| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <fad75c44-9259-a1da-bdc4-518b93111a65@xilinx.com>
Date: Mon, 22 Feb 2021 22:05:29 -0800
From: Lizhi Hou <lizhi.hou@...inx.com>
To: Tom Rix <trix@...hat.com>, Lizhi Hou <lizhi.hou@...inx.com>,
<linux-kernel@...r.kernel.org>
CC: <linux-fpga@...r.kernel.org>, <maxz@...inx.com>,
<sonal.santan@...inx.com>, <michal.simek@...inx.com>,
<stefanos@...inx.com>, <devicetree@...r.kernel.org>,
<mdf@...nel.org>, <robh@...nel.org>, Max Zhen <max.zhen@...inx.com>
Subject: Re: [PATCH V3 XRT Alveo 02/18] fpga: xrt: driver metadata helper
functions
Hi Tom,
On 02/20/2021 09:07 AM, Tom Rix wrote:
> On 2/17/21 10:40 PM, Lizhi Hou wrote:
>> XRT drivers use device tree as metadata format to discover HW subsystems
>> behind PCIe BAR. Thus libfdt functions are called for driver to parse
> for the driver to parse the
will fix.
>> device tree blob.
>>
>> Signed-off-by: Sonal Santan <sonal.santan@...inx.com>
>> Signed-off-by: Max Zhen <max.zhen@...inx.com>
>> Signed-off-by: Lizhi Hou <lizhih@...inx.com>
>> ---
>> drivers/fpga/xrt/include/metadata.h | 229 ++++++++++++
>> drivers/fpga/xrt/metadata/metadata.c | 524 +++++++++++++++++++++++++++
>> 2 files changed, 753 insertions(+)
>> create mode 100644 drivers/fpga/xrt/include/metadata.h
>> create mode 100644 drivers/fpga/xrt/metadata/metadata.c
>>
>> diff --git a/drivers/fpga/xrt/include/metadata.h b/drivers/fpga/xrt/include/metadata.h
>> new file mode 100644
>> index 000000000000..b929bc469b73
>> --- /dev/null
>> +++ b/drivers/fpga/xrt/include/metadata.h
>> @@ -0,0 +1,229 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Header file for Xilinx Runtime (XRT) driver
>> + *
>> + * Copyright (C) 2020-2021 Xilinx, Inc.
>> + *
>> + * Authors:
>> + * Lizhi Hou <Lizhi.Hou@...inx.com>
>> + */
>> +
>> +#ifndef _XRT_METADATA_H
>> +#define _XRT_METADATA_H
>> +
>> +#include <linux/device.h>
>> +#include <linux/vmalloc.h>
>> +#include <linux/uuid.h>
>> +
>> +#define XRT_MD_INVALID_LENGTH (~0UL)
>> +
> These #defines could be in alphabetical order
>
> Some #define with embedded acronyms could be expanded
>
> ex/ XRT_MD_NODE_CMC_REG , what is CMC ?
Will reorder. Expanding might make macro name too long. I will add
comment as below:
/*
* IP nodes
* AF: AXI Firewall
* CMC: Card Management Controller
* ERT: Embedded Runtime
* PLP: Provider Reconfigurable Partition
* ULP: User Reconfigurable Partition
*/
>
>> +#define XRT_MD_PROP_COMPATIBLE "compatible"
>> +#define XRT_MD_PROP_PF_NUM "pcie_physical_function"
>> +#define XRT_MD_PROP_BAR_IDX "pcie_bar_mapping"
>> +#define XRT_MD_PROP_IO_OFFSET "reg"
>> +#define XRT_MD_PROP_INTERRUPTS "interrupts"
>> +#define XRT_MD_PROP_INTERFACE_UUID "interface_uuid"
>> +#define XRT_MD_PROP_LOGIC_UUID "logic_uuid"
>> +#define XRT_MD_PROP_VERSION_MAJOR "firmware_version_major"
>> +
>> +#define XRT_MD_PROP_HWICAP "axi_hwicap"
>> +#define XRT_MD_PROP_PDI_CONFIG "pdi_config_mem"
>> +
>> +#define XRT_MD_NODE_ENDPOINTS "addressable_endpoints"
>> +#define XRT_MD_INTERFACES_PATH "/interfaces"
>> +
>> +#define XRT_MD_NODE_FIRMWARE "firmware"
>> +#define XRT_MD_NODE_INTERFACES "interfaces"
>> +#define XRT_MD_NODE_PARTITION_INFO "partition_info"
>> +
>> +#define XRT_MD_NODE_FLASH "ep_card_flash_program_00"
>> +#define XRT_MD_NODE_XVC_PUB "ep_debug_bscan_user_00"
>> +#define XRT_MD_NODE_XVC_PRI "ep_debug_bscan_mgmt_00"
>> +#define XRT_MD_NODE_SYSMON "ep_cmp_sysmon_00"
