[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAD=FV=WGoSv13Rpa+e3Z+u3mQRoe1a7OnS=e2GsFn5fzHHL2Qg@mail.gmail.com>
Date: Thu, 25 Feb 2021 14:25:44 -0800
From: Doug Anderson <dianders@...omium.org>
To: Bjorn Andersson <bjorn.andersson@...aro.org>
Cc: Stephen Boyd <swboyd@...omium.org>,
Alexandru M Stan <amstan@...omium.org>,
Matthias Kaehlcke <mka@...omium.org>,
Rob Clark <robdclark@...omium.org>,
Philip Chen <philipchen@...gle.com>,
Tzung-Bi Shih <tzungbi@...omium.org>,
Judy Hsiao <judyhsiao@...omium.org>,
Andy Gross <agross@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 12/13] arm64: dts: qcom: Add sc7180-lazor-pompom skus
Hi,
On Thu, Feb 25, 2021 at 2:13 PM Douglas Anderson <dianders@...omium.org> wrote:
>
> This is a trogdor variant. This is mostly a grab from the downstream
> tree with notable exceptions:
> - I skip -rev0. This was a super early build and there's no advantage
> of long term support.
> - In -rev1 I translate the handling of the USB hub like is done for
> similar boards. See the difference between the downstream and
> upstream 'sc7180-trogdor-lazor-r0.dts' for an example. This will
> need to be resolved when proper support for the USB hub is figured
> out upstream.
> - I remove sound node since sound hasn't landed upstream yet.
> - In incorporate the pending <https://crrev.com/c/2719075> for the
> keyboard.
>
> Cc: Philip Chen <philipchen@...gle.com>
> Cc: Matthias Kaehlcke <mka@...omium.org>
> Cc: Stephen Boyd <swboyd@...omium.org>
> Cc: Tzung-Bi Shih <tzungbi@...omium.org>
> Cc: Judy Hsiao <judyhsiao@...omium.org>
> Signed-off-by: Douglas Anderson <dianders@...omium.org>
> ---
>
> arch/arm64/boot/dts/qcom/Makefile | 4 +
> .../dts/qcom/sc7180-trogdor-pompom-r1-lte.dts | 14 +
> .../dts/qcom/sc7180-trogdor-pompom-r1.dts | 26 ++
> .../dts/qcom/sc7180-trogdor-pompom-r2-lte.dts | 14 +
> .../dts/qcom/sc7180-trogdor-pompom-r2.dts | 44 +++
> .../boot/dts/qcom/sc7180-trogdor-pompom.dtsi | 288 ++++++++++++++++++
> 6 files changed, 390 insertions(+)
As always I see a typo right after I hit send. ${SUBJECT} should be
"trogdor-pompom", not "lazor-pompom" for this and the next patch. I
copy/pastad from the previous patch (limozeen _is_ actually a lazor)
and didn't adjust properly.
I'm happy with any:
* to spin a -r2
* for Bjorn to fix when landing
* for this just to land since it's a harmless typo.
In any case I won't spin for now but I wanted to reply so if I do spin
for another reason I'll won't forget. ;-)
-Doug
Powered by blists - more mailing lists