[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210223183346.138575-2-sebastian.reichel@collabora.com>
Date: Tue, 23 Feb 2021 19:33:43 +0100
From: Sebastian Reichel <sebastian.reichel@...labora.com>
To: Sebastian Reichel <sebastian.reichel@...labora.com>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>
Cc: Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
kernel@...labora.com
Subject: [PATCHv1 1/4] ARM: dts: imx: ba16: add USB OTG VBUS enable GPIO
Add VBUS regulator GPIO information, so that USB OTG port can
also be used in host mode.
Signed-off-by: Sebastian Reichel <sebastian.reichel@...labora.com>
---
arch/arm/boot/dts/imx6q-ba16.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
index e4578ed3371e..4793ef5171aa 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -124,6 +124,10 @@ reg_usb_otg_vbus: regulator-usbotgvbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+
+ pinctrl-0 = <&pinctrl_usbotg_vbus>;
+ gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
};
@@ -575,6 +579,12 @@ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
>;
};
+ pinctrl_usbotg_vbus: usbotgvbusgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
+ >;
+ };
+
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
--
2.30.0
Powered by blists - more mailing lists