>> +#define XRT_MD_NODE_AF_BLP_CTRL_MGMT "ep_firewall_blp_ctrl_mgmt_00"
>> +#define XRT_MD_NODE_AF_BLP_CTRL_USER "ep_firewall_blp_ctrl_user_00"
>> +#define XRT_MD_NODE_AF_CTRL_MGMT "ep_firewall_ctrl_mgmt_00"
>> +#define XRT_MD_NODE_AF_CTRL_USER "ep_firewall_ctrl_user_00"
>> +#define XRT_MD_NODE_AF_CTRL_DEBUG "ep_firewall_ctrl_debug_00"
>> +#define XRT_MD_NODE_AF_DATA_H2C "ep_firewall_data_h2c_00"
>> +#define XRT_MD_NODE_AF_DATA_C2H "ep_firewall_data_c2h_00"
>> +#define XRT_MD_NODE_AF_DATA_P2P "ep_firewall_data_p2p_00"
>> +#define XRT_MD_NODE_AF_DATA_M2M "ep_firewall_data_m2m_00"
>> +#define XRT_MD_NODE_CMC_REG "ep_cmc_regmap_00"
>> +#define XRT_MD_NODE_CMC_RESET "ep_cmc_reset_00"
>> +#define XRT_MD_NODE_CMC_MUTEX "ep_cmc_mutex_00"
>> +#define XRT_MD_NODE_CMC_FW_MEM "ep_cmc_firmware_mem_00"
>> +#define XRT_MD_NODE_ERT_FW_MEM "ep_ert_firmware_mem_00"
>> +#define XRT_MD_NODE_ERT_CQ_MGMT "ep_ert_command_queue_mgmt_00"
>> +#define XRT_MD_NODE_ERT_CQ_USER "ep_ert_command_queue_user_00"
>> +#define XRT_MD_NODE_MAILBOX_MGMT "ep_mailbox_mgmt_00"
>> +#define XRT_MD_NODE_MAILBOX_USER "ep_mailbox_user_00"
>> +#define XRT_MD_NODE_GATE_PLP "ep_pr_isolate_plp_00"
>> +#define XRT_MD_NODE_GATE_ULP "ep_pr_isolate_ulp_00"
>> +#define XRT_MD_NODE_PCIE_MON "ep_pcie_link_mon_00"
>> +#define XRT_MD_NODE_DDR_CALIB "ep_ddr_mem_calib_00"
>> +#define XRT_MD_NODE_CLK_KERNEL1 "ep_aclk_kernel_00"
>> +#define XRT_MD_NODE_CLK_KERNEL2 "ep_aclk_kernel_01"
>> +#define XRT_MD_NODE_CLK_KERNEL3 "ep_aclk_hbm_00"
>> +#define XRT_MD_NODE_KDMA_CTRL "ep_kdma_ctrl_00"
>> +#define XRT_MD_NODE_FPGA_CONFIG "ep_fpga_configuration_00"
>> +#define XRT_MD_NODE_ERT_SCHED "ep_ert_sched_00"
>> +#define XRT_MD_NODE_XDMA "ep_xdma_00"
>> +#define XRT_MD_NODE_MSIX "ep_msix_00"
>> +#define XRT_MD_NODE_QDMA "ep_qdma_00"
>> +#define XRT_MD_XRT_MD_NODE_QDMA4 "ep_qdma4_00"
>> +#define XRT_MD_NODE_STM "ep_stream_traffic_manager_00"
>> +#define XRT_MD_NODE_STM4 "ep_stream_traffic_manager4_00"
>> +#define XRT_MD_NODE_CLK_SHUTDOWN "ep_aclk_shutdown_00"
>> +#define XRT_MD_NODE_ERT_BASE "ep_ert_base_address_00"
>> +#define XRT_MD_NODE_ERT_RESET "ep_ert_reset_00"
>> +#define XRT_MD_NODE_CLKFREQ_K1 "ep_freq_cnt_aclk_kernel_00"
>> +#define XRT_MD_NODE_CLKFREQ_K2 "ep_freq_cnt_aclk_kernel_01"
>> +#define XRT_MD_NODE_CLKFREQ_HBM "ep_freq_cnt_aclk_hbm_00"
>> +#define XRT_MD_NODE_GAPPING "ep_gapping_demand_00"
>> +#define XRT_MD_NODE_UCS_CONTROL_STATUS "ep_ucs_control_status_00"
>> +#define XRT_MD_NODE_P2P "ep_p2p_00"
>> +#define XRT_MD_NODE_REMAP_P2P "ep_remap_p2p_00"
>> +#define XRT_MD_NODE_DDR4_RESET_GATE "ep_ddr_mem_srsr_gate_00"
>> +#define XRT_MD_NODE_ADDR_TRANSLATOR "ep_remap_data_c2h_00"
>> +#define XRT_MD_NODE_MAILBOX_XRT "ep_mailbox_user_to_ert_00"
>> +#define XRT_MD_NODE_PMC_INTR "ep_pmc_intr_00"
>> +#define XRT_MD_NODE_PMC_MUX "ep_pmc_mux_00"
>> +
>> +/* driver defined endpoints */
>> +#define XRT_MD_NODE_VSEC "drv_ep_vsec_00"
>> +#define XRT_MD_NODE_VSEC_GOLDEN "drv_ep_vsec_golden_00"
>> +#define XRT_MD_NODE_BLP_ROM "drv_ep_blp_rom_00"
>> +#define XRT_MD_NODE_MAILBOX_VSEC "ep_mailbox_vsec_00"
>> +#define XRT_MD_NODE_PLAT_INFO "drv_ep_platform_info_mgmt_00"
>> +#define XRT_MD_NODE_TEST "drv_ep_test_00"
>> +#define XRT_MD_NODE_MGMT_MAIN "drv_ep_mgmt_main_00"
>> +#define XRT_MD_NODE_FLASH_VSEC "drv_ep_card_flash_program_00"
>> +#define XRT_MD_NODE_GOLDEN_VER "drv_ep_golden_ver_00"
>> +#define XRT_MD_XRT_MD_NODE_PARTITION_INFO_BLP "partition_info_0"
