linux-kernel - Re: [BISECTED] Kernel 5.11.x breaks pulseaudio

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <s5him6gnkdu.wl-tiwai@suse.de>
Date:   Thu, 25 Feb 2021 18:10:37 +0100
From:   Takashi Iwai <tiwai@...e.de>
To:     Heinz Diehl <htd+ml@...tha.org>
Cc:     linux-kernel@...r.kernel.org, lpoetter@...hat.com
Subject: Re: [BISECTED] Kernel 5.11.x breaks pulseaudio

On Thu, 25 Feb 2021 18:01:53 +0100,
Heinz Diehl wrote:
> 
> Hi,
> 
> from kernel 5.11 on, pulseaudio always resamples audio to the sample
> rate specified by default-sample-rate, despite "avoid-resampling =
> true". Audio that matches alternate-sample-rate is resampled in the same way.
> This means that both "alternate-sample-rate" and
> "avoid-resampling=true" are no longer working.
> 
> Steps to Reproduce:
> 1. Set "avoid-resampling = true" in daemon.conf
> 2. Set default-sample-rate = 44100 in daemon.conf
> 3. Set alternate-sample-rate 48000 in daemon.conf
> 4. Restart pulseaudio
> 5. Play a 48000 (or any other) audio file
> 
> Actual results:
> File is played as 44100 audio. Pacmd list-sink-inputs shows that
> resampling is happening. Play an audio file with any other sample
> rate, and it will be resampled to 44100.
> 
> Expected results:
> Audio file plays at 48000. Any other file is played in its own sample rate.
> 
> In my case, this affects USB audio. Tried both a Dragonfly Red, a
> Fostex HP-A4 and an unknown Soundblaster USB audio dac/amp, and all of
> them show the same behaviour as described here. Most probably, the
> regression affects all USB audio devices.
> 
> All kernels from the 5.10 series are fine. Here's the offending patch
> that introduced the regression. Reverting it on top of kernel 5.11 /
> 5.11.1 resolves the problem:
> 
> [root@...ara linux-stable]# git bisect good
> e4ea77f8e53f9accb9371fba34c189d0447ecce0 is the first bad commit
> commit e4ea77f8e53f9accb9371fba34c189d0447ecce0
> Author: Takashi Iwai <tiwai@...e.de>
> Date:   Mon Jan 11 09:16:11 2021 +0100
> 
>     ALSA: usb-audio: Always apply the hw constraints for implicit fb sync
>     
>     Since the commit 5a6c3e11c9c9 ("ALSA: usb-audio: Add hw constraint for
>     implicit fb sync"), we apply the hw constraints for the implicit
>     feedback sync to make the secondary open aligned with the already
>     opened stream setup.  This change assumed that the secondary open is
>     performed after the first stream has been already set up, and adds the
>     hw constraints to sync with the first stream's parameters only when
>     the EP setup for the first stream was confirmed at the open time.
>     However, most of applications handling the full-duplex operations do
>     open both playback and capture streams at first, then set up both
>     streams.  This results in skipping the additional hw constraints since
>     the counter-part stream hasn't been set up yet at the open of the
>     second stream, and it eventually leads to "incompatible EP" error in
>     the end.
>     
>     This patch corrects the behavior by always applying the hw constraints
>     for the implicit fb sync.  The hw constraint rules are defined so that
>     they check the sync EP dynamically at each invocation, instead.  This
>     covers the concurrent stream setups better and lets the hw refine
>     calls resolving to the right configuration.
>     
>     Also this patch corrects a minor error that has existed in the debug
>     print that isn't built as default.
>     
>     Fixes: 5a6c3e11c9c9 ("ALSA: usb-audio: Add hw constraint for implicit fb sync")
>     Link: https://lore.kernel.org/r/20210111081611.12790-1-tiwai@suse.de
>     Signed-off-by: Takashi Iwai <tiwai@...e.de>
> 
>  sound/usb/pcm.c | 171 +++++++++++++++++++++++++++++++++++---------------------
>  1 file changed, 108 insertions(+), 63 deletions(-)
> [root@...ara linux-stable]#
> 
> Feel free to contact me if you think I can help.

It's no regression but the right behavior.  This indicates that you're
trying a stream in 44.1kHz in one side of the full duplex stream while
48kHz in another rate, and this cannot work properly with the implicit
feedback devices.

It might have worked casually by some reason on your device, but it
was just a coincidence, as it didn't follow exactly what the implicit
feedback mode requires (i.e. the playback packet must follow exactly
the incoming recording packet).

That said, for the device like this, the sample rate has to be fixed
for both streams.

Hope that clarifies the situation.


Takashi