linux-kernel - Re: [PATCH v3 5/5] ibmvfc: reinitialize sub-CRQs and perform channel enquiry after LPM

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <0698062b-35b4-6cbe-aee3-a825026fb20f@linux.ibm.com>
Date:   Thu, 25 Feb 2021 14:12:21 -0800
From:   Tyrel Datwyler <tyreld@...ux.ibm.com>
To:     james.bottomley@...senpartnership.com
Cc:     martin.petersen@...cle.com, linux-scsi@...r.kernel.org,
        linuxppc-dev@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
        brking@...ux.ibm.com
Subject: Re: [PATCH v3 5/5] ibmvfc: reinitialize sub-CRQs and perform channel
 enquiry after LPM

On 2/25/21 1:42 PM, Tyrel Datwyler wrote:
> A live partition migration (LPM) results in a CRQ disconnect similar to
> a hard reset. In this LPM case the hypervisor moslty perserves the CRQ
> transport such that it simply needs to be reenabled. However, the
> capabilities may have changed such as fewer channels, or no channels at
> all. Further, its possible that there may be sub-CRQ support, but no
> channel support. The CRQ reenable path currently doesn't take any of
> this into consideration.
> 
> For simpilicty release and reinitialize sub-CRQs during reenable, and
> set do_enquiry and using_channels with the appropriate values to trigger
> channel renegotiation.
> 
> Signed-off-by: Tyrel Datwyler <tyreld@...ux.ibm.com>
> ---
>  drivers/scsi/ibmvscsi/ibmvfc.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
> index 1bb08e5f3674..6bbc2697ad5a 100644
> --- a/drivers/scsi/ibmvscsi/ibmvfc.c
> +++ b/drivers/scsi/ibmvscsi/ibmvfc.c
> @@ -903,6 +903,9 @@ static int ibmvfc_reenable_crq_queue(struct ibmvfc_host *vhost)
>  {
>  	int rc = 0;
>  	struct vio_dev *vdev = to_vio_dev(vhost->dev);
> +	unsigned long flags;
> +
> +	ibmvfc_release_sub_crqs(vhost);
>  
>  	/* Re-enable the CRQ */
>  	do {
> @@ -914,6 +917,15 @@ static int ibmvfc_reenable_crq_queue(struct ibmvfc_host *vhost)
>  	if (rc)
>  		dev_err(vhost->dev, "Error enabling adapter (rc=%d)\n", rc);
>  
> +	ibmvfc_init_sub_crqs(vhost);

Realized that if this fails it set the do_enquiry flag to zero which the locked
region below will then flip back to one. Need to move sub-crq init to after
locked region.

-T

> +
> +	spin_lock_irqsave(vhost->host->host_lock, flags);
> +	spin_lock(vhost->crq.q_lock);
> +	vhost->do_enquiry = 1;
> +	vhost->using_channels = 0;
> +	spin_unlock(vhost->crq.q_lock);
> +	spin_unlock_irqrestore(vhost->host->host_lock, flags);
> +
>  	return rc;
>  }
>  
>