>> +#define XRT_MD_XRT_MD_NODE_PARTITION_INFO_PLP "partition_info_1"
>> +
>> +#define XRT_MD_NODE_DDR_SRSR "drv_ep_ddr_srsr"
>> +#define XRT_MD_REGMAP_DDR_SRSR "drv_ddr_srsr"
>> +
>> +#define XRT_MD_PROP_OFFSET "drv_offset"
>> +#define XRT_MD_PROP_CLK_FREQ "drv_clock_frequency"
>> +#define XRT_MD_PROP_CLK_CNT "drv_clock_frequency_counter"
>> +#define XRT_MD_PROP_VBNV "vbnv"
>> +#define XRT_MD_PROP_VROM "vrom"
>> +#define XRT_MD_PROP_PARTITION_LEVEL "partition_level"
>> +
>> +struct xrt_md_endpoint {
>> + const char *ep_name;
>> + u32 bar;
>> + long bar_off;
>> + ulong size;
>> + char *regmap;
>> + char *regmap_ver;
>> +};
> could the existing 'struct regmap' be used here ?
This structure is just a direct translation of firmware node. It is
simple description of hardware endpoint.
>> +
>> +/* Note: res_id is defined by leaf driver and must start with 0. */
>> +struct xrt_iores_map {
>> + char *res_name;
>> + int res_id;
>> +};
>> +
>> +static inline int xrt_md_res_name2id(const struct xrt_iores_map *res_map,
>> + int entry_num, const char *res_name)
>> +{
>> + int i;
>> +
>> + for (i = 0; i < entry_num; i++) {
>> + if (!strcmp(res_name, res_map->res_name))
> Use the 'n' variant strncmp for better safety.
>
> Fix generally.
Will replace all strcmp()
>
>> + return res_map->res_id;
>> + res_map++;
>> + }
>> + return -1;
>> +}
>> +
>> +static inline const char *
>> +xrt_md_res_id2name(const struct xrt_iores_map *res_map, int entry_num, int id)
>> +{
>> + int i;
>> +
>> + for (i = 0; i < entry_num; i++) {
>> + if (res_map->res_id == id)
>> + return res_map->res_name;
>> + res_map++;
>> + }
>> + return NULL;
>> +}
>> +
>> +unsigned long xrt_md_size(struct device *dev, const char *blob);
>> +int xrt_md_create(struct device *dev, char **blob);
>> +int xrt_md_add_endpoint(struct device *dev, char *blob,
>> + struct xrt_md_endpoint *ep);
>> +int xrt_md_del_endpoint(struct device *dev, char *blob, const char *ep_name,
>> + char *regmap_name);
>> +int xrt_md_get_prop(struct device *dev, const char *blob, const char *ep_name,
>> + const char *regmap_name, const char *prop,
>> + const void **val, int *size);
>> +int xrt_md_set_prop(struct device *dev, char *blob, const char *ep_name,
>> + const char *regmap_name, const char *prop,
>> + const void *val, int size);
>> +int xrt_md_copy_endpoint(struct device *dev, char *blob, const char *src_blob,
>> + const char *ep_name, const char *regmap_name,
>> + const char *new_ep_name);
>> +int xrt_md_get_next_endpoint(struct device *dev, const char *blob,
>> + const char *ep_name, const char *regmap_name,
>> + char **next_ep, char **next_regmap);
>> +int xrt_md_get_compatible_endpoint(struct device *dev, const char *blob,
>> + const char *regmap_name, const char **ep_name);
>> +int xrt_md_find_endpoint(struct device *dev, const char *blob,
>> + const char *ep_name, const char *regmap_name,
>> + const char **epname);
>> +void xrt_md_pack(struct device *dev, char *blob);
>> +char *xrt_md_dup(struct device *dev, const char *blob);
>> +int xrt_md_get_intf_uuids(struct device *dev, const char *blob,
>> + u32 *num_uuids, uuid_t *intf_uuids);
>> +static inline int xrt_md_copy_all_endpoints(struct device *dev, char *blob, const char *src_blob)
>> +{
>> + return xrt_md_copy_endpoint(dev, blob, src_blob, XRT_MD_NODE_ENDPOINTS,
>> + NULL, NULL);
> A wrapping a single call seems like an unnecessary abstraction layer.
