| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <3b8dd556-8c09-9686-dec6-9d523a9762a8@roeck-us.net>
Date: Mon, 22 Feb 2021 07:46:14 -0800
From: Guenter Roeck <linux@...ck-us.net>
To: Romain Perier <romain.perier@...il.com>,
Kees Cook <keescook@...omium.org>,
kernel-hardening@...ts.openwall.com
Cc: linux-hwmon@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 11/20] hwmon: Manual replacement of the deprecated
strlcpy() with return values
On 2/22/21 7:12 AM, Romain Perier wrote:
> The strlcpy() reads the entire source buffer first, it is dangerous if
> the source buffer lenght is unbounded or possibility non NULL-terminated.
length
> It can lead to linear read overflows, crashes, etc...
>
Not here. This description is misleading.
> As recommended in the deprecated interfaces [1], it should be replaced
> by strscpy.
>
> This commit replaces all calls to strlcpy that handle the return values
> by the corresponding strscpy calls with new handling of the return
> values (as it is quite different between the two functions).
>
> [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
>
> Signed-off-by: Romain Perier <romain.perier@...il.com>
This patch just adds pain to injury, as the source 'buffers' are all fixed
strings and their length will never exceed the maximum buffer length.
I really don't see the point of using strscpy() in this situation.
> ---
> drivers/hwmon/pmbus/max20730.c | 66 +++++++++++++++++++++--------------------
This patch only modifies a single driver and should be tagged as such.
> 1 file changed, 35 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/hwmon/pmbus/max20730.c b/drivers/hwmon/pmbus/max20730.c
> index 9dd3dd79bc18..a384b57b7327 100644
> --- a/drivers/hwmon/pmbus/max20730.c
> +++ b/drivers/hwmon/pmbus/max20730.c
> @@ -107,7 +107,8 @@ struct max20730_debugfs_data {
> static ssize_t max20730_debugfs_read(struct file *file, char __user *buf,
> size_t count, loff_t *ppos)
> {
> - int ret, len;
> + int ret;
> + ssize_t len;
> int *idxp = file->private_data;
> int idx = *idxp;
> struct max20730_debugfs_data *psu = to_psu(idxp, idx);
> @@ -148,13 +149,13 @@ static ssize_t max20730_debugfs_read(struct file *file, char __user *buf,
> >> MAX20730_MFR_DEVSET1_TSTAT_BIT_POS;
>
> if (val == 0)
> - len = strlcpy(tbuf, "2000\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "2000\n", DEBUG_FS_DATA_MAX);
> else if (val == 1)
> - len = strlcpy(tbuf, "125\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "125\n", DEBUG_FS_DATA_MAX);
> else if (val == 2)
> - len = strlcpy(tbuf, "62.5\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "62.5\n", DEBUG_FS_DATA_MAX);
> else
> - len = strlcpy(tbuf, "32\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "32\n", DEBUG_FS_DATA_MAX);
> break;
> case MAX20730_DEBUGFS_INTERNAL_GAIN:
> val = (data->mfr_devset1 & MAX20730_MFR_DEVSET1_RGAIN_MASK)
> @@ -163,35 +164,35 @@ static ssize_t max20730_debugfs_read(struct file *file, char __user *buf,
> if (data->id == max20734) {
> /* AN6209 */
> if (val == 0)
> - len = strlcpy(tbuf, "0.8\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "0.8\n", DEBUG_FS_DATA_MAX);
> else if (val == 1)
> - len = strlcpy(tbuf, "3.2\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "3.2\n", DEBUG_FS_DATA_MAX);
> else if (val == 2)
> - len = strlcpy(tbuf, "1.6\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "1.6\n", DEBUG_FS_DATA_MAX);
> else
> - len = strlcpy(tbuf, "6.4\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "6.4\n", DEBUG_FS_DATA_MAX);
> } else if (data->id == max20730 || data->id == max20710) {
> /* AN6042 or AN6140 */
> if (val == 0)
> - len = strlcpy(tbuf, "0.9\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "0.9\n", DEBUG_FS_DATA_MAX);
