lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 25 Feb 2021 12:33:34 -0500
From:   George Kennedy <george.kennedy@...cle.com>
To:     Mike Rapoport <rppt@...ux.ibm.com>
Cc:     David Hildenbrand <david@...hat.com>,
        Andrey Konovalov <andreyknvl@...gle.com>,
        Andrew Morton <akpm@...ux-foundation.org>,
        Catalin Marinas <catalin.marinas@....com>,
        Vincenzo Frascino <vincenzo.frascino@....com>,
        Dmitry Vyukov <dvyukov@...gle.com>,
        Konrad Rzeszutek Wilk <konrad@...nok.org>,
        Will Deacon <will.deacon@....com>,
        Andrey Ryabinin <aryabinin@...tuozzo.com>,
        Alexander Potapenko <glider@...gle.com>,
        Marco Elver <elver@...gle.com>,
        Peter Collingbourne <pcc@...gle.com>,
        Evgenii Stepanov <eugenis@...gle.com>,
        Branislav Rankov <Branislav.Rankov@....com>,
        Kevin Brodsky <kevin.brodsky@....com>,
        Christoph Hellwig <hch@...radead.org>,
        kasan-dev <kasan-dev@...glegroups.com>,
        Linux ARM <linux-arm-kernel@...ts.infradead.org>,
        Linux Memory Management List <linux-mm@...ck.org>,
        LKML <linux-kernel@...r.kernel.org>,
        Dhaval Giani <dhaval.giani@...cle.com>
Subject: Re: [PATCH] mm, kasan: don't poison boot memory



On 2/25/2021 11:07 AM, Mike Rapoport wrote:
> On Thu, Feb 25, 2021 at 10:22:44AM -0500, George Kennedy wrote:
>>>>>> On 2/24/2021 5:37 AM, Mike Rapoport wrote:
>> Applied just your latest patch, but same failure.
>>
>> I thought there was an earlier comment (which I can't find now) that stated
>> that memblock_reserve() wouldn't reserve the page, which is what's needed
>> here.
> Actually, I think that memblock_reserve() should be just fine, but it seems
> I'm missing something in address calculation each time.
>
> What would happen if you stuck
>
> 	memblock_reserve(0xbe453000, PAGE_SIZE);
>
> say, at the beginning of find_ibft_region()?

Good news Mike!

The above hack in yesterday's last patch works - 10 successful reboots. 
See: "BE453" below for the hack.

I'll modify the patch to use "table_desc->address" instead, which is the 
physical address of the table.

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 7bdc023..c118dd5 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1551,6 +1551,7 @@ void __init acpi_boot_table_init(void)
      if (acpi_disabled)
          return;

+#if 0
      /*
       * Initialize the ACPI boot-time table parser.
       */
@@ -1558,6 +1559,7 @@ void __init acpi_boot_table_init(void)
          disable_acpi();
          return;
      }
+#endif

      acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf);

diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 740f3bdb..b045ab2 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -571,16 +571,6 @@ void __init reserve_standard_io_resources(void)

  }

-static __init void reserve_ibft_region(void)
-{
-    unsigned long addr, size = 0;
-
-    addr = find_ibft_region(&size);
-
-    if (size)
-        memblock_reserve(addr, size);
-}
-
  static bool __init snb_gfx_workaround_needed(void)
  {
  #ifdef CONFIG_PCI
@@ -1033,6 +1023,12 @@ void __init setup_arch(char **cmdline_p)
       */
      find_smp_config();

+    /*
+     * Initialize the ACPI boot-time table parser.
+     */
+    if (acpi_table_init())
+        disable_acpi();
+
      reserve_ibft_region();

      early_alloc_pgt_buf();
diff --git a/drivers/firmware/iscsi_ibft_find.c 
b/drivers/firmware/iscsi_ibft_find.c
index 64bb945..95fc1a6 100644
--- a/drivers/firmware/iscsi_ibft_find.c
+++ b/drivers/firmware/iscsi_ibft_find.c
@@ -47,7 +47,25 @@
  #define VGA_MEM 0xA0000 /* VGA buffer */
  #define VGA_SIZE 0x20000 /* 128kB */