>
> can this be reduced/removed ?
Will remove.
>
>> +}
>> +
>> +/*
>> + * Firmware provides 128 bit hash string as unque id of partition/interface.
> The firmware provides a 128 bit hash string as a unique id to the partition/interface.
>
> Existing hw does not yet use the cononical form, so it is necessary to use a translation function.
Will fix
>
>> + * This string will be canonical textual representation in the future.
>> + * Before that, introducing these two functions below to translate
>> + * hash string to uuid_t for released hardware.
> Is there an existing version string the new hw will use to check which way to go ?
We do not have the new hw yet.
>> + */
>> +static inline void xrt_md_trans_uuid2str(const uuid_t *uuid, char *uuidstr)
>> +{
>> + int i, p;
>> + u8 *u = (u8 *)uuid;
>> +
>> + for (p = 0, i = sizeof(uuid_t) - 1; i >= 0; p++, i--)
> This loop needs to be improved.
>
> Consider if sizeof(uuid_t) changed, accessing u[] would overflow.
Will fix all the issues of uuid2str()/str2uuid() you pointed out. The
rough idea is to use export_uuid() and import_uuid().
>
>> + (void)snprintf(&uuidstr[p * 2], 3, "%02x", u[i]);
> (void) cast isn't needed.
>> +}
>> +
>> +static inline int xrt_md_trans_str2uuid(struct device *dev, const char *uuidstr, uuid_t *p_uuid)
>> +{
>> + char *p;
>> + const char *str;
>> + char tmp[3] = { 0 };
>> + int i, ret;
>> +
>> + memset(p_uuid, 0, sizeof(*p_uuid));
>> + p = (char *)p_uuid;
> access with p_uuid->b[] would remove use of 'p'
>> + str = uuidstr + strlen(uuidstr) - 2;
>> +
>> + for (i = 0; i < sizeof(*p_uuid) && str >= uuidstr; i++) {
> is not filling p_uuid completely really ok ?
>> + tmp[0] = *str;
>> + tmp[1] = *(str + 1);
>> + ret = kstrtou8(tmp, 16, p);
>> + if (ret)
>> + return -EINVAL;
>> + p++;
>> + str -= 2;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +#endif
>> diff --git a/drivers/fpga/xrt/metadata/metadata.c b/drivers/fpga/xrt/metadata/metadata.c
>> new file mode 100644
>> index 000000000000..5d106396f438
>> --- /dev/null
>> +++ b/drivers/fpga/xrt/metadata/metadata.c
>> @@ -0,0 +1,524 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Xilinx Alveo FPGA Metadata parse APIs
>> + *
>> + * Copyright (C) 2020-2021 Xilinx, Inc.
>> + *
>> + * Authors:
>> + * Lizhi Hou <Lizhi.Hou@...inx.com>
>> + */
>> +
>> +#include <linux/libfdt_env.h>
>> +#include "libfdt.h"
>> +#include "metadata.h"
>> +
>> +#define MAX_BLOB_SIZE (4096 * 25)
>> +
>> +static int xrt_md_setprop(struct device *dev, char *blob, int offset,
>> + const char *prop, const void *val, int size);
>> +static int xrt_md_overlay(struct device *dev, char *blob, int target,
>> + const char *overlay_blob, int overlay_offset);
>> +static int xrt_md_get_endpoint(struct device *dev, const char *blob,
>> + const char *ep_name, const char *regmap_name,
>> + int *ep_offset);
> consider reordering functions so these fwd decl's are not needed
Will remove decl's.
>> +
>> +unsigned long xrt_md_size(struct device *dev, const char *blob)
>> +{
>> + unsigned long len = (long)fdt_totalsize(blob);
>> +
>> + len = (len > MAX_BLOB_SIZE) ? XRT_MD_INVALID_LENGTH : len;
>> + return len;
>> +}
>> +EXPORT_SYMBOL_GPL(xrt_md_size);
>> +
>> +int xrt_md_create(struct device *dev, char **blob)
>> +{
>> + int ret = 0;
>> +
>> + WARN_ON(!blob);
>> +
>> + *blob = vmalloc(MAX_BLOB_SIZE);
> why vmalloc instead of vzalloc ?
