Message-ID: <YDy3xo3bMCqFtDhI@kernel.org>
Date:   Mon, 1 Mar 2021 11:45:42 +0200
From:   Mike Rapoport <rppt@...nel.org>
To:     Florian Fainelli <f.fainelli@...il.com>
Cc:     Serge Semin <Sergey.Semin@...kalelectronics.ru>,
        Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
        Serge Semin <fancer.lancer@...il.com>,
        Roman Gushchin <guro@...com>,
        Andrew Morton <akpm@...ux-foundation.org>, linux-mm@...ck.org,
        Kamal Dasu <kdasu.kdev@...il.com>,
        Paul Cercueil <paul@...pouillou.net>,
        Jiaxun Yang <jiaxun.yang@...goat.com>, iamjoonsoo.kim@....com,
        riel@...riel.com, Michal Hocko <mhocko@...nel.org>,
        linux-kernel@...r.kernel.org, kernel-team@...com,
        "open list:BROADCOM BMIPS MIPS ARCHITECTURE" 
        <linux-mips@...r.kernel.org>
Subject: Re: [PATCH v2 2/2] memblock: do not start bottom-up allocations with
 kernel_end

On Sun, Feb 28, 2021 at 07:50:45PM -0800, Florian Fainelli wrote:
> Hi Serge,
> 
> On 2/28/2021 3:08 PM, Serge Semin wrote:
> > Hi folks,
> > What you've got here seems a more complicated problem than it
> > could originally look like. Please, see my comments below.
> > 
> > (Note I've discarded some of the email logs, which of no interest
> > to the discovered problem. Please also note that I haven't got any
> > Broadcom hardware to test out a solution suggested below.)
> > 
> > On Sun, Feb 28, 2021 at 10:19:51AM -0800, Florian Fainelli wrote:
> >> Hi Mike,
> >>
> >> On 2/28/2021 1:00 AM, Mike Rapoport wrote:
> >>> Hi Florian,
> >>>
> >>> On Sat, Feb 27, 2021 at 08:18:47PM -0800, Florian Fainelli wrote:
> >>>>
> > 
> >>>> [...]
> > 
> >>>>
> >>>> Hi Roman, Thomas and other linux-mips folks,
> >>>>
> >>>> Kamal and myself have been unable to boot v5.11 on MIPS since this
> >>>> commit, reverting it makes our MIPS platforms boot successfully. We do
> >>>> not see a warning like this one in the commit message, instead what
> >>>> happens appear to be a corrupted Device Tree which prevents the parsing
> >>>> of the "rdb" node and leading to the interrupt controllers not being
> >>>> registered, and the system eventually not booting.
> >>>>
> >>>> The Device Tree is built-into the kernel image and resides at
> >>>> arch/mips/boot/dts/brcm/bcm97435svmb.dts.
> >>>>
> >>>> Do you have any idea what could be wrong with MIPS specifically here?
> > 
> > Most likely the problem you've discovered has been there for quite
> > some time. The patch you are referring to just caused it to be
> > triggered by extending the early allocation range. See before that
> > patch was accepted the early memory allocations had been performed
> > in the range:
> > [kernel_end, RAM_END].
> > The patch changed that, so the early allocations are done within
> > [RAM_START + PAGE_SIZE, RAM_END].
> > 
> > In normal situations it's safe to do that as long as all the critical
> > memory regions (including the memory residing a space below the
> > kernel) have been reserved. But as soon as a memory with some critical
> > structures haven't been reserved, the kernel may allocate it to be used
> > for instance for early initializations with obviously unpredictable but
> > most of the times unpleasant consequences.
> > 
> >>>
