| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 20 Feb 2021 15:34:52 +0900
From: Chanwoo Choi <cwchoi00@...il.com>
To: Guru Das Srinagesh <gurus@...eaurora.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
linux-arm-msm@...r.kernel.org, Rob Herring <robh+dt@...nel.org>
Cc: Subbaraman Narayanamurthy <subbaram@...eaurora.org>,
David Collins <collinsd@...eaurora.org>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Stephen Boyd <sboyd@...nel.org>,
Anirudh Ghayal <aghayal@...eaurora.org>,
Kavya Nunna <knunna@...eaurora.org>
Subject: Re: [RESEND PATCH v6 3/3] extcon: qcom-spmi: Add support for VBUS
detection
Hi,
Please use get_maintainer.pl script when you send the patches.
I didn't receive the patches. I'll review.
Thanks,
Chanwoo Choi
On 21. 1. 26. 오전 9:38, Guru Das Srinagesh wrote:
> From: Anirudh Ghayal <aghayal@...eaurora.org>
>
> VBUS can be detected via a dedicated PMIC pin. Add support
> for reporting the VBUS status.
>
> Signed-off-by: Anirudh Ghayal <aghayal@...eaurora.org>
> Signed-off-by: Kavya Nunna <knunna@...eaurora.org>
> Signed-off-by: Guru Das Srinagesh <gurus@...eaurora.org>
> ---
> drivers/extcon/extcon-qcom-spmi-misc.c | 99 +++++++++++++++++++++++++++-------
> 1 file changed, 80 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/extcon/extcon-qcom-spmi-misc.c b/drivers/extcon/extcon-qcom-spmi-misc.c
> index 6b836ae..9e8ccfb 100644
> --- a/drivers/extcon/extcon-qcom-spmi-misc.c
> +++ b/drivers/extcon/extcon-qcom-spmi-misc.c
> @@ -1,7 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0-only
> /**
> * extcon-qcom-spmi-misc.c - Qualcomm USB extcon driver to support USB ID
> - * detection based on extcon-usb-gpio.c.
> + * and VBUS detection based on extcon-usb-gpio.c.
> *
> * Copyright (C) 2016 Linaro, Ltd.
> * Stephen Boyd <stephen.boyd@...aro.org>
> @@ -21,30 +21,56 @@
>
> struct qcom_usb_extcon_info {
> struct extcon_dev *edev;
> - int irq;
> + int id_irq;
> + int vbus_irq;
> struct delayed_work wq_detcable;
> unsigned long debounce_jiffies;
> };
>
> static const unsigned int qcom_usb_extcon_cable[] = {
> + EXTCON_USB,
> EXTCON_USB_HOST,
> EXTCON_NONE,
> };
>
> static void qcom_usb_extcon_detect_cable(struct work_struct *work)
> {
> - bool id;
> + bool state = false;
> int ret;
> + union extcon_property_value val;
> struct qcom_usb_extcon_info *info = container_of(to_delayed_work(work),
> struct qcom_usb_extcon_info,
> wq_detcable);
>
> - /* check ID and update cable state */
> - ret = irq_get_irqchip_state(info->irq, IRQCHIP_STATE_LINE_LEVEL, &id);
> - if (ret)
> - return;
> + if (info->id_irq > 0) {
> + /* check ID and update cable state */
> + ret = irq_get_irqchip_state(info->id_irq,
> + IRQCHIP_STATE_LINE_LEVEL, &state);
> + if (ret)
> + return;
> +
> + if (!state) {
> + val.intval = true;
> + extcon_set_property(info->edev, EXTCON_USB_HOST,
> + EXTCON_PROP_USB_SS, val);
> + }
> + extcon_set_state_sync(info->edev, EXTCON_USB_HOST, !state);
> + }
>
> - extcon_set_state_sync(info->edev, EXTCON_USB_HOST, !id);
> + if (info->vbus_irq > 0) {