Will use vzalloc.
>> + if (!*blob)
>> + return -ENOMEM;
>> +
>> + ret = fdt_create_empty_tree(*blob, MAX_BLOB_SIZE);
>> + if (ret) {
>> + dev_err(dev, "format blob failed, ret = %d", ret);
>> + goto failed;
>> + }
>> +
>> + ret = fdt_next_node(*blob, -1, NULL);
> A variable called 'offset' would make more sense here because it is used later in fdt_add_subnode as the parentoffset parameter.
the following fdt_add_subnode should use 0 as the parentoffset
parameter. So I will keep 'ret' here.
>
>> + if (ret < 0) {
>> + dev_err(dev, "No Node, ret = %d", ret);
>> + goto failed;
>> + }
>> +
>> + ret = fdt_add_subnode(*blob, ret, XRT_MD_NODE_ENDPOINTS);
> why isn't the parentoffset '0' ?
Yes, 0 should be used as parentoffset.
>
>
>> + if (ret < 0) {
>> + dev_err(dev, "add node failed, ret = %d", ret);
>> + goto failed;
>> + }
>> +
>> + return 0;
>> +
>> +failed:
>> + vfree(*blob);
>> + *blob = NULL;
>> +
>> + return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(xrt_md_create);
>> +
>> +static int xrt_md_add_node(struct device *dev, char *blob, int parent_offset,
>> + const char *ep_name)
>> +{
>> + int ret;
>> +
>> + ret = fdt_add_subnode(blob, parent_offset, ep_name);
>> + if (ret < 0 && ret != -FDT_ERR_EXISTS)
>> + dev_err(dev, "failed to add node %s. %d", ep_name, ret);
>> +
>> + return ret;
>> +}
>> +
>> +int xrt_md_del_endpoint(struct device *dev, char *blob, const char *ep_name,
>> + char *regmap_name)
>> +{
>> + int ret;
>> + int ep_offset;
>> +
>> + ret = xrt_md_get_endpoint(dev, blob, ep_name, regmap_name, &ep_offset);
>> + if (ret) {
>> + dev_err(dev, "can not find ep %s", ep_name);
>> + return -EINVAL;
>> + }
>> +
>> + ret = fdt_del_node(blob, ep_offset);
>> + if (ret)
>> + dev_err(dev, "delete node %s failed, ret %d", ep_name, ret);
>> +
>> + return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(xrt_md_del_endpoint);
>> +
>> +static int __xrt_md_add_endpoint(struct device *dev, char *blob,
>> + struct xrt_md_endpoint *ep, int *offset, bool root)
>> +{
>> + int ret = 0;
>> + int ep_offset = 0;
>> + u32 val, count = 0;
>> + u64 io_range[2];
>> + char comp[128];
>> +
>> + if (!ep->ep_name) {
>> + dev_err(dev, "empty name");
>> + return -EINVAL;
>> + }
>> +
>> + if (!root) {
>> + ret = xrt_md_get_endpoint(dev, blob, XRT_MD_NODE_ENDPOINTS, NULL,
>> + &ep_offset);
>> + if (ret) {
>> + dev_err(dev, "invalid blob, ret = %d", ret);
>> + return -EINVAL;
>> + }
>> + }
>> +
>> + ep_offset = xrt_md_add_node(dev, blob, ep_offset, ep->ep_name);
>> + if (ep_offset < 0) {
>> + dev_err(dev, "add endpoint failed, ret = %d", ret);
>> + return -EINVAL;
>> + }
>> + if (offset)
>> + *offset = ep_offset;
>> +
>> + if (ep->size != 0) {
>> + val = cpu_to_be32(ep->bar);
>> + ret = xrt_md_setprop(dev, blob, ep_offset, XRT_MD_PROP_BAR_IDX,
>> + &val, sizeof(u32));
>> + if (ret) {
>> + dev_err(dev, "set %s failed, ret %d",
>> + XRT_MD_PROP_BAR_IDX, ret);
>> + goto failed;
>> + }
>> + io_range[0] = cpu_to_be64((u64)ep->bar_off);
>> + io_range[1] = cpu_to_be64((u64)ep->size);
> is there a type mismatch between bar (u32) and size (u64) ?
Do you mean ep->bar? 'ep->bar' is bar index. So it does not have type
mismatch issue.