-static int __init find_ibft_in_mem(void)
+static void __init *acpi_find_ibft_region(void)
+{
+    int i;
+    struct acpi_table_header *table = NULL;
+    acpi_status status;
+
+    if (acpi_disabled)
+        return NULL;
+
+    for (i = 0; i < ARRAY_SIZE(ibft_signs) && !ibft_addr; i++) {
+        status = acpi_get_table(ibft_signs[i].sign, 0, &table);
+        if (ACPI_SUCCESS(status))
+            return table;
+    }
+
+    return NULL;
+}
+
+static void __init *find_ibft_in_mem(void)
  {
      unsigned long pos;
      unsigned int len = 0;
@@ -70,35 +88,52 @@ static int __init find_ibft_in_mem(void)
                  /* if the length of the table extends past 1M,
                   * the table cannot be valid. */
                  if (pos + len <= (IBFT_END-1)) {
-                    ibft_addr = (struct acpi_table_ibft *)virt;
                      pr_info("iBFT found at 0x%lx.\n", pos);
-                    goto done;
+                    return virt;
                  }
              }
          }
      }
-done:
-    return len;
+
+    return NULL;
  }
+
+static void __init *find_ibft(void)
+{
+    /* iBFT 1.03 section 1.4.3.1 mandates that UEFI machines will
+     * only use ACPI for this */
+    if (!efi_enabled(EFI_BOOT))
+        return find_ibft_in_mem();
+    else
+        return acpi_find_ibft_region();
+}
+
  /*
   * Routine used to find the iSCSI Boot Format Table. The logical
   * kernel address is set in the ibft_addr global variable.
   */
-unsigned long __init find_ibft_region(unsigned long *sizep)
+void __init reserve_ibft_region(void)
  {
-    ibft_addr = NULL;
+    struct acpi_table_ibft *table;
+    unsigned long size;

-    /* iBFT 1.03 section 1.4.3.1 mandates that UEFI machines will
-     * only use ACPI for this */
+    table = find_ibft();
+    if (!table)
+        return;

-    if (!efi_enabled(EFI_BOOT))
-        find_ibft_in_mem();
-
-    if (ibft_addr) {
-        *sizep = PAGE_ALIGN(ibft_addr->header.length);
-        return (u64)virt_to_phys(ibft_addr);
-    }
+    size = PAGE_ALIGN(table->header.length);
+#if 0
+printk(KERN_ERR "XXX reserve_ibft_region: table=%llx, 
virt_to_phys(table)=%llx, size=%lx\n",
+    (u64)table, virt_to_phys(table), size);
+    memblock_reserve(virt_to_phys(table), size);
+#else
+printk(KERN_ERR "XXX reserve_ibft_region: table=%llx, 
0x00000000BE453000, size=%lx\n",
+    (u64)table, size);
+    memblock_reserve(0x00000000BE453000, size);
+#endif

-    *sizep = 0;
-    return 0;
+    if (efi_enabled(EFI_BOOT))
+        acpi_put_table(&table->header);
+    else
+        ibft_addr = table;
  }
diff --git a/include/linux/iscsi_ibft.h b/include/linux/iscsi_ibft.h
index b7b45ca..da813c8 100644
--- a/include/linux/iscsi_ibft.h
+++ b/include/linux/iscsi_ibft.h
@@ -26,13 +26,9 @@
   * mapped address is set in the ibft_addr variable.
   */
  #ifdef CONFIG_ISCSI_IBFT_FIND
-unsigned long find_ibft_region(unsigned long *sizep);
+void reserve_ibft_region(void);
  #else
-static inline unsigned long find_ibft_region(unsigned long *sizep)
-{
-    *sizep = 0;
-    return 0;
-}
+static inline void reserve_ibft_region(void) {}
  #endif

  #endif /* ISCSI_IBFT_H */


Debug from the above:

[    0.020293] last_pfn = 0xbfedc max_arch_pfn = 0x400000000
[    0.050778] ACPI: Early table checksum verification disabled
[    0.056475] ACPI: RSDP 0x00000000BFBFA014 000024 (v02 BOCHS )
[    0.057628] ACPI: XSDT 0x00000000BFBF90E8 00004C (v01 BOCHS BXPCFACP 
00000001      01000013)
[    0.059341] ACPI: FACP 0x00000000BFBF5000 000074 (v01 BOCHS BXPCFACP 
00000001 BXPC 00000001)
[    0.061043] ACPI: DSDT 0x00000000BFBF6000 00238D (v01 BOCHS BXPCDSDT 
00000001 BXPC 00000001)
[    0.062740] ACPI: FACS 0x00000000BFBFD000 000040
[    0.063673] ACPI: APIC 0x00000000BFBF4000 000090 (v01 BOCHS BXPCAPIC 
00000001 BXPC 00000001)
[    0.065369] ACPI: HPET 0x00000000BFBF3000 000038 (v01 BOCHS BXPCHPET 
00000001 BXPC 00000001)
[    0.067061] ACPI: BGRT 0x00000000BE49B000 000038 (v01 INTEL EDK2     
00000002      01000013)
[    0.068761] ACPI: iBFT 0x00000000BE453000 000800 (v01 BOCHS BXPCFACP 
00000000      00000000)
[    0.070461] XXX reserve_ibft_region: table=ffffffffff240000, 
0x00000000BE453000, size=1000
[    0.072231] check: Scanning 1 areas for low memory corruption

