| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <9b8f9394-3ab6-3a2f-32cf-4e60012be2d8@linaro.org>
Date: Sun, 21 Feb 2021 21:39:17 +0300
From: Andrey Konovalov <andrey.konovalov@...aro.org>
To: Robert Foss <robert.foss@...aro.org>, agross@...nel.org,
bjorn.andersson@...aro.org, todor.too@...il.com,
mchehab@...nel.org, robh+dt@...nel.org,
angelogioacchino.delregno@...ainline.org,
linux-arm-msm@...r.kernel.org, linux-media@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
AngeloGioacchino Del Regno <kholk11@...il.com>,
Sakari Ailus <sakari.ailus@....fi>,
Nicolas Boichat <drinkcat@...omium.org>
Cc: Rob Herring <robh@...nel.org>, Tomasz Figa <tfiga@...omium.org>,
Azam Sadiq Pasha Kapatrala Syed <akapatra@...cinc.com>,
Sarvesh Sridutt <Sarvesh.Sridutt@...rtwirelesscompute.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Jonathan Marek <jonathan@...ek.ca>
Subject: Re: [PATCH v5 20/22] arm64: dts: sdm845: Add CAMSS ISP node
Hi Robert,
Thank you for your patch!
Reviewed-by: Andrey Konovalov <andrey.konovalov@...aro.org>
Thanks,
Andrey
On 17.02.2021 14:21, Robert Foss wrote:
> Add the camss dt node for sdm845.
>
> Signed-off-by: Robert Foss <robert.foss@...aro.org>
> ---
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 135 +++++++++++++++++++++++++++
> 1 file changed, 135 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index bcf888381f14..4fe93c69908a 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -3911,6 +3911,141 @@ videocc: clock-controller@...0000 {
> #reset-cells = <1>;
> };
>
> + camss: camss@...000 {
> + compatible = "qcom,sdm845-camss";
> +
> + reg = <0 0xacb3000 0 0x1000>,
> + <0 0xacba000 0 0x1000>,
> + <0 0xacc8000 0 0x1000>,
> + <0 0xac65000 0 0x1000>,
> + <0 0xac66000 0 0x1000>,
> + <0 0xac67000 0 0x1000>,
> + <0 0xac68000 0 0x1000>,
> + <0 0xacaf000 0 0x4000>,
> + <0 0xacb6000 0 0x4000>,
> + <0 0xacc4000 0 0x4000>;
> + reg-names = "csid0",
> + "csid1",
> + "csid2",
> + "csiphy0",
> + "csiphy1",
> + "csiphy2",
> + "csiphy3",
> + "vfe0",
> + "vfe1",
> + "vfe_lite";
> +
> + interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "csid0",
> + "csid1",
> + "csid2",
> + "csiphy0",
> + "csiphy1",
> + "csiphy2",
> + "csiphy3",
> + "vfe0",
> + "vfe1",
> + "vfe_lite";
> +
> + power-domains = <&clock_camcc IFE_0_GDSC>,
> + <&clock_camcc IFE_1_GDSC>,
> + <&clock_camcc TITAN_TOP_GDSC>;
> +
> + clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
> + <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
> + <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>,
> + <&clock_camcc CAM_CC_IFE_0_CSID_CLK>,
> + <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>,
> + <&clock_camcc CAM_CC_IFE_1_CSID_CLK>,
> + <&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>,
> + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>,
> + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>,
> + <&clock_camcc CAM_CC_CSIPHY0_CLK>,
> + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>,
> + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>,
> + <&clock_camcc CAM_CC_CSIPHY1_CLK>,
> + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>,
> + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>,
> + <&clock_camcc CAM_CC_CSIPHY2_CLK>,
> + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>,
> + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>,
> + <&clock_camcc CAM_CC_CSIPHY3_CLK>,
> + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>,
> + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>,
> + <&gcc GCC_CAMERA_AHB_CLK>,
> + <&gcc GCC_CAMERA_AXI_CLK>,
> + <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
> + <&clock_camcc CAM_CC_SOC_AHB_CLK>,
> + <&clock_camcc CAM_CC_IFE_0_AXI_CLK>,
> + <&clock_camcc CAM_CC_IFE_0_CLK>,
> + <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
> + <&clock_camcc CAM_CC_IFE_0_CLK_SRC>,
> + <&clock_camcc CAM_CC_IFE_1_AXI_CLK>,
> + <&clock_camcc CAM_CC_IFE_1_CLK>,
> + <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
> + <&clock_camcc CAM_CC_IFE_1_CLK_SRC>,
> + <&clock_camcc CAM_CC_IFE_LITE_CLK>,
> + <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
> + <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>;
> + clock-names = "camnoc_axi",
> + "cpas_ahb",
> + "cphy_rx_src",
> + "csi0",
> + "csi0_src",
> + "csi1",
> + "csi1_src",
> + "csi2",
> + "csi2_src",
> + "csiphy0",
> + "csiphy0_timer",
> + "csiphy0_timer_src",
> + "csiphy1",
> + "csiphy1_timer",
> + "csiphy1_timer_src",
> + "csiphy2",
> + "csiphy2_timer",
> + "csiphy2_timer_src",
> + "csiphy3",
> + "csiphy3_timer",
> + "csiphy3_timer_src",
> + "gcc_camera_ahb",
> + "gcc_camera_axi",
> + "slow_ahb_src",
> + "soc_ahb",
> + "vfe0_axi",
> + "vfe0",
> + "vfe0_cphy_rx",
> + "vfe0_src",
> + "vfe1_axi",
> + "vfe1",
> + "vfe1_cphy_rx",
> + "vfe1_src",
> + "vfe_lite",
> + "vfe_lite_cphy_rx",
> + "vfe_lite_src";
> +
> + iommus = <&apps_smmu 0x0808 0x0>,
> + <&apps_smmu 0x0810 0x8>,
> + <&apps_smmu 0x0c08 0x0>,
> + <&apps_smmu 0x0c10 0x8>;
> +
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +
> cci: cci@...a000 {
> compatible = "qcom,sdm845-cci";
> #address-cells = <1>;
>
Powered by blists - more mailing lists