>> + ret = xrt_md_setprop(dev, blob, ep_offset, XRT_MD_PROP_IO_OFFSET,
>> + io_range, sizeof(io_range));
>> + if (ret) {
>> + dev_err(dev, "set %s failed, ret %d",
>> + XRT_MD_PROP_IO_OFFSET, ret);
>> + goto failed;
>> + }
>> + }
>> +
>> + if (ep->regmap) {
>> + if (ep->regmap_ver) {
>> + count = snprintf(comp, sizeof(comp),
>> + "%s-%s", ep->regmap, ep->regmap_ver);
>> + count++;
>> + }
>> +
>> + count += snprintf(comp + count, sizeof(comp) - count,
>> + "%s", ep->regmap);
>> + count++;
> unlikely, but overflow is not checked.
Will add overflow check.
>
> are multiple null's in this string ok ?
yes.
>
>> +
>> + ret = xrt_md_setprop(dev, blob, ep_offset, XRT_MD_PROP_COMPATIBLE,
>> + comp, count);
>> + if (ret) {
>> + dev_err(dev, "set %s failed, ret %d",
>> + XRT_MD_PROP_COMPATIBLE, ret);
>> + goto failed;
>> + }
>> + }
>> +
>> +failed:
>> + if (ret)
>> + xrt_md_del_endpoint(dev, blob, ep->ep_name, NULL);
>> +
>> + return ret;
>> +}
>> +
>> +int xrt_md_add_endpoint(struct device *dev, char *blob,
>> + struct xrt_md_endpoint *ep)
>> +{
>> + return __xrt_md_add_endpoint(dev, blob, ep, NULL, false);
> ok, user doesn't add root's endpoint.
>
> could an assert be added ?
The word 'root' is misleading here. Will change this argument to 'char
*parent'
>
>> +}
>> +EXPORT_SYMBOL_GPL(xrt_md_add_endpoint);
>> +
>> +static int xrt_md_get_endpoint(struct device *dev, const char *blob,
>> + const char *ep_name, const char *regmap_name,
>> + int *ep_offset)
>> +{
>> + int offset;
>> + const char *name;
>> +
>> + for (offset = fdt_next_node(blob, -1, NULL);
>> + offset >= 0;
>> + offset = fdt_next_node(blob, offset, NULL)) {
>> + name = fdt_get_name(blob, offset, NULL);
>> + if (!name || strncmp(name, ep_name, strlen(ep_name) + 1))
> strlen() + 1 ?
This is to make sure "12345" and "123" are different.
>> + continue;
>> + if (!regmap_name ||
>> + !fdt_node_check_compatible(blob, offset, regmap_name))
>> + break;
>> + }
>> + if (offset < 0)
>> + return -ENODEV;
>> +
>> + *ep_offset = offset;
>> +
>> + return 0;
>> +}
>> +
>> +int xrt_md_find_endpoint(struct device *dev, const char *blob,
>> + const char *ep_name, const char *regmap_name,
>> + const char **epname)
>> +{
>> + int offset;
>> + int ret;
>> +
>> + ret = xrt_md_get_endpoint(dev, blob, ep_name, regmap_name,
>> + &offset);
>> + if (!ret && epname && offset >= 0)
> The offset >= 0 check isn't needed, !ret is enough
Will fix.
>> + *epname = fdt_get_name(blob, offset, NULL);
>> +
>> + return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(xrt_md_find_endpoint);
>> +
>> +int xrt_md_get_prop(struct device *dev, const char *blob, const char *ep_name,
>> + const char *regmap_name, const char *prop,
>> + const void **val, int *size)
>> +{
>> + int offset;
>> + int ret;
>> +
>> + if (val)
>> + *val = NULL;
> Seems like no point in making this call if !val
>
> Return -EINVAL if !val and remove the if (val) check below.
Will fix
>
>> + if (ep_name) {
>> + ret = xrt_md_get_endpoint(dev, blob, ep_name, regmap_name,
>> + &offset);
>> + if (ret) {
>> + dev_err(dev, "cannot get ep %s, regmap %s, ret = %d",
>> + ep_name, regmap_name, ret);
>> + return -EINVAL;
>> + }
>> + } else {
>> + offset = fdt_next_node(blob, -1, NULL);
>> + if (offset < 0) {
>> + dev_err(dev, "internal error, ret = %d", offset);
>> + return -EINVAL;
>> + }
>> + }
>> +
>> + if (val) {
>> + *val = fdt_getprop(blob, offset, prop, size);
>> + if (!*val) {
>> + dev_dbg(dev, "get ep %s, prop %s failed", ep_name, prop);
>> + return -EINVAL;
>> + }
>> + }
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(xrt_md_get_prop);
>> +
>> +static int xrt_md_setprop(struct device *dev, char *blob, int offset,
>> + const char *prop, const void *val, int size)
>> +{
>> + int ret;
>> +
>> + ret = fdt_setprop(blob, offset, prop, val, size);
>> + if (ret)
>> + dev_err(dev, "failed to set prop %d", ret);
>> +
>> + return ret;
>> +}
>> +
>> +int xrt_md_set_prop(struct device *dev, char *blob,
>> + const char *ep_name, const char *regmap_name,
>> + const char *prop, const void *val, int size)
>> +{
>> + int offset;
>> + int ret;
>> +
>> + if (ep_name) {
>> + ret = xrt_md_get_endpoint(dev, blob, ep_name,
>> + regmap_name, &offset);
>> + if (ret) {
>> + dev_err(dev, "cannot get node %s, ret = %d",
>> + ep_name, ret);
>> + return -EINVAL;
>> + }
>> + } else {
>> + offset = fdt_next_node(blob, -1, NULL);
>> + if (offset < 0) {
>> + dev_err(dev, "internal error, ret = %d", offset);
>> + return -EINVAL;
>> + }
>> + }
> This if-else block is a cut-n-paste from above.
