_read(chip, false, cw);
>> >> >> read_data_dma(nandc, reg_off, data_buf, data_size1, 0);
>> >> reg_off += data_size1;
>> >> @@ -1856,7 +1914,7 @@ static int read_page_ecc(struct qcom_nand_host >> *host, u8 *data_buf,
>> >> u8 *data_buf_start = data_buf, *oob_buf_start = oob_buf;
>> >> int i, ret;
>> >> >> - config_nand_page_read(nandc);
>> >> + config_nand_page_read(chip);
>> >> >> /* queue cmd descs for each codeword */
>> >> for (i = 0; i < ecc->steps; i++) {
>> >> @@ -1873,18 +1931,16 @@ static int read_page_ecc(struct qcom_nand_host >> *host, u8 *data_buf,
>> >> >> if (nandc->props->is_bam) {
>> >> if (data_buf && oob_buf) {
>> >> - nandc_set_read_loc(nandc, 0, 0, data_size, 0);
>> >> - nandc_set_read_loc(nandc, 1, data_size,
>> >> - oob_size, 1);
>> >> + nandc_set_read_loc(chip, i, 0, 0, data_size, 0);
>> >> + nandc_set_read_loc(chip, i, 1, data_size, oob_size, 1);
>> >> } else if (data_buf) {
>> >> - nandc_set_read_loc(nandc, 0, 0, data_size, 1);
>> >> + nandc_set_read_loc(chip, i, 0, 0, data_size, 1);
>> >> } else {
>> >> - nandc_set_read_loc(nandc, 0, data_size,
>> >> - oob_size, 1);
>> >> + nandc_set_read_loc(chip, i, 0, data_size, oob_size, 1);
>> >> }
>> >> }
>> >> >> - config_nand_cw_read(nandc, true);
>> >> + config_nand_cw_read(chip, true, i);
>> >> >> if (data_buf)
>> >> read_data_dma(nandc, FLASH_BUF_ACC, data_buf,
>> >> @@ -1946,7 +2002,7 @@ static int copy_last_cw(struct qcom_nand_host >> *host, int page)
>> >> set_address(host, host->cw_size * (ecc->steps - 1), page);
>> >> update_rw_regs(host, 1, true);
>> >> >> - config_nand_single_cw_page_read(nandc, host->use_ecc);
>> >> + config_nand_single_cw_page_read(chip, host->use_ecc, ecc->steps - >> 1);
>> >> >> read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, size, 0);
>> >> > > Thanks,
>> > Miquèl
>
> Thanks,
> Miquèl
Powered by blists - more mailing lists