linux-kernel - Re: [PATCH RESEND v3 2/2] ARM: dts: sun4i: Add support for Topwise A721 tablet

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20210219115124.lneiioiksjflbsuo@gilmour>
Date:   Fri, 19 Feb 2021 12:51:24 +0100
From:   Maxime Ripard <maxime@...no.tech>
To:     Pascal Roeleven <dev@...calroeleven.nl>
Cc:     Rob Herring <robh+dt@...nel.org>, Chen-Yu Tsai <wens@...e.org>,
        Jernej Skrabec <jernej.skrabec@...l.net>,
        Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>,
        soc@...nel.org,
        Clément Péron <peron.clem@...il.com>,
        Corentin Labbe <clabbe@...libre.com>,
        Martin Cerveny <m.cerveny@...puter.org>,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com
Subject: Re: [PATCH RESEND v3 2/2] ARM: dts: sun4i: Add support for Topwise
 A721 tablet

Hi,

On Tue, Feb 16, 2021 at 05:59:54PM +0100, Pascal Roeleven wrote:
> The Topwise A721/LY-F1 tablet is a tablet sold around 2012 under
> different brands. The mainboard mentions A721 clearly, so this tablet
> is best known under this name.
> 
> Signed-off-by: Pascal Roeleven <dev@...calroeleven.nl>
> ---
>  arch/arm/boot/dts/Makefile                   |   3 +-
>  arch/arm/boot/dts/sun4i-a10-topwise-a721.dts | 242 +++++++++++++++++++
>  2 files changed, 244 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/boot/dts/sun4i-a10-topwise-a721.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 3d1ea0b251..ba25b4235a 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1103,7 +1103,8 @@ dtb-$(CONFIG_MACH_SUN4I) += \
>  	sun4i-a10-olinuxino-lime.dtb \
>  	sun4i-a10-pcduino.dtb \
>  	sun4i-a10-pcduino2.dtb \
> -	sun4i-a10-pov-protab2-ips9.dtb
> +	sun4i-a10-pov-protab2-ips9.dtb \
> +	sun4i-a10-topwise-a721.dtb
>  dtb-$(CONFIG_MACH_SUN5I) += \
>  	sun5i-a10s-auxtek-t003.dtb \
>  	sun5i-a10s-auxtek-t004.dtb \
> diff --git a/arch/arm/boot/dts/sun4i-a10-topwise-a721.dts b/arch/arm/boot/dts/sun4i-a10-topwise-a721.dts
> new file mode 100644
> index 0000000000..936171d30b
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun4i-a10-topwise-a721.dts
> @@ -0,0 +1,242 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2020 Pascal Roeleven <dev@...calroeleven.nl>
> + */
> +
> +/dts-v1/;
> +#include "sun4i-a10.dtsi"
> +#include "sunxi-common-regulators.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/pwm/pwm.h>
> +
> +/ {
> +	model = "Topwise A721";
> +	compatible = "topwise,a721", "allwinner,sun4i-a10";
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm 0 100000 PWM_POLARITY_INVERTED>;
> +		power-supply = <&reg_vbat>;
> +		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
> +		brightness-levels = <0 30 40 50 60 70 80 90 100>;
> +		default-brightness-level = <8>;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	panel: panel {
> +		compatible = "starry,kr070pe2t";
> +		backlight = <&backlight>;
> +		power-supply = <&reg_lcd_power>;
> +
> +		port {
> +			panel_input: endpoint {
> +				remote-endpoint = <&tcon0_out_panel>;
> +			};
> +		};
> +	};
> +
> +	reg_lcd_power: reg-lcd-power {
> +		compatible = "regulator-fixed";
> +		regulator-name = "reg-lcd-power";
> +		gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
> +		enable-active-high;
> +	};
> +
> +	reg_vbat: reg-vbat {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vbat";
> +		regulator-min-microvolt = <3700000>;
> +		regulator-max-microvolt = <3700000>;
> +	};
> +
> +};
> +
> +&codec {
> +	status = "okay";
> +};
> +
> +&cpu0 {
> +	cpu-supply = <&reg_dcdc2>;
> +};
> +
> +&de {
> +	status = "okay";
> +};
> +
> +&ehci0 {
> +	status = "okay";
> +};
> +
> +&ehci1 {
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	status = "okay";
> +
> +	axp209: pmic@34 {
> +		reg = <0x34>;
> +		interrupts = <0>;
> +	};
> +};
> +
> +#include "axp209.dtsi"
> +
> +&ac_power_supply {
> +	status = "okay";
> +};
> +
> +&battery_power_supply {
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	status = "okay";
> +
> +	mma7660: accelerometer@4c {

Chances are you don't need that label?

> +		compatible = "fsl,mma7660";
> +		reg = <0x4c>;
> +	};
> +};
> +
> +&i2c2 {
> +	status = "okay";
> +
> +	ft5406ee8: touchscreen@38 {

Ditto

> +		compatible = "edt,edt-ft5406";
> +		reg = <0x38>;
> +		interrupt-parent = <&pio>;
> +		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
> +		touchscreen-size-x = <800>;
> +		touchscreen-size-y = <480>;
> +		vcc-supply = <&reg_vcc3v3>;
> +	};
> +};
> +
> +&lradc {
> +	vref-supply = <&reg_ldo2>;
> +	status = "okay";
> +
> +	button-vol-down {
> +		label = "Volume Down";
> +		linux,code = <KEY_VOLUMEDOWN>;
> +		channel = <0>;
> +		voltage = <761904>;
> +	};
> +
> +	button-vol-up {
> +		label = "Volume Up";
> +		linux,code = <KEY_VOLUMEUP>;
> +		channel = <0>;
> +		voltage = <571428>;
> +	};

Those two nodes will raise a warning during the DT validation, please
make sure it doesn't have any warning.

Maxime

Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)