>
> It is good to convert common logic blocks to macros or inline functions.
Will define a in-line function.
>
>> +
>> + ret = xrt_md_setprop(dev, blob, offset, prop, val, size);
>> + if (ret)
>> + dev_err(dev, "set prop %s failed, ret = %d", prop, ret);
>> +
>> + return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(xrt_md_set_prop);
>> +
>> +int xrt_md_copy_endpoint(struct device *dev, char *blob, const char *src_blob,
>> + const char *ep_name, const char *regmap_name,
>> + const char *new_ep_name)
>> +{
>> + int offset, target;
>> + int ret;
>> + struct xrt_md_endpoint ep = {0};
>> + const char *newepnm = new_ep_name ? new_ep_name : ep_name;
> How is this valid ?
>
> The xrt_md_get_endpoint searches by ep_name and if there names are not unique the second one will never be found.
ep_name in the firmware will always be unique. It is documented in xrt.rst
>
>> +
>> + ret = xrt_md_get_endpoint(dev, src_blob, ep_name, regmap_name,
>> + &offset);
>> + if (ret)
>> + return -EINVAL;
>> +
>> + ret = xrt_md_get_endpoint(dev, blob, newepnm, regmap_name, &target);
>> + if (ret) {
>> + ep.ep_name = newepnm;
>> + ret = __xrt_md_add_endpoint(dev, blob, &ep, &target,
>> + fdt_parent_offset(src_blob, offset) == 0);
>> + if (ret)
>> + return -EINVAL;
>> + }
>> +
>> + ret = xrt_md_overlay(dev, blob, target, src_blob, offset);
>> + if (ret)
>> + dev_err(dev, "overlay failed, ret = %d", ret);
>> +
>> + return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(xrt_md_copy_endpoint);
>> +
>> +char *xrt_md_dup(struct device *dev, const char *blob)
>> +{
>> + int ret;
>> + char *dup_blob;
>> +
>> + ret = xrt_md_create(dev, &dup_blob);
>> + if (ret)
>> + return NULL;
>> + ret = xrt_md_overlay(dev, dup_blob, -1, blob, -1);
> would memcpy-ing the blob work ?
Sure. Memcpy works. I will remove xrt_md_dup() and use memcpy.
>> + if (ret) {
>> + vfree(dup_blob);
>> + return NULL;
>> + }
>> +
>> + return dup_blob;
>> +}
>> +EXPORT_SYMBOL_GPL(xrt_md_dup);
>> +
>> +static int xrt_md_overlay(struct device *dev, char *blob, int target,
>> + const char *overlay_blob, int overlay_offset)
>> +{
>> + int property, subnode;
>> + int ret;
>> +
>> + WARN_ON(!blob || !overlay_blob);
>> +
>> + if (!blob) {
>> + dev_err(dev, "blob is NULL");
>> + return -EINVAL;
>> + }
>> +
>> + if (target < 0) {
>> + target = fdt_next_node(blob, -1, NULL);
>> + if (target < 0) {
>> + dev_err(dev, "invalid target");
>> + return -EINVAL;
>> + }
>> + }
>> + if (overlay_offset < 0) {
>> + overlay_offset = fdt_next_node(overlay_blob, -1, NULL);
>> + if (overlay_offset < 0) {
>> + dev_err(dev, "invalid overlay");
>> + return -EINVAL;
>> + }
>> + }
>> +
>> + fdt_for_each_property_offset(property, overlay_blob, overlay_offset) {
>> + const char *name;
>> + const void *prop;
>> + int prop_len;
>> +
>> + prop = fdt_getprop_by_offset(overlay_blob, property, &name,
>> + &prop_len);
>> + if (!prop || prop_len >= MAX_BLOB_SIZE) {
> could add prop_len < 0 as another sanity check
Will add.
>> + dev_err(dev, "internal error");
>> + return -EINVAL;
>> + }
>> +
>> + ret = xrt_md_setprop(dev, blob, target, name, prop,
>> + prop_len);
>> + if (ret) {
>> + dev_err(dev, "setprop failed, ret = %d", ret);
>> + return ret;
> overlay_blob is half done, as an error handling shouldn't it be undone ?