> >>> Apparently there is a memblock allocation in one of the functions called
> >>> from arch_mem_init() between plat_mem_setup() and
> >>> early_init_fdt_reserve_self().
> > 
> > Mike, alas according to the log provided by Florian that's not the reason
> > of the problem. Please, see my considerations below.
> > 
> >> [...]
> >>
> >> [    0.000000] Linux version 5.11.0-g5695e5161974 (florian@...alhost)
> >> (mipsel-linux-gcc (GCC) 8.3.0, GNU ld (GNU Binutils) 2.32) #84 SMP Sun
> >> Feb 28 10:01:50 PST 2021
> >> [    0.000000] CPU0 revision is: 00025b00 (Broadcom BMIPS5200)
> >> [    0.000000] FPU revision is: 00130001
> > 
> >> [    0.000000] memblock_add: [0x00000000-0x0fffffff]
> >> early_init_dt_scan_memory+0x160/0x1e0
> >> [    0.000000] memblock_add: [0x20000000-0x4fffffff]
> >> early_init_dt_scan_memory+0x160/0x1e0
> >> [    0.000000] memblock_add: [0x90000000-0xcfffffff]
> >> early_init_dt_scan_memory+0x160/0x1e0
> > 
> > Here the memory has been added to the memblock allocator.
> > 
> >> [    0.000000] MIPS: machine is Broadcom BCM97435SVMB
> >> [    0.000000] earlycon: ns16550a0 at MMIO32 0x10406b00 (options '')
> >> [    0.000000] printk: bootconsole [ns16550a0] enabled
> > 
> >> [    0.000000] memblock_reserve: [0x00aa7600-0x00aaa0a0]
> >> setup_arch+0x128/0x69c
> > 
> > Here the fdt memory has been reserved. (Note it's built into the
> > kernel.)
> > 
> >> [    0.000000] memblock_reserve: [0x00010000-0x018313cf]
> >> setup_arch+0x1f8/0x69c
> > 
> > Here the kernel itself together with built-in dtb have been reserved.
> > So far so good.
> > 
> >> [    0.000000] Initrd not found or empty - disabling initrd
> > 
> >> [    0.000000] memblock_alloc_try_nid: 10913 bytes align=0x40 nid=-1
> >> from=0x00000000 max_addr=0x00000000
> >> early_init_dt_alloc_memory_arch+0x40/0x84
> >> [    0.000000] memblock_reserve: [0x00001000-0x00003aa0]
> >> memblock_alloc_range_nid+0xf8/0x198
> >> [    0.000000] memblock_alloc_try_nid: 32680 bytes align=0x4 nid=-1
> >> from=0x00000000 max_addr=0x00000000
> >> early_init_dt_alloc_memory_arch+0x40/0x84
> >> [    0.000000] memblock_reserve: [0x00003aa4-0x0000ba4b]
> >> memblock_alloc_range_nid+0xf8/0x198
> > 
> > The log above most likely belongs to the call-chain:
> > setup_arch()
> > +-> arch_mem_init()
> >     +-> device_tree_init() - BMIPS specific method
> >         +-> unflatten_and_copy_device_tree()
> > 
> > So to speak here we've copied the fdt from the original space
> > [0x00aa7600-0x00aaa0a0] into [0x00001000-0x00003aa0] and unflattened
> > it to [0x00003aa4-0x0000ba4b].
> > 
> > The problem is that a bit later the next call-chain is performed:
> > setup_arch()
> > +-> plat_smp_setup()
> >     +-> mp_ops->smp_setup(); - registered by prom_init()->register_bmips_smp_ops();
> >         +-> if (!board_ebase_setup)
> >                  board_ebase_setup = &bmips_ebase_setup;
> > 
> > So at the moment of the CPU traps initialization the bmips_ebase_setup()
> > method is called. What trap_init() does isn't compatible with the
> > allocation performed by the unflatten_and_copy_device_tree() method.
> > See the next comment.
> > 
> >> [    0.000000] memblock_alloc_try_nid: 25 bytes align=0x4 nid=-1
> >> from=0x00000000 max_addr=0x00000000
> >> early_init_dt_alloc_memory_arch+0x40/0x84

...