George
>   
>> [   30.308229] iBFT detected..
>> [   30.308796]
>> ==================================================================
>> [   30.308890] BUG: KASAN: use-after-free in ibft_init+0x134/0xc33
>> [   30.308890] Read of size 4 at addr ffff8880be453004 by task swapper/0/1
>> [   30.308890]
>> [   30.308890] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.11.0-f9593a0 #12
>> [   30.308890] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
>> 0.0.0 02/06/2015
>> [   30.308890] Call Trace:
>> [   30.308890]  dump_stack+0xdb/0x120
>> [   30.308890]  ? ibft_init+0x134/0xc33
>> [   30.308890]  print_address_description.constprop.7+0x41/0x60
>> [   30.308890]  ? ibft_init+0x134/0xc33
>> [   30.308890]  ? ibft_init+0x134/0xc33
>> [   30.308890]  kasan_report.cold.10+0x78/0xd1
>> [   30.308890]  ? ibft_init+0x134/0xc33
>> [   30.308890]  __asan_report_load_n_noabort+0xf/0x20
>> [   30.308890]  ibft_init+0x134/0xc33
>> [   30.308890]  ? write_comp_data+0x2f/0x90
>> [   30.308890]  ? ibft_check_initiator_for+0x159/0x159
>> [   30.308890]  ? write_comp_data+0x2f/0x90
>> [   30.308890]  ? ibft_check_initiator_for+0x159/0x159
>> [   30.308890]  do_one_initcall+0xc4/0x3e0
>> [   30.308890]  ? perf_trace_initcall_level+0x3e0/0x3e0
>> [   30.308890]  ? unpoison_range+0x14/0x40
>> [   30.308890]  ? ____kasan_kmalloc.constprop.5+0x8f/0xc0
>> [   30.308890]  ? kernel_init_freeable+0x420/0x652
>> [   30.308890]  ? __kasan_kmalloc+0x9/0x10
>> [   30.308890]  ? __sanitizer_cov_trace_pc+0x21/0x50
>> [   30.308890]  kernel_init_freeable+0x596/0x652
>> [   30.308890]  ? console_on_rootfs+0x7d/0x7d
>> [   30.308890]  ? __sanitizer_cov_trace_pc+0x21/0x50
>> [   30.308890]  ? rest_init+0xf0/0xf0
>> [   30.308890]  kernel_init+0x16/0x1d0
>> [   30.308890]  ? rest_init+0xf0/0xf0
>> [   30.308890]  ret_from_fork+0x22/0x30
>> [   30.308890]
>> [   30.308890] The buggy address belongs to the page:
>> [   30.308890] page:0000000001b7b17c refcount:0 mapcount:0
>> mapping:0000000000000000 index:0x1 pfn:0xbe453
>> [   30.308890] flags: 0xfffffc0000000()
>> [   30.308890] raw: 000fffffc0000000 ffffea0002ef9788 ffffea0002f91488
>> 0000000000000000
>> [   30.308890] raw: 0000000000000001 0000000000000000 00000000ffffffff
>> 0000000000000000
>> [   30.308890] page dumped because: kasan: bad access detected
>> [   30.308890] page_owner tracks the page as freed
>> [   30.308890] page last allocated via order 0, migratetype Movable,
>> gfp_mask 0x100dca(GFP_HIGHUSER_MOVABLE|__GFP_ZERO), pid 204, ts 28121288605
>> [   30.308890]  prep_new_page+0xfb/0x140
>> [   30.308890]  get_page_from_freelist+0x3503/0x5730
>> [   30.308890]  __alloc_pages_nodemask+0x2d8/0x650
>> [   30.308890]  alloc_pages_vma+0xe2/0x560
>> [   30.308890]  __handle_mm_fault+0x930/0x26c0
>> [   30.308890]  handle_mm_fault+0x1f9/0x810
>> [   30.308890]  do_user_addr_fault+0x6f7/0xca0
>> [   30.308890]  exc_page_fault+0xaf/0x1a0
>> [   30.308890]  asm_exc_page_fault+0x1e/0x30
>> [   30.308890] page last free stack trace:
>> [   30.308890]  free_pcp_prepare+0x122/0x290
>> [   30.308890]  free_unref_page_list+0xe6/0x490
>> [   30.308890]  release_pages+0x2ed/0x1270
>> [   30.308890]  free_pages_and_swap_cache+0x245/0x2e0
>> [   30.308890]  tlb_flush_mmu+0x11e/0x680
>> [   30.308890]  tlb_finish_mmu+0xa6/0x3e0
>> [   30.308890]  exit_mmap+0x2b3/0x540
>> [   30.308890]  mmput+0x11d/0x450
>> [   30.308890]  do_exit+0xaa6/0x2d40
>> [   30.308890]  do_group_exit+0x128/0x340
>> [   30.308890]  __x64_sys_exit_group+0x43/0x50
>> [   30.308890]  do_syscall_64+0x37/0x50
>> [   30.308890]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
>> [   30.308890]
>> [   30.308890] Memory state around the buggy address:
>> [   30.308890]  ffff8880be452f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> ff ff
>> [   30.308890]  ffff8880be452f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> ff ff
>> [   30.308890] >ffff8880be453000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> ff ff
>> [   30.308890]                    ^
>> [   30.308890]  ffff8880be453080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> ff ff
>> [   30.308890]  ffff8880be453100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> ff ff
>> [   30.308890]
>> ==================================================================
>>
>> George
>>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