linux-kernel - Re: [PATCH net] net: phy: fix save wrong speed and duplex problem if autoneg is on

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <cb001681-137d-3352-b334-63d1a80cae36@huawei.com>
Date:   Sat, 27 Feb 2021 09:27:35 +0800
From:   Huazhong Tan <tanhuazhong@...wei.com>
To:     Jakub Kicinski <kuba@...nel.org>
CC:     <andrew@...n.ch>, <f.fainelli@...il.com>, <hkallweit1@...il.com>,
        <davem@...emloft.net>, <netdev@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        Guangbin Huang <huangguangbin2@...wei.com>
Subject: Re: [PATCH net] net: phy: fix save wrong speed and duplex problem if
 autoneg is on


On 2021/2/27 7:56, Jakub Kicinski wrote:
> On Fri, 26 Feb 2021 15:44:42 +0800 Huazhong Tan wrote:
>> From: Guangbin Huang <huangguangbin2@...wei.com>
>>
>> If phy uses generic driver and autoneg is on, enter command
>> "ethtool -s eth0 speed 50" will not change phy speed actually, but
>> command "ethtool eth0" shows speed is 50Mb/s because phydev->speed
>> has been set to 50 and no update later.
>>
>> And duplex setting has same problem too.
>>
>> However, if autoneg is on, phy only changes speed and duplex according to
>> phydev->advertising, but not phydev->speed and phydev->duplex. So in this
>> case, phydev->speed and phydev->duplex don't need to be set in function
>> phy_ethtool_ksettings_set() if autoneg is on.
> Can we get a Fixes tag for this one? How far back does this behavior
> date?
will add a fixes tag in V2, thanks.
> .