> >> [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536
> >> bytes, linear)
> > 
> >> [    0.000000] memblock_reserve: [0x00000000-0x000003ff]
> >> trap_init+0x70/0x4e8
> > 
> > Most likely someplace here the corruption has happened. The log above
> > has just reserved a memory for NMI/reset vectors:
> > arch/mips/kernel/traps.c: trap_init(void): Line 2373.
> > 
> > But then the board_ebase_setup() pointer is dereferenced and called,
> > which has been initialized with bmips_ebase_setup() earlier and which
> > overwrites the ebase variable with: 0x80001000 as this is
> > CPU_BMIPS5000 CPU. So any further calls of the functions like
> > set_handler()/set_except_vector()/set_vi_srs_handler()/etc may cause a
> > corruption of the memory above 0x80001000, which as we have discovered
> > belongs to fdt and unflattened device tree.
> > 
> >> [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> >> [    0.000000] Memory: 2045268K/2097152K available (8226K kernel code,
> >> 1070K rwdata, 1336K rodata, 13808K init, 260K bss, 51884K reserved, 0K
> >> cma-reserved, 1835008K highmem)
> >> [    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> >> [    0.000000] rcu: Hierarchical RCU implementation.
> >> [    0.000000] rcu:     RCU event tracing is enabled.
> >> [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay
> >> is 25 jiffies.
> >> [    0.000000] NR_IRQS: 256
> > 
> >> [    0.000000] OF: Bad cell count for /rdb
> >> [    0.000000] irq_bcm7038_l1: failed to remap intc L1 registers
> >> [    0.000000] OF: of_irq_init: children remain, but no parents
> > 
> > So here is the first time we have got the consequence of the corruption
> > popped up. Luckily it's just the "Bad cells count" error. We could have
> > got much less obvious log here up to getting a crash at some place
> > further...
> > 
> >> [    0.000000] random: get_random_bytes called from
> >> start_kernel+0x444/0x654 with crng_init=0
> >> [    0.000000] sched_clock: 32 bits at 250 Hz, resolution 4000000ns,
> >> wraps every 8589934590000000ns
> > 
> >>
> >> and with your patch applied which unfortunately did not work we have the
> >> following:
> >>
> >> [...]
> > 
> > So a patch like this shall workaround the corruption:
> > 
> > --- a/arch/mips/bmips/setup.c
> > +++ b/arch/mips/bmips/setup.c
> > @@ -174,6 +174,8 @@ void __init plat_mem_setup(void)
> >  
> >  	__dt_setup_arch(dtb);
> >  
> > +	memblock_reserve(0x0, 0x1000 + 0x100*64);
> > +
> >  	for (q = bmips_quirk_list; q->quirk_fn; q++) {
> >  		if (of_flat_dt_is_compatible(of_get_flat_dt_root(),
> >  					     q->compatible)) {
> 
> This patch works, thanks a lot for the troubleshooting and analysis! How
> about the following which would be more generic and works as well and
> should be more universal since it does not require each architecture to
> provide an appropriate call to memblock_reserve():
> 
> diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
> index e0352958e2f7..b0a173b500e8 100644
> --- a/arch/mips/kernel/traps.c
> +++ b/arch/mips/kernel/traps.c
> @@ -2367,10 +2367,7 @@ void __init trap_init(void)
> 
>         if (!cpu_has_mips_r2_r6) {
>                 ebase = CAC_BASE;
> -               ebase_pa = virt_to_phys((void *)ebase);
>                 vec_size = 0x400;
> -
> -               memblock_reserve(ebase_pa, vec_size);
>         } else {
>                 if (cpu_has_veic || cpu_has_vint)
>                         vec_size = 0x200 + VECTORSPACING*64;
> @@ -2410,6 +2407,14 @@ void __init trap_init(void)
> 
>         if (board_ebase_setup)
>                 board_ebase_setup();
> +
> +       /* board_ebase_setup() can change the exception base address
> +        * reserve it now after changes were made.
> +        */
> +       if (!cpu_has_mips_r2_r6) {
> +               ebase_pa = virt_to_phys((void *)ebase);
> +               memblock_reserve(ebase_pa, vec_size);
> +       }

With this it's still possible to have memblock allocations around ebase_pa
before it is reserved.

I think we have two options here to solve it in more or less generic way:

* split the reservation of ebase from traps_init() and move it earlier to
setup_arch(). I didn't check what board_ebase_setup() do, if they need to
allocate memory it would not work.

* add an API to memblock to set lower limit for allocations and then set
the lower limit, to e.g. kernel load address in arch_mem_init(). This may
add complexity for configurations with relocatable kernel and kaslr.

>         per_cpu_trap_init(true);
>         memblock_set_bottom_up(false);

-- 
Sincerely yours,
Mike.

Powered by blists - more mailing lists