The error will only cause a half done blob. Nothing need to be undone.
>> + }
>> + }
>> +
>> + fdt_for_each_subnode(subnode, overlay_blob, overlay_offset) {
>> + const char *name = fdt_get_name(overlay_blob, subnode, NULL);
>> + int nnode;
>> +
>> + nnode = xrt_md_add_node(dev, blob, target, name);
>> + if (nnode == -FDT_ERR_EXISTS)
>> + nnode = fdt_subnode_offset(blob, target, name);
>> + if (nnode < 0) {
>> + dev_err(dev, "add node failed, ret = %d", nnode);
>> + return nnode;
>> + }
>> +
>> + ret = xrt_md_overlay(dev, blob, nnode, overlay_blob, subnode);
> eek, recursion.
>
> Any chance this will blow the stack ?
Will add max recursive depth (5).
>
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +int xrt_md_get_next_endpoint(struct device *dev, const char *blob,
>> + const char *ep_name, const char *regmap_name,
>> + char **next_ep, char **next_regmap)
>> +{
>> + int offset, ret;
>> +
>> + if (!ep_name) {
>> + ret = xrt_md_get_endpoint(dev, blob, XRT_MD_NODE_ENDPOINTS, NULL,
>> + &offset);
>> + } else {
>> + ret = xrt_md_get_endpoint(dev, blob, ep_name, regmap_name,
>> + &offset);
>> + }
>> +
>> + if (ret) {
>> + *next_ep = NULL;
>> + *next_regmap = NULL;
> could initialize next_ep and next_regmap to NULL outside the check.
Will move outside.
>> + return -EINVAL;
>> + }
>> +
>> + offset = ep_name ? fdt_next_subnode(blob, offset) :
>> + fdt_first_subnode(blob, offset);
>> + if (offset < 0) {
>> + *next_ep = NULL;
>> + *next_regmap = NULL;
>> + return -EINVAL;
>> + }
>> +
>> + *next_ep = (char *)fdt_get_name(blob, offset, NULL);
>> + *next_regmap = (char *)fdt_stringlist_get(blob, offset, XRT_MD_PROP_COMPATIBLE,
>> + 0, NULL);
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(xrt_md_get_next_endpoint);
>> +
>> +int xrt_md_get_compatible_endpoint(struct device *dev, const char *blob,
>> + const char *regmap_name, const char **ep_name)
>> +{
>> + int ep_offset;
>> +
>> + ep_offset = fdt_node_offset_by_compatible(blob, -1, regmap_name);
>> + if (ep_offset < 0) {
>> + *ep_name = NULL;
>> + return -ENOENT;
>> + }
>> +
>> + *ep_name = (char *)fdt_get_name(blob, ep_offset, NULL);
> why the cast ?
Will remove.
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(xrt_md_get_compatible_endpoint);
>> +
>> +void xrt_md_pack(struct device *dev, char *blob)
>> +{
>> + int ret;
>> +
>> + ret = fdt_pack(blob);
>> + if (ret)
>> + dev_err(dev, "pack failed %d", ret);
> maybe return int
Will return int.
>> +}
>> +EXPORT_SYMBOL_GPL(xrt_md_pack);
>> +
> The input/output of num_uuids parameter is tricky add a comment
Will modify to 'u32 num_uuids' and return the actual number
>> +int xrt_md_get_intf_uuids(struct device *dev, const char *blob,
>> + u32 *num_uuids, uuid_t *intf_uuids)
> what is intf ? change to 'interface' ?
yes. And will change to 'interface'.
>> +{
>> + int offset, count = 0;
>> + int ret;
>> + const char *uuid_str;
>> +
>> + ret = xrt_md_get_endpoint(dev, blob, XRT_MD_NODE_INTERFACES, NULL, &offset);
>> + if (ret)
>> + return -ENOENT;
>> +
>> + for (offset = fdt_first_subnode(blob, offset);
>> + offset >= 0;
>> + offset = fdt_next_subnode(blob, offset)) {
>> + uuid_str = fdt_getprop(blob, offset, XRT_MD_PROP_INTERFACE_UUID,
>> + NULL);
>> + if (!uuid_str) {
>> + dev_err(dev, "empty intf uuid node");
>> + return -EINVAL;
>> + }
>> +
>> + if (intf_uuids && count < *num_uuids) {
>> + ret = xrt_md_trans_str2uuid(dev, uuid_str,
>> + &intf_uuids[count]);
>> + if (ret)
>> + return -EINVAL;
>> + }
>> + count++;
> keep going even when count > num_uuids ?
>
> that seems like an error.
Will add check.
Thanks,
Lizhi
>
> Tom
>
>> + }
>> +
>> + *num_uuids = count;
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(xrt_md_get_intf_uuids);
Powered by blists - more mailing lists