> else if (val == 1)
> - len = strlcpy(tbuf, "3.6\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "3.6\n", DEBUG_FS_DATA_MAX);
> else if (val == 2)
> - len = strlcpy(tbuf, "1.8\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "1.8\n", DEBUG_FS_DATA_MAX);
> else
> - len = strlcpy(tbuf, "7.2\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "7.2\n", DEBUG_FS_DATA_MAX);
> } else if (data->id == max20743) {
> /* AN6042 */
> if (val == 0)
> - len = strlcpy(tbuf, "0.45\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "0.45\n", DEBUG_FS_DATA_MAX);
> else if (val == 1)
> - len = strlcpy(tbuf, "1.8\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "1.8\n", DEBUG_FS_DATA_MAX);
> else if (val == 2)
> - len = strlcpy(tbuf, "0.9\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "0.9\n", DEBUG_FS_DATA_MAX);
> else
> - len = strlcpy(tbuf, "3.6\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "3.6\n", DEBUG_FS_DATA_MAX);
> } else {
> - len = strlcpy(tbuf, "Not supported\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "Not supported\n", DEBUG_FS_DATA_MAX);
> }
> break;
> case MAX20730_DEBUGFS_BOOT_VOLTAGE:
> @@ -199,26 +200,26 @@ static ssize_t max20730_debugfs_read(struct file *file, char __user *buf,
> >> MAX20730_MFR_DEVSET1_VBOOT_BIT_POS;
>
> if (val == 0)
> - len = strlcpy(tbuf, "0.6484\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "0.6484\n", DEBUG_FS_DATA_MAX);
> else if (val == 1)
> - len = strlcpy(tbuf, "0.8984\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "0.8984\n", DEBUG_FS_DATA_MAX);
> else if (val == 2)
> - len = strlcpy(tbuf, "1.0\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "1.0\n", DEBUG_FS_DATA_MAX);
> else
> - len = strlcpy(tbuf, "Invalid\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "Invalid\n", DEBUG_FS_DATA_MAX);
> break;
> case MAX20730_DEBUGFS_OUT_V_RAMP_RATE:
> val = (data->mfr_devset2 & MAX20730_MFR_DEVSET2_VRATE)
> >> MAX20730_MFR_DEVSET2_VRATE_BIT_POS;
>
> if (val == 0)
> - len = strlcpy(tbuf, "4\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "4\n", DEBUG_FS_DATA_MAX);
> else if (val == 1)
> - len = strlcpy(tbuf, "2\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "2\n", DEBUG_FS_DATA_MAX);
> else if (val == 2)
> - len = strlcpy(tbuf, "1\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "1\n", DEBUG_FS_DATA_MAX);
> else
> - len = strlcpy(tbuf, "Invalid\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "Invalid\n", DEBUG_FS_DATA_MAX);
> break;
> case MAX20730_DEBUGFS_OC_PROTECT_MODE:
> ret = (data->mfr_devset2 & MAX20730_MFR_DEVSET2_OCPM_MASK)
> @@ -230,13 +231,13 @@ static ssize_t max20730_debugfs_read(struct file *file, char __user *buf,
> >> MAX20730_MFR_DEVSET2_SS_BIT_POS;
>
> if (val == 0)
> - len = strlcpy(tbuf, "0.75\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "0.75\n", DEBUG_FS_DATA_MAX);
> else if (val == 1)
> - len = strlcpy(tbuf, "1.5\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "1.5\n", DEBUG_FS_DATA_MAX);
> else if (val == 2)
> - len = strlcpy(tbuf, "3\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "3\n", DEBUG_FS_DATA_MAX);
> else
> - len = strlcpy(tbuf, "6\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "6\n", DEBUG_FS_DATA_MAX);
> break;
> case MAX20730_DEBUGFS_IMAX:
> ret = (data->mfr_devset2 & MAX20730_MFR_DEVSET2_IMAX_MASK)
> @@ -287,9 +288,12 @@ static ssize_t max20730_debugfs_read(struct file *file, char __user *buf,
> "%d.%d\n", ret / 10000, ret % 10000);
> break;
> default:
> - len = strlcpy(tbuf, "Invalid\n", DEBUG_FS_DATA_MAX);
> + len = strscpy(tbuf, "Invalid\n", DEBUG_FS_DATA_MAX);
> }
>
> + if (len == -E2BIG)
> + return -E2BIG;
> +
> return simple_read_from_buffer(buf, count, ppos, tbuf, len);
> }
>
>
Powered by blists - more mailing lists