[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210221174930.27324-9-nramas@linux.microsoft.com>
Date: Sun, 21 Feb 2021 09:49:25 -0800
From: Lakshmi Ramasubramanian <nramas@...ux.microsoft.com>
To: zohar@...ux.ibm.com, bauerman@...ux.ibm.com, robh@...nel.org,
takahiro.akashi@...aro.org, gregkh@...uxfoundation.org,
will@...nel.org, joe@...ches.com, catalin.marinas@....com,
mpe@...erman.id.au, sfr@...b.auug.org.au
Cc: james.morse@....com, sashal@...nel.org, benh@...nel.crashing.org,
paulus@...ba.org, frowand.list@...il.com,
vincenzo.frascino@....com, mark.rutland@....com,
dmitry.kasatkin@...il.com, jmorris@...ei.org, serge@...lyn.com,
pasha.tatashin@...een.com, allison@...utok.net,
masahiroy@...nel.org, mbrugger@...e.com, hsinyi@...omium.org,
tao.li@...o.com, christophe.leroy@....fr,
prsriva@...ux.microsoft.com, balajib@...ux.microsoft.com,
linux-integrity@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linuxppc-dev@...ts.ozlabs.org
Subject: [PATCH v19 08/13] powerpc: Move ima buffer fields to struct kimage
The fields ima_buffer_addr and ima_buffer_size in "struct kimage_arch"
for powerpc are used to carry forward the IMA measurement list across
kexec system call. These fields are not architecture specific, but are
currently limited to powerpc.
arch_ima_add_kexec_buffer() defined in "arch/powerpc/kexec/ima.c"
sets ima_buffer_addr and ima_buffer_size for the kexec system call.
This function does not have architecture specific code, but is
currently limited to powerpc.
Move ima_buffer_addr and ima_buffer_size to "struct kimage".
Set ima_buffer_addr and ima_buffer_size in ima_add_kexec_buffer()
in security/integrity/ima/ima_kexec.c.
Co-developed-by: Prakhar Srivastava <prsriva@...ux.microsoft.com>
Signed-off-by: Prakhar Srivastava <prsriva@...ux.microsoft.com>
Signed-off-by: Lakshmi Ramasubramanian <nramas@...ux.microsoft.com>
Suggested-by: Will Deacon <will@...nel.org>
Reviewed-by: Thiago Jung Bauermann <bauerman@...ux.ibm.com>
---
arch/powerpc/include/asm/ima.h | 3 ---
arch/powerpc/include/asm/kexec.h | 5 -----
arch/powerpc/kexec/ima.c | 29 ++++++-----------------------
include/linux/kexec.h | 3 +++
security/integrity/ima/ima_kexec.c | 8 ++------
5 files changed, 11 insertions(+), 37 deletions(-)
diff --git a/arch/powerpc/include/asm/ima.h b/arch/powerpc/include/asm/ima.h
index ead488cf3981..51f64fd06c19 100644
--- a/arch/powerpc/include/asm/ima.h
+++ b/arch/powerpc/include/asm/ima.h
@@ -14,9 +14,6 @@ static inline void remove_ima_buffer(void *fdt, int chosen_node) {}
#endif
#ifdef CONFIG_IMA_KEXEC
-int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr,
- size_t size);
-
int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node);
#else
static inline int setup_ima_buffer(const struct kimage *image, void *fdt,
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index c483c2cf284e..4d2c9b5087e1 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -108,11 +108,6 @@ struct kimage_arch {
unsigned long backup_start;
void *backup_buf;
void *fdt;
-
-#ifdef CONFIG_IMA_KEXEC
- phys_addr_t ima_buffer_addr;
- size_t ima_buffer_size;
-#endif
};
char *setup_kdump_cmdline(struct kimage *image, char *cmdline,
diff --git a/arch/powerpc/kexec/ima.c b/arch/powerpc/kexec/ima.c
index 720e50e490b6..ed38125e2f87 100644
--- a/arch/powerpc/kexec/ima.c
+++ b/arch/powerpc/kexec/ima.c
@@ -128,23 +128,6 @@ void remove_ima_buffer(void *fdt, int chosen_node)
}
#ifdef CONFIG_IMA_KEXEC
-/**
- * arch_ima_add_kexec_buffer - do arch-specific steps to add the IMA buffer
- *
- * Architectures should use this function to pass on the IMA buffer
- * information to the next kernel.
- *
- * Return: 0 on success, negative errno on error.
- */
-int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr,
- size_t size)
-{
- image->arch.ima_buffer_addr = load_addr;
- image->arch.ima_buffer_size = size;
-
- return 0;
-}
-
static int write_number(void *p, u64 value, int cells)
{
if (cells == 1) {
@@ -180,7 +163,7 @@ int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node)
u8 value[16];
remove_ima_buffer(fdt, chosen_node);
- if (!image->arch.ima_buffer_size)
+ if (!image->ima_buffer_size)
return 0;
ret = get_addr_size_cells(&addr_cells, &size_cells);
@@ -192,11 +175,11 @@ int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node)
if (entry_size > sizeof(value))
return -EINVAL;
- ret = write_number(value, image->arch.ima_buffer_addr, addr_cells);
+ ret = write_number(value, image->ima_buffer_addr, addr_cells);
if (ret)
return ret;
- ret = write_number(value + 4 * addr_cells, image->arch.ima_buffer_size,
+ ret = write_number(value + 4 * addr_cells, image->ima_buffer_size,
size_cells);
if (ret)
return ret;
@@ -206,13 +189,13 @@ int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node)
if (ret < 0)
return -EINVAL;
- ret = fdt_add_mem_rsv(fdt, image->arch.ima_buffer_addr,
- image->arch.ima_buffer_size);
+ ret = fdt_add_mem_rsv(fdt, image->ima_buffer_addr,
+ image->ima_buffer_size);
if (ret)
return -EINVAL;
pr_debug("IMA buffer at 0x%llx, size = 0x%zx\n",
- image->arch.ima_buffer_addr, image->arch.ima_buffer_size);
+ image->ima_buffer_addr, image->ima_buffer_size);
return 0;
}
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 0208fe8f8e42..c3e2a2af1aea 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -304,6 +304,9 @@ struct kimage {
#ifdef CONFIG_IMA_KEXEC
/* Virtual address of IMA measurement buffer for kexec syscall */
void *ima_buffer;
+
+ phys_addr_t ima_buffer_addr;
+ size_t ima_buffer_size;
#endif
/* Core ELF header buffer */
diff --git a/security/integrity/ima/ima_kexec.c b/security/integrity/ima/ima_kexec.c
index e29bea3dd4cc..8b1a3d50c49c 100644
--- a/security/integrity/ima/ima_kexec.c
+++ b/security/integrity/ima/ima_kexec.c
@@ -123,12 +123,8 @@ void ima_add_kexec_buffer(struct kimage *image)
return;
}
- ret = arch_ima_add_kexec_buffer(image, kbuf.mem, kexec_segment_size);
- if (ret) {
- pr_err("Error passing over kexec measurement buffer.\n");
- return;
- }
-
+ image->ima_buffer_addr = kbuf.mem;
+ image->ima_buffer_size = kexec_segment_size;
image->ima_buffer = kexec_buffer;
pr_debug("kexec measurement buffer for the loaded kernel at 0x%lx.\n",
--
2.30.0
Powered by blists - more mailing lists