> + /* check VBUS and update cable state */
> + ret = irq_get_irqchip_state(info->vbus_irq,
> + IRQCHIP_STATE_LINE_LEVEL, &state);
> + if (ret)
> + return;
> +
> + if (state) {
> + val.intval = true;
> + extcon_set_property(info->edev, EXTCON_USB,
> + EXTCON_PROP_USB_SS, val);
> + }
> + extcon_set_state_sync(info->edev, EXTCON_USB, state);
> + }
> }
>
> static irqreturn_t qcom_usb_irq_handler(int irq, void *dev_id)
> @@ -79,21 +105,48 @@ static int qcom_usb_extcon_probe(struct platform_device *pdev)
> return ret;
> }
>
> + ret = extcon_set_property_capability(info->edev,
> + EXTCON_USB, EXTCON_PROP_USB_SS);
> + ret |= extcon_set_property_capability(info->edev,
> + EXTCON_USB_HOST, EXTCON_PROP_USB_SS);
> + if (ret) {
> + dev_err(dev, "failed to register extcon props rc=%d\n",
> + ret);
> + return ret;
> + }
> +
> info->debounce_jiffies = msecs_to_jiffies(USB_ID_DEBOUNCE_MS);
> INIT_DELAYED_WORK(&info->wq_detcable, qcom_usb_extcon_detect_cable);
>
> - info->irq = platform_get_irq_byname(pdev, "usb_id");
> - if (info->irq < 0)
> - return info->irq;
> + info->id_irq = platform_get_irq_byname(pdev, "usb_id");
> + if (info->id_irq > 0) {
> + ret = devm_request_threaded_irq(dev, info->id_irq, NULL,
> + qcom_usb_irq_handler,
> + IRQF_TRIGGER_RISING |
> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> + pdev->name, info);
> + if (ret < 0) {
> + dev_err(dev, "failed to request handler for ID IRQ\n");
> + return ret;
> + }
> + }
>
> - ret = devm_request_threaded_irq(dev, info->irq, NULL,
> + info->vbus_irq = platform_get_irq_byname(pdev, "usb_vbus");
> + if (info->vbus_irq > 0) {
> + ret = devm_request_threaded_irq(dev, info->vbus_irq, NULL,
> qcom_usb_irq_handler,
> IRQF_TRIGGER_RISING |
> IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> pdev->name, info);
> - if (ret < 0) {
> - dev_err(dev, "failed to request handler for ID IRQ\n");
> - return ret;
> + if (ret < 0) {
> + dev_err(dev, "failed to request handler for VBUS IRQ\n");
> + return ret;
> + }
> + }
> +
> + if (info->id_irq < 0 && info->vbus_irq < 0) {
> + dev_err(dev, "ID and VBUS IRQ not found\n");
> + return -EINVAL;
> }
>
> platform_set_drvdata(pdev, info);
> @@ -120,8 +173,12 @@ static int qcom_usb_extcon_suspend(struct device *dev)
> struct qcom_usb_extcon_info *info = dev_get_drvdata(dev);
> int ret = 0;
>
> - if (device_may_wakeup(dev))
> - ret = enable_irq_wake(info->irq);
> + if (device_may_wakeup(dev)) {
> + if (info->id_irq > 0)
> + ret = enable_irq_wake(info->id_irq);
> + if (info->vbus_irq > 0)
> + ret = enable_irq_wake(info->vbus_irq);
> + }
>
> return ret;
> }
> @@ -131,8 +188,12 @@ static int qcom_usb_extcon_resume(struct device *dev)
> struct qcom_usb_extcon_info *info = dev_get_drvdata(dev);
> int ret = 0;
>
> - if (device_may_wakeup(dev))
> - ret = disable_irq_wake(info->irq);
> + if (device_may_wakeup(dev)) {
> + if (info->id_irq > 0)
> + ret = disable_irq_wake(info->id_irq);
> + if (info->vbus_irq > 0)
> + ret = disable_irq_wake(info->vbus_irq);
> + }
>
> return ret;
> }
>
Powered by blists